Monitoring Intel/LSI/Symbios RAID controllers

[neo4is]

It's not passive agent, I've used trapper items there. See my previous message.[/QUOTE]

You meand that you use raid_trapper_check.ps1 with same parameter in agent config?

[ArtemK]

I'm using raid_trapper_check.ps1 in scheduled task, but zabbix server also checks adapter items using zabbix agent active check, and key is defined as userparameter in agent config, if that is what you meant.

[neo4is]

I'm using raid_trapper_check.ps1 in scheduled task, but zabbix server also checks adapter items using zabbix agent active check, and key is defined as userparameter in agent config, if that is what you meant.

Yes, that is what I need. Thanks for your sharing.

[timon_is_timon]

can you write step by step instruction? when I run script raid_check.ps1 it ask me about paprameters... I take them, but...

PS C:\fs\zagent> .\raid_check.ps1

Командлет raid_check.ps1 в конвейере команд в позиции 1
Укажите значения для следующих параметров:
mode: pdisk
adapter: 0
Select-String : Не удается привязать аргумент к параметру "Pattern", так как он представляет собой пустую строку.
C:\fs\zagent\raid_check.ps1:57 знак:93
+ $output = (& $CLI -pdinfo -PhysDrv["$enclosure_id":"$disk_id"] -a $adapter | Select-String <<<< $regex -AllM
atches | % { $_.Matches } | % { $_.groups[1].value })
+ CategoryInfo : InvalidData: ( [Select-String], ParameterBindingValidationException
+ FullyQualifiedErrorId : ParameterArgumentValidationErrorEmptyStringNotAllo wed,Microsoft.PowerShell.Commands.Sele
ctStringCommand

[timon_is_timon]

PS C:\fs\zagent> .\raid_trapper_check.ps1
info from server: "processed: 0; failed: 40; total: 40; seconds spent: 0.000707"
sent: 40; skipped: 0; total: 40

[timon_is_timon]

PS C:\fs\zagent> .\raid_discovery.ps1
info from server: "processed: 0; failed: 3; total: 3; seconds spent: 0.000077"
sent: 3; skipped: 0; total: 3

[ArtemK]

Looks like your server doesn't recognize data from your agent, do you have active agent configured on host?

1. check, that you linked template to right host in zabbix
2. check, that discovery trapper items have blank 'Allowed hosts' or correct ip of host
3. check, that active agent is working on host (zabbix trapper uses it's config). Or, you can modify zabbix_sender command in script to manually define zabbix server and agent host name.

[timon_is_timon]

Looks like your server doesn't recognize data from your agent, do you have active agent configured on host?

1. check, that you linked template to right host in zabbix
2. check, that discovery trapper items have blank 'Allowed hosts' or correct ip of host
3. check, that active agent is working on host (zabbix trapper uses it's config). Or, you can modify zabbix_sender command in script to manually define zabbix server and agent host name.

1. yes, it linked
2. it's blank
3. Active agent is working i'm take logs from this host succesfully

Fragment of agent's log
292:20131220:184624.813 Starting Zabbix Agent [NS-hyper-V]. Zabbix 2.2.0 (revision 40147).
3292:20131220:184624.813 using configuration file: C:\zabbix_agentd.conf
1176:20131220:184624.829 agent #0 started [collector]
2748:20131220:184624.829 agent #1 started[listener #1]
2996:20131220:184624.829 agent #2 started[listener #2]
1328:20131220:184624.829 agent #3 started[listener #3]
4004:20131220:184624.829 agent #4 started [active checks #1]

[ArtemK]

Do you have any zabbix active agent types checks on this host, that successfully works? Looks like template is linked to wrong host, or active agent doesn't work (hostname mismatch in server and agent, server address in agent configuration?)

[timon_is_timon]

Do you have any zabbix active agent types checks on this host, that successfully works? Looks like template is linked to wrong host, or active agent doesn't work (hostname mismatch in server and agent, server address in agent configuration?)

Yes i do. There iventlog[] propertly work on that server (sorry for my bad english)

[timon_is_timon]

discovery end cheks is worked. But values is not readble

For example:
C:\fs\zagent\intel_raid_check.ps1 : ?? 㤠???? ?஢???? ??㬥?? ??? ??ࠬ???
"enclosure_id". ??㬥?? 2989 ????? ?????⨬??? ????????? ???ᨬ????? ???祭
?? 1024. ?????? ??㬥??, ???祭?? ???ண? ????? 1024, ??᫥ 祣? ??????
?믮?????? ???????.
??ப?:0 ????:1
+ <<<<
+ CategoryInfo : InvalidData: ( [intel_raid_check.ps1], ParentC
ontainsErrorRecordException
+ FullyQualifiedErrorId : ParameterArgumentValidationError,intel_raid_chec
k.ps1


How i can repair that?

[denser]

Why shedule script via windows? We can doit via agent... Just add Text Data Item

UserParameter=hw.raid.discover,powershell.exe -File "C:\FS\Zagent\raid\raid_discovery.ps1"

And run it as often as need No sheduler.

Also you can add trigger to ALARM on not contained test "failed: 0"

[ArtemK]

Why shedule script via windows? We can doit via agent... Just add Text Data Item

Because quite often I got script running more than 30 seconds and discovery item in not supported state because of this

And I didn't understood your note about trigger and alarm

[denser]

I mean if Discovery returns string without falure:0 (ie falure: 1) - i can alarm about it. It means something goes wron on discovery stage.

            <items>
                <item>
                    <name>Discovery initiate</name>
                    <type>7</type>
                    <snmp_community/>
                    <multiplier>0</multiplier>
                    <snmp_oid/>
                    <key>hw.raid.discover</key>
                    <delay>86400</delay>
                    <history>360</history>
                    <trends>365</trends>
                    <status>0</status>
                    <value_type>4</value_type>
                    <allowed_hosts/>
                    <units/>
                    <delta>0</delta>
                    <snmpv3_contextname/>
                    <snmpv3_securityname/>
                    <snmpv3_securitylevel>0</snmpv3_securitylevel>
                    <snmpv3_authprotocol>0</snmpv3_authprotocol>
                    <snmpv3_authpassphrase/>
                    <snmpv3_privprotocol>0</snmpv3_privprotocol>
                    <snmpv3_privpassphrase/>
                    <formula>1</formula>
                    <delay_flex/>
                    <params/>
                    <ipmi_sensor/>
                    <data_type>0</data_type>
                    <authtype>0</authtype>
                    <username/>
                    <password/>
                    <publickey/>
                    <privatekey/>
                    <port/>
                    <description/>
                    <inventory_link>0</inventory_link>
                    <applications>
                        <application>
                            <name>RAID discover</name>
                        </application>
                    </applications>
                    <valuemap/>
                    <logtimefmt/>
                </item>
            </items>

I start using your template and tune discovery every day via Item. So 3 days goes good. Zabbix 2.2.6

[ArtemK]

Still unclear. Discovery should return JSON, what string you are talking about? BTW, there are should be updated scripts on github