This is an old revision of the document!
Some of the most used SNMP OIDs are translated automatically to a numeric representation by Zabbix. For example, ifIndex is translated to 184.108.40.206.220.127.116.11.1.1, ifIndex.0 is translated to 18.104.22.168.22.214.171.124.1.1.0.
The table contains list of the special OIDs.
|ifIndex||126.96.36.199.188.8.131.52.1.1||A unique value for each interface.|
|ifDescr||184.108.40.206.220.127.116.11.1.2||A textual string containing information about the interface.This string should include the name of the manufacturer, the product name and the version of the hardware interface.|
|ifType||18.104.22.168.22.214.171.124.1.3||The type of interface, distinguished according to the physical/link protocol(s) immediately 'below' the network layer in the protocol stack.|
|ifMtu||126.96.36.199.188.8.131.52.1.4||The size of the largest datagram which can be sent / received on the interface, specified in octets.|
|ifSpeed||184.108.40.206.220.127.116.11.1.5||An estimate of the interface's current bandwidth in bits per second.|
|ifPhysAddress||18.104.22.168.22.214.171.124.1.6||The interface's address at the protocol layer immediately `below' the network layer in the protocol stack.|
|ifAdminStatus||126.96.36.199.188.8.131.52.1.7||The current administrative state of the interface.|
|ifOperStatus||184.108.40.206.220.127.116.11.1.8||The current operational state of the interface.|
|ifInOctets||18.104.22.168.22.214.171.124.1.10||The total number of octets received on the interface, including framing characters.|
|ifInUcastPkts||126.96.36.199.188.8.131.52.1.11||The number of subnetwork-unicast packets delivered to a higher-layer protocol.|
|ifInNUcastPkts||184.108.40.206.220.127.116.11.1.12||The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.|
|ifInDiscards||18.104.22.168.22.214.171.124.1.13||The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.|
|ifInErrors||126.96.36.199.188.8.131.52.1.14||The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.|
|ifInUnknownProtos||184.108.40.206.220.127.116.11.1.15||The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.|
|ifOutOctets||18.104.22.168.22.214.171.124.1.16||The total number of octets transmitted out of the interface, including framing characters.|
|ifOutUcastPkts||126.96.36.199.188.8.131.52.1.17||The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.|
|ifOutNUcastPkts||184.108.40.206.220.127.116.11.1.18||The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.|
|ifOutDiscards||18.104.22.168.22.214.171.124.1.19||The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.|
|ifOutErrors||126.96.36.199.188.8.131.52.1.20||The number of outbound packets that could not be transmitted because of errors.|
|ifOutQLen||184.108.40.206.220.127.116.11.1.21||The length of the output packet queue (in packets).|