Zabbix on Fedora

[cprajescu]

Hello,

I am a Linux newbie and I want to install Zabbix on my Fedora 13 machine.. Where can I find a manual on how to install Zabbix on Fedora.

Thanks,

Claudio P.

[nelsonab]

http://www.zabbix.com/documentation/1.8/manual/installation (http://www.zabbix.com/forum/../documentation/1.8/manual/installation)

That's a good place to start

[cprajescu]

Hey,

I followed that manual and there are a few problems:

1. After I run the following command, cat mysql.sql | mysql -u root -p **** zabbix, I go into the zabbix database to see if there are any channges and there are none:

mysql> use zabbix
Database changed
mysql> show tables;
Empty set (0.00 sec)



This is the output that I get after running the above command:

[root@NMonitor schema]# cat mysql.sql | mysql -u root -p **** zabbix
mysql Ver 14.14 Distrib 5.1.47, for redhat-linux-gnu (i386) using readline 5.1
Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
This software comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to modify and redistribute it under the GPL v2 license
Usage: mysql [OPTIONS] [database]
-?, --help Display this help and exit.
-I, --help Synonym for -?
--auto-rehash Enable automatic rehashing. One doesn't need to use
'rehash' to get table and field completion, but startup
and reconnecting may take a longer time. Disable with
--disable-auto-rehash.
-A, --no-auto-rehash
No automatic rehashing. One has to use 'rehash' to get
table and field completion. This gives a quicker start of
mysql and disables rehashing on reconnect.
-B, --batch Don't use history file. Disable interactive behavior.
(Enables --silent.)
--character-sets-dir=name
Directory for character set files.
--column-type-info Display column type information.
-c, --comments Preserve comments. Send comments to the server. The
default is --skip-comments (discard comments), enable
with --comments.
-C, --compress Use compression in server/client protocol.
-#, --debug[=#] This is a non-debug version. Catch this and exit.
--debug-check Check memory and open file usage at exit.
-T, --debug-info Print some debug info at exit.
-D, --database=name Database to use.
--default-character-set=name
Set the default character set.
--delimiter=name Delimiter to be used.
-e, --execute=name Execute command and quit. (Disables --force and history
file.)
-E, --vertical Print the output of a query (rows) vertically.
-f, --force Continue even if we get an SQL error.
-G, --named-commands
Enable named commands. Named commands mean this program's
internal commands; see mysql> help . When enabled, the
named commands can be used from any line of the query,
otherwise only from the first line, before an enter.
Disable with --disable-named-commands. This option is
disabled by default.
-g, --no-named-commands
Named commands are disabled. Use \* form only, or use
named commands only in the beginning of a line ending
with a semicolon (;). Since version 10.9, the client now
starts with this option ENABLED by default. Disable with
'-G'. Long format commands still work from the first
line. WARNING: option deprecated; use
--disable-named-commands instead.
-i, --ignore-spaces Ignore space after function names.
--local-infile Enable/disable LOAD DATA LOCAL INFILE.
-b, --no-beep Turn off beep on error.
-h, --host=name Connect to host.
-H, --html Produce HTML output.
-X, --xml Produce XML output.
--line-numbers Write line numbers for errors.
-L, --skip-line-numbers
Don't write line number for errors.
-n, --unbuffered Flush buffer after each query.
--column-names Write column names in results.
-N, --skip-column-names
Don't write column names in results.
-O, --set-variable=name
Change the value of a variable. Please note that this
option is deprecated; you can set variables directly with
--variable-name=value.
--sigint-ignore Ignore SIGINT (CTRL-C).
-o, --one-database Only update the default database. This is useful for
skipping updates to other database in the update log.
--pager[=name] Pager to use to display results. If you don't supply an
option, the default pager is taken from your ENV variable
PAGER. Valid pagers are less, more, cat [> filename],
etc. See interactive help (\h) also. This option does not
work in batch mode. Disable with --disable-pager. This
option is disabled by default.
--no-pager Disable pager and print to stdout. See interactive help
(\h) also. WARNING: option deprecated; use
--disable-pager instead.
-p, --password[=name]
Password to use when connecting to server. If password is
not given it's asked from the tty.
-P, --port=# Port number to use for connection or 0 for default to, in
order of preference, my.cnf, $MYSQL_TCP_PORT,
/etc/services, built-in default (3306).
--prompt=name Set the mysql prompt to this value.
--protocol=name The protocol to use for connection (tcp, socket, pipe,
memory).
-q, --quick Don't cache result, print it row by row. This may slow
down the server if the output is suspended. Doesn't use
history file.
-r, --raw Write fields without conversion. Used with --batch.
--reconnect Reconnect if the connection is lost. Disable with
--disable-reconnect. This option is enabled by default.
-s, --silent Be more silent. Print results with a tab as separator,
each row on new line.
-S, --socket=name The socket file to use for connection.
--ssl Enable SSL for connection (automatically enabled with
other flags). Disable with --skip-ssl.
--ssl-ca=name CA file in PEM format (check OpenSSL docs, implies
--ssl).
--ssl-capath=name CA directory (check OpenSSL docs, implies --ssl).
--ssl-cert=name X509 cert in PEM format (implies --ssl).
--ssl-cipher=name SSL cipher to use (implies --ssl).
--ssl-key=name X509 key in PEM format (implies --ssl).
--ssl-verify-server-cert
Verify server's "Common Name" in its cert against
hostname used when connecting. This option is disabled by
default.
-t, --table Output in table format.
--tee=name Append everything into outfile. See interactive help (\h)
also. Does not work in batch mode. Disable with
--disable-tee. This option is disabled by default.
--no-tee Disable outfile. See interactive help (\h) also. WARNING:
Option deprecated; use --disable-tee instead.
-u, --user=name User for login if not current user.
-U, --safe-updates Only allow UPDATE and DELETE that uses keys.
-U, --i-am-a-dummy Synonym for option --safe-updates, -U.
-v, --verbose Write more. (-v -v -v gives the table output format).
-V, --version Output version