It is very important to have Zabbix system properly tuned for maximum performance.
General advice on hardware:
Many parameters may be tuned to get optimal performance.
General rule - keep value of this parameter as low as possible. Every additional instance of zabbix_server adds known overhead, in the same time, parallelism is increased. Optimal number of instances is achieved when queue, on average, contains minimum number of parameters (ideally, 0 at any given moment). This value can be monitored by using internal check zabbix[queue].
Optimal value is 3.
MySQL only. It is recommended to use DBSocket for connection to the database. That is the fastest and the most secure way.
This is probably the most important part of Zabbix tuning. Zabbix heavily depends on the availability and performance of database engine.
Problems related to the frontend performance may be diagnosed using the frontend debug mode.
Since Zabbix 2.2 processes change their commandlines to display current activity and meaningful statistics, like:
UID PID PPID C STIME TTY TIME CMD zabbix22 4584 1 0 14:55 ? 00:00:00 zabbix_server -c /home/zabbix22/zabbix_server.conf zabbix22 4587 4584 0 14:55 ? 00:00:00 zabbix_server: configuration syncer [synced configuration in 0.041169 sec, idle 60 sec] zabbix22 4588 4584 0 14:55 ? 00:00:00 zabbix_server: db watchdog [synced alerts config in 0.018748 sec, idle 60 sec] zabbix22 4608 4584 0 14:55 ? 00:00:00 zabbix_server: timer #1 [updated 0 hosts, suppressed 0 events in 0.000472 sec, idle 59 sec] zabbix22 4637 4584 0 14:55 ? 00:00:01 zabbix_server: history syncer #3 [processed 0 values, 0 triggers in 0.000036 sec, idle 1 sec] zabbix22 4657 4584 0 14:55 ? 00:00:00 zabbix_server: vmware collector #1 [updated 0, removed 0 VMware services in 0.000004 sec, idle 5 sec] zabbix22 4670 1 0 14:55 ? 00:00:00 zabbix_proxy -c /home/zabbix22/zabbix_proxy.conf zabbix22 4673 4670 0 14:55 ? 00:00:00 zabbix_proxy: configuration syncer [synced config 15251 bytes in 0.111861 sec, idle 60 sec] zabbix22 4674 4670 0 14:55 ? 00:00:00 zabbix_proxy: heartbeat sender [sending heartbeat message success in 0.013643 sec, idle 30 sec] zabbix22 4688 4670 0 14:55 ? 00:00:00 zabbix_proxy: icmp pinger #1 [got 1 values in 1.811128 sec, idle 5 sec] zabbix22 4690 4670 0 14:55 ? 00:00:00 zabbix_proxy: housekeeper [deleted 9870 records in 0.233491 sec, idle 3599 sec] zabbix22 4701 4670 0 14:55 ? 00:00:08 zabbix_proxy: http poller #2 [got 1 values in 0.024105 sec, idle 1 sec] zabbix22 4707 4670 0 14:55 ? 00:00:00 zabbix_proxy: history syncer #4 [processed 0 values, 0 triggers in 0.000039 sec, idle 1 sec] zabbix22 4738 1 0 14:55 ? 00:00:00 zabbix_agentd -c /home/zabbix22/zabbix_agentd.conf zabbix22 4739 4738 0 14:55 ? 00:00:00 zabbix_agentd: collector [idle 1 sec] zabbix22 4740 4738 0 14:55 ? 00:00:00 zabbix_agentd: listener #1 [waiting for connection] zabbix22 4741 4738 0 14:55 ? 00:00:00 zabbix_agentd: listener #2 [processing request]
The main process is an exception. Instead of current activity the original commandline is shown. This helps to distinguish processes on systems with multiple Zabbix instances.
This feature is not implemented for Microsoft Windows.
If logging level is set to DebugLevel=4 these activity and statistics messages are also written into log file.
On Linux systems
ps command can be used together with
watch command for observing how Zabbix is doing.
For example, to run
ps command 5 times per second to see process activities:
watch -n 0.2 ps -fu zabbix
To show only Zabbix proxy and agent processes:
watch -tn 0.2 'ps -f -C zabbix_proxy -C zabbix_agentd'
To show only history syncer processes:
watch -tn 0.2 'ps -fC zabbix_server | grep history'
ps command produces a wide output (approximately 190 columns) as some activity messages are long. If your terminal has less than 190 columns of text you can try
watch -tn 0.2 'ps -o cmd -C zabbix_server -C zabbix_proxy -C zabbix_agentd'
to display only commandlines without UID, PID, start time etc.
top command also can be used for observing Zabbix performance. Pressing 'c' key in
top shows processes with their commandlines.
In our tests on Linux
atop correctly displayed changing activities of Zabbix processes, but
htop was not displaying changing activities.
watch command is not installed, a similar effect can be achieved with
while [ 1 ]; do ps x; sleep 0.2; clear; done
watch command is not available, one can try
while [ 1 ]; do ps -fu zabbix; sleep 1; clear; done
By default the
ps command does not show changing activities. One option is to use
watch command is not installed, a periodically updated list of processes can be shown with
while [ 1 ]; do /usr/ucb/ps gxww; sleep 1; clear; done
On Solaris 11:
/usr/ucb/psis not installed by default. You may need to install ucb package, e.g.
pkg install compatibility/ucb,
sleepcommand accepts not only whole seconds but also fractions of second (e.g.