ZABBIX Forums  
  #1  
Old 17-01-2017, 15:48
fvidal fvidal is offline
Junior Member
 
Join Date: Jan 2017
Posts: 11
Default Configuración de vistas en ZABBIX

Hola gente.
mi nombre es Fernando, estoy empezando a utilzar ZABBIX, porque tengo que analizar el reemplazo del software de monitoreo que tenemos ahora por Zabbix.
Estoy leyendo un poco, y voy aprendiendo en el proceso. el primer problema que me encontré es que de por si no tiene el mismo concepto que el otro programa, donde declaro los equipos a monitoreo y después configuro las diferentes vistas necesarias, como ser Top 20 de utilización de disco, top 20 de utilización de memoria, top 20 de utilización de CPU, ping alive, http alive, entre otras.

alguien me podría indicar como se hace para poder tener una vista de este tipo, por ejemplo utilización de discos,??

Gracias!
Reply With Quote
  #2  
Old 18-01-2017, 02:38
sancho sancho is offline
Senior Member
 
Join Date: Mar 2015
Location: Madrid, Spain
Posts: 112
Default

Hola Fernando,
Como bien dices, creo que con Zabbix es otro concepto de monitorización, yo por ejemplo lo utilizo para alertas y control, avisos de capacidad de disco excedido, consumo de cpu, servicios críticos que no se deben de parar y acciones automáticas que se deben de ejecutar cuando falla alguno de estos servicios, entre otras muchas cosas…
Sobre las pantallas, tengo creadas pantallas donde me muestra los gráficos del consumo de RAM o de HD ocupado de todos los servidores. Lo único parecido a lo que tú dices es un sql que hago, atacando directamente a la BBDD, mensualmente sobre cuota de consumo de HD de un grupo en concreto de host´s.
La consulta es obra de un compañero de este foro, te pongo el enlace al post por si te interesa:
https://www.zabbix.com/forum/showthread.php?t=51403
Posiblemente haya pantallas que puedan sacarse con la información que necesitas, en este foro hay gente que lleva mucho tiempo con Zabbix y muy buenos profesionales.
Un saludo y bienvenido.
Reply With Quote
  #3  
Old 18-01-2017, 18:33
fvidal fvidal is offline
Junior Member
 
Join Date: Jan 2017
Posts: 11
Default Se cae servicio Zabbix_server

Buenas, ahora me encontré con otro problema, que tengo que solucionarlo antes de seguir analizando si me sirve para lo que necesito.
Se me cae el servicio Zabbix_server. rebooteo el Ubuntu 14.04 y a los 5 minutos esta caido.
lo inicio y lo mismo, se cae a los 5 minutos aproximadamente.
por un lado en el logs me dice:
[file:dbconfig.c,line:652] zbx_mem_realloc(): out of memory (requested 192 bytes)
[file:dbconfig.c,line:652] zbx_mem_realloc(): please increase CacheSize configuration parameter

las configuración de memoria ya las aumente.

si alquilen puede darme una mano, les agradecería.

SALUDOS
Reply With Quote
  #4  
Old 19-01-2017, 11:30
sancho sancho is offline
Senior Member
 
Join Date: Mar 2015
Location: Madrid, Spain
Posts: 112
Default

Hola Fernando,
Que hardware tiene el servidor donde estas probando zabbix y cuantos equipos estás monitorizando ahora?
Que configuracion tienes en el zabbix_server.conf???
Quote:
### Option: CacheSize
# Size of configuration cache, in bytes.
# Shared memory size for storing host, item and trigger data.
#
# Mandatory: no
# Range: 128K-8G
# Default:
# CacheSize=8M

### Option: CacheUpdateFrequency
# How often Zabbix will perform update of configuration cache, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# CacheUpdateFrequency=60

### Option: StartDBSyncers
# Number of pre-forked instances of DB Syncers.
#
# Mandatory: no
# Range: 1-100
# Default:
# StartDBSyncers=4

### Option: HistoryCacheSize
# Size of history cache, in bytes.
# Shared memory size for storing history data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# HistoryCacheSize=16M

### Option: HistoryIndexCacheSize
# Size of history index cache, in bytes.
# Shared memory size for indexing history cache.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# HistoryIndexCacheSize=4M

### Option: TrendCacheSize
# Size of trend cache, in bytes.
# Shared memory size for storing trends data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# TrendCacheSize=4M

### Option: ValueCacheSize
# Size of history value cache, in bytes.
# Shared memory size for caching item history data requests.
# Setting to 0 disables value cache.
#
# Mandatory: no
# Range: 0,128K-64G
# Default:
# ValueCacheSize=8M
Mira este Post, a lo mejor te ayuda.

https://www.zabbix.com/forum/showthread.php?t=47781

Un saludo.
Reply With Quote
  #5  
Old 19-01-2017, 12:16
Hernandes Martins Hernandes Martins is offline
Senior Member
Zabbix certified specialist
 
Join Date: Apr 2011
Location: São Paulo - Brasil
Posts: 550
Send a message via Skype™ to Hernandes Martins
Talking

Hola a todos,

Yo he escribido un post con el tema, zabbix ser is not running, mira que su problema y solucíon esta en final del post.

http://hernandesmartins.blogspot.com...que-hacer.html

https://www.youtube.com/watch?v=sE0q0RZRISg&t=54s

Saludos.
__________________
__

Att.
Hernandes Martins

http://www.unirede.net - Zabbix Brazil Premium Partner
Blog: http://hernandesmartins.blogspot.com.br/
Skype: hernandss | Youtube: HernandesMartins
São Paulo - SP - Brazil Comunnity: http://zabbixbrasil.org/
Grupo Facebook
Zabbix LATAM Español https://www.facebook.com/groups/zabbixlatam/
Zabbix Brasil Portugues https://www.facebook.com/groups/zabbixbrasil/
Reply With Quote
  #6  
Old 19-01-2017, 14:44
fvidal fvidal is offline
Junior Member
 
Join Date: Jan 2017
Posts: 11
Default

Hola!!!!,
estuve leyendo los post, de por si es un problema de recursos por lo que veo en el log, ya cambie el zabbix_server.conf la memoria, CacheSize lo puse en 2048M el 50% de la memoria que tiene el servidor en si.
ademas modifique todo los otros parametros de memoria tambien.

les paso mas datos de mi Zabbix, es un servidor virtual en VMware, baje el appliance de la web de Zabbix 3.2.3. lo pase primero por el Vmware desktop y después lo converti a Vcenter (ESXI), como dice en la WEB de Zabbix.
es un servidor con 2 Core y 4G de RAM.
les dejo el archivo Zabbix_server.conf como esta ahora, con todas las modificaciones que hice.

tengo unos 150 servidores para monitorear por SNMP, pero solo puse 70 ahora, que son el parque de windows server que tengo.

# This is a configuration file for Zabbix server daemon
# To get more information about Zabbix, visit http://www.zabbix.com

############ GENERAL PARAMETERS #################

### Option: ListenPort
# Listen port for trapper.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# ListenPort=10051

### Option: SourceIP
# Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=

### Option: LogType
# Specifies where log messages are written to:
# system - syslog
# file - file specified with LogFile parameter
# console - standard output
#
# Mandatory: no
# Default:
# LogType=file

### Option: LogFile
# Log file name for LogType 'file' parameter.
#
# Mandatory: no
# Default:
# LogFile=

LogFile=/var/log/zabbix/zabbix_server.log

### Option: LogFileSize
# Maximum size of log file in MB.
# 0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1

LogFileSize=0

### Option: DebugLevel
# Specifies debug level:
# 0 - basic information about starting and stopping of Zabbix processes
# 1 - critical information
# 2 - error information
# 3 - warnings
# 4 - for debugging (produces lots of information)
# 5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
# DebugLevel=3

### Option: PidFile
# Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_server.pid

PidFile=/var/run/zabbix/zabbix_server.pid

### Option: DBHost
# Database host name.
# If set to localhost, socket is used for MySQL.
# If set to empty string, socket is used for PostgreSQL.
#
# Mandatory: no
# Default:
# DBHost=localhost

### Option: DBName
# Database name.
# For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
#
# Mandatory: yes
# Default:
# DBName=

DBName=zabbix

### Option: DBSchema
# Schema name. Used for IBM DB2 and PostgreSQL.
#
# Mandatory: no
# Default:
# DBSchema=

### Option: DBUser
# Database user. Ignored for SQLite.
#
# Mandatory: no
# Default:
# DBUser=

DBUser=zabbix

### Option: DBPassword
# Database password. Ignored for SQLite.
# Comment this line if no password is used.
#
# Mandatory: no
# Default:
# DBPassword=
DBPassword=1stA3ei0Z4

### Option: DBSocket
# Path to MySQL socket.
#
# Mandatory: no
# Default:
# DBSocket=/tmp/mysql.sock

### Option: DBPort
# Database port when not using local socket. Ignored for SQLite.
#
# Mandatory: no
# Range: 1024-65535
# Default (for MySQL):
# DBPort=3306

############ ADVANCED PARAMETERS ################

### Option: StartPollers
# Number of pre-forked instances of pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPollers=5

### Option: StartIPMIPollers
# Number of pre-forked instances of IPMI pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartIPMIPollers=0

### Option: StartPollersUnreachable
# Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
# At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
# are started.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPollersUnreachable=1

### Option: StartTrappers
# Number of pre-forked instances of trappers.
# Trappers accept incoming connections from Zabbix sender, active agents and active proxies.
# At least one trapper process must be running to display server availability and view queue
# in the frontend.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartTrappers=5

### Option: StartPingers
# Number of pre-forked instances of ICMP pingers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPingers=1

### Option: StartDiscoverers
# Number of pre-forked instances of discoverers.
#
# Mandatory: no
# Range: 0-250
# Default:
# StartDiscoverers=1

### Option: StartHTTPPollers
# Number of pre-forked instances of HTTP pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartHTTPPollers=1

### Option: StartTimers
# Number of pre-forked instances of timers.
# Timers process time-based trigger functions and maintenance periods.
# Only the first timer process handles the maintenance periods.
#
# Mandatory: no
# Range: 1-1000
# Default:
# StartTimers=1

### Option: StartEscalators
# Number of pre-forked instances of escalators.
#
# Mandatory: no
# Range: 0-100
# Default:
# StartEscalators=1

### Option: JavaGateway
# IP address (or hostname) of Zabbix Java gateway.
# Only required if Java pollers are started.
#
# Mandatory: no
# Default:
# JavaGateway=
JavaGateway=127.0.0.1

### Option: JavaGatewayPort
# Port that Zabbix Java gateway listens on.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# JavaGatewayPort=10052

### Option: StartJavaPollers
# Number of pre-forked instances of Java pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartJavaPollers=0
StartJavaPollers=5

### Option: StartVMwareCollectors
# Number of pre-forked vmware collector instances.
#
# Mandatory: no
# Range: 0-250
# Default:
# StartVMwareCollectors=0

### Option: VMwareFrequency
# How often Zabbix will connect to VMware service to obtain a new data.
#
# Mandatory: no
# Range: 10-86400
# Default:
# VMwareFrequency=60

### Option: VMwarePerfFrequency
# How often Zabbix will connect to VMware service to obtain performance data.
#
# Mandatory: no
# Range: 10-86400
# Default:
# VMwarePerfFrequency=60

### Option: VMwareCacheSize
# Size of VMware cache, in bytes.
# Shared memory size for storing VMware data.
# Only used if VMware collectors are started.
#
# Mandatory: no
# Range: 512K-8G
# Default:
# VMwareCacheSize=2048M

### Option: VMwareTimeout
# Specifies how many seconds vmware collector waits for response from VMware service.
#
# Mandatory: no
# Range: 1-300
# Default:
# VMwareTimeout=10

### Option: SNMPTrapperFile
# Temporary file used for passing data from SNMP trap daemon to the server.
# Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
#
# Mandatory: no
# Default:
# SNMPTrapperFile=/tmp/zabbix_traps.tmp
SNMPTrapperFile=/var/log/zabbix/snmptrapfmt.log

### Option: StartSNMPTrapper
# If 1, SNMP trapper process is started.
#
# Mandatory: no
# Range: 0-1
# Default:
# StartSNMPTrapper=0
StartSNMPTrapper=1

### Option: ListenIP
# List of comma delimited IP addresses that the trapper should listen on.
# Trapper will listen on all network interfaces if this parameter is missing.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0

# ListenIP=127.0.0.1

### Option: HousekeepingFrequency
# How often Zabbix will perform housekeeping procedure (in hours).
# Housekeeping is removing outdated information from the database.
# To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
# hours of outdated information are deleted in one housekeeping cycle, for each item.
# To lower load on server startup housekeeping is postponed for 30 minutes after server start.
# With HousekeepingFrequency=0 the housekeeper can be only executed using the runtime control option.
# In this case the period of outdated information deleted in one housekeeping cycle is 4 times the
# period since the last housekeeping cycle, but not less than 4 hours and not greater than 4 days.
#
# Mandatory: no
# Range: 0-24
# Default:
# HousekeepingFrequency=1

### Option: MaxHousekeeperDelete
# The table "housekeeper" contains "tasks" for housekeeping procedure in the format:
# [housekeeperid], [tablename], [field], [value].
# No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])
# will be deleted per one task in one housekeeping cycle.
# SQLite3 does not use this parameter, deletes all corresponding rows without a limit.
# If set to 0 then no limit is used at all. In this case you must know what you are doing!
#
# Mandatory: no
# Range: 0-1000000
# Default:
# MaxHousekeeperDelete=5000

### Option: SenderFrequency
# How often Zabbix will try to send unsent alerts (in seconds).
#
# Mandatory: no
# Range: 5-3600
# Default:
# SenderFrequency=30

### Option: CacheSize
# Size of configuration cache, in bytes.
# Shared memory size for storing host, item and trigger data.
#
# Mandatory: no
# Range: 512K-8G
# Default:
# CacheSize=2048M

### Option: CacheUpdateFrequency
# How often Zabbix will perform update of configuration cache, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# CacheUpdateFrequency=60

### Option: StartDBSyncers
# Number of pre-forked instances of DB Syncers.
#
# Mandatory: no
# Range: 1-100
# Default:
# StartDBSyncers=4

### Option: HistoryCacheSize
# Size of history cache, in bytes.
# Shared memory size for storing history data.
#
# Mandatory: no
# Range: 512K-2G
# Default:
# HistoryCacheSize=2048M

### Option: HistoryIndexCacheSize
# Size of history index cache, in bytes.
# Shared memory size for indexing history cache.
#
# Mandatory: no
# Range: 512K-2G
# Default:
# HistoryIndexCacheSize=2048M

### Option: TrendCacheSize
# Size of trend cache, in bytes.
# Shared memory size for storing trends data.
#
# Mandatory: no
# Range: 512K-2G
# Default:
# TrendCacheSize=2048M

### Option: ValueCacheSize
# Size of history value cache, in bytes.
# Shared memory size for caching item history data requests.
# Setting to 0 disables value cache.
#
# Mandatory: no
# Range: 0,512K-64G
# Default:
# ValueCacheSize=2048M

### Option: Timeout
# Specifies how long we wait for agent, SNMP device or external check (in seconds).
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3

Timeout=4

### Option: TrapperTimeout
# Specifies how many seconds trapper may spend processing new data.
#
# Mandatory: no
# Range: 1-300
# Default:
# TrapperTimeout=300

### Option: UnreachablePeriod
# After how many seconds of unreachability treat a host as unavailable.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnreachablePeriod=45

### Option: UnavailableDelay
# How often host is checked for availability during the unavailability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnavailableDelay=60

### Option: UnreachableDelay
# How often host is checked for availability during the unreachability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnreachableDelay=15

### Option: AlertScriptsPath
# Full path to location of custom alert scripts.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# AlertScriptsPath=${datadir}/zabbix/alertscripts

AlertScriptsPath=/usr/lib/zabbix/alertscripts

### Option: ExternalScripts
# Full path to location of external scripts.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# ExternalScripts=${datadir}/zabbix/externalscripts

ExternalScripts=/usr/lib/zabbix/externalscripts

### Option: FpingLocation
# Location of fping.
# Make sure that fping binary has root ownership and SUID flag set.
#
# Mandatory: no
# Default:
# FpingLocation=/usr/sbin/fping

FpingLocation=/usr/bin/fping

### Option: Fping6Location
# Location of fping6.
# Make sure that fping6 binary has root ownership and SUID flag set.
# Make empty if your fping utility is capable to process IPv6 addresses.
#
# Mandatory: no
# Default:
# Fping6Location=/usr/sbin/fping6

Fping6Location=/usr/bin/fping6

### Option: SSHKeyLocation
# Location of public and private keys for SSH checks and actions.
#
# Mandatory: no
# Default:
# SSHKeyLocation=

### Option: LogSlowQueries
# How long a database query may take before being logged (in milliseconds).
# Only works if DebugLevel set to 3, 4 or 5.
# 0 - don't log slow queries.
#
# Mandatory: no
# Range: 1-3600000
# Default:
# LogSlowQueries=0

LogSlowQueries=3000

### Option: TmpDir
# Temporary directory.
#
# Mandatory: no
# Default:
# TmpDir=/tmp

### Option: StartProxyPollers
# Number of pre-forked instances of pollers for passive proxies.
#
# Mandatory: no
# Range: 0-250
# Default:
# StartProxyPollers=1

### Option: ProxyConfigFrequency
# How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
# This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600*24*7
# Default:
# ProxyConfigFrequency=3600

### Option: ProxyDataFrequency
# How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
# This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600
# Default:
# ProxyDataFrequency=1

### Option: AllowRoot
# Allow the server to run as 'root'. If disabled and the server is started by 'root', the server
# will try to switch to the user specified by the User configuration option instead.
# Has no effect if started under a regular user.
# 0 - do not allow
# 1 - allow
#
# Mandatory: no
# Default:
# AllowRoot=0

### Option: User
# Drop privileges to a specific, existing user on the system.
# Only has effect if run as 'root' and AllowRoot is disabled.
#
# Mandatory: no
# Default:
# User=zabbix

### Option: Include
# You may include individual files or all files in a directory in the configuration file.
# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
# Include=

# Include=/usr/local/etc/zabbix_server.general.conf
# Include=/usr/local/etc/zabbix_server.conf.d/
# Include=/usr/local/etc/zabbix_server.conf.d/*.conf

### Option: SSLCertLocation
# Location of SSL client certificates.
# This parameter is used only in web monitoring.
#
# Mandatory: no
# Default:
# SSLCertLocation=${datadir}/zabbix/ssl/certs

### Option: SSLKeyLocation
# Location of private keys for SSL client certificates.
# This parameter is used only in web monitoring.
#
# Mandatory: no
# Default:
# SSLKeyLocation=${datadir}/zabbix/ssl/keys

### Option: SSLCALocation
# Override the location of certificate authority (CA) files for SSL server certificate verification.
# If not set, system-wide directory will be used.
# This parameter is used only in web monitoring and SMTP authentication.
#
# Mandatory: no
# Default:
# SSLCALocation=

####### LOADABLE MODULES #######

### Option: LoadModulePath
# Full path to location of server modules.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# LoadModulePath=${libdir}/modules

### Option: LoadModule
# Module to load at server startup. Modules are used to extend functionality of the server.
# Format: LoadModule=<module.so>
# The modules must be located in directory specified by LoadModulePath.
# It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
# LoadModule=

####### TLS-RELATED PARAMETERS #######

### Option: TLSCAFile
# Full pathname of a file containing the top-level CA(s) certificates for
# peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=

### Option: TLSCRLFile
# Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=

### Option: TLSCertFile
# Full pathname of a file containing the server certificate or certificate chain.
#
# Mandatory: no
# Default:
# TLSCertFile=

### Option: TLSKeyFile
# Full pathname of a file containing the server private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=


Respecto al contenido del archivo me surge una duda, que es el signo numeral, (no soy programador), el numeral lo tengo que tomar como que la linea esta comentada??, siempre tuve la duda desde que ingrese por primera vez al archivo de configuración, pero asumí que no, pero en la imagen del post de Hernandes Martins vi que justo el tamaño de CacheSize no tiene el numeral, y me revivió esa duda. debo sacar el numeral?
Reply With Quote
  #7  
Old 19-01-2017, 16:45
Hernandes Martins Hernandes Martins is offline
Senior Member
Zabbix certified specialist
 
Join Date: Apr 2011
Location: São Paulo - Brasil
Posts: 550
Send a message via Skype™ to Hernandes Martins
Talking

Hola amigo,

Mira algo importante :

No és recomiendo usar el zabbix appliance, pues el es solo para teste y no queda bien en producion con muchos equipos.

la configuracion es:

Antes
# ValueCacheSize=8M

Despues

ValueCacheSize=16M o 32M


saludos
__________________
__

Att.
Hernandes Martins

http://www.unirede.net - Zabbix Brazil Premium Partner
Blog: http://hernandesmartins.blogspot.com.br/
Skype: hernandss | Youtube: HernandesMartins
São Paulo - SP - Brazil Comunnity: http://zabbixbrasil.org/
Grupo Facebook
Zabbix LATAM Español https://www.facebook.com/groups/zabbixlatam/
Zabbix Brasil Portugues https://www.facebook.com/groups/zabbixbrasil/
Reply With Quote
  #8  
Old 19-01-2017, 16:49
Hernandes Martins Hernandes Martins is offline
Senior Member
Zabbix certified specialist
 
Join Date: Apr 2011
Location: São Paulo - Brasil
Posts: 550
Send a message via Skype™ to Hernandes Martins
Talking

Hola amigo

Recomiendo editor "vim"

Para editar el contenido del archivo necesita buscar videos a cerca del editor vim em LINUX.

Saludos
__________________
__

Att.
Hernandes Martins

http://www.unirede.net - Zabbix Brazil Premium Partner
Blog: http://hernandesmartins.blogspot.com.br/
Skype: hernandss | Youtube: HernandesMartins
São Paulo - SP - Brazil Comunnity: http://zabbixbrasil.org/
Grupo Facebook
Zabbix LATAM Español https://www.facebook.com/groups/zabbixlatam/
Zabbix Brasil Portugues https://www.facebook.com/groups/zabbixbrasil/
Reply With Quote
  #9  
Old 19-01-2017, 21:26
sancho sancho is offline
Senior Member
 
Join Date: Mar 2015
Location: Madrid, Spain
Posts: 112
Default

Quote:
Respecto al contenido del archivo me surge una duda, que es el signo numeral, (no soy programador), el numeral lo tengo que tomar como que la linea esta comentada??, siempre tuve la duda desde que ingrese por primera vez al archivo de configuración, pero asumí que no, pero en la imagen del post de Hernandes Martins vi que justo el tamaño de CacheSize no tiene el numeral, y me revivió esa duda. debo sacar el numeral?
Hola fernando,
Efectivamente el numeral (#) quiere decir que la línea está comentada, pero que el valor que pone es el que está por defecto, por ejemplo:
# ValueCacheSize=8M
Esa línea está comentada, por lo tanto el servidor no utiliza ese valor, pero al venir ya comentada desde la instalación, el valor 8M que muestra esa línea es el que por defecto utiliza el server si no le indicas un valor diferentes en otra línea sin comentar.

No se si me he explicado bien o te he liado más
Reply With Quote
  #10  
Old 19-01-2017, 21:36
fvidal fvidal is offline
Junior Member
 
Join Date: Jan 2017
Posts: 11
Post

Hola SANCHO y Hernandes.

le saque el Numeral, y perfecto!!!!!, inicio y ya van como tres horas y no se cae.... así que una cosa solucionada.
les agradezco muy mucho por toda la ayuda, ahora a seguir buscando la forma que me sirva, necesito que de alguna manera me haga un monitoreo contante.
tengo 4 Tv 42" para el monitoreo donde hoy en dia tengo separado en 4 vistas diferentes recursos, disco, memoria, CPU, ping alive y http alive y demás, que me ayudan a ver constantemente, de alguna forma online, los que va pasando, con un solo vistazo en esas pantallas, si algo esta rojo!!!!! a correr. mas allá de la alerta por mail donde detalla algo mas de la falla. pero con ese solo vistazo ya se que por ejemplo un ping fallo, un servicio http se callo, que un recurso, memoria, disco, CPU esta alto, ya que según rango va cambiando de color, los típicos verdes, amarillo, rojo!. necesito ver de general algo así..

GRACIAS!!!! POR TODO!!!!!! y si se saben de como acercarme a eso, bienvenido sera!!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 03:30.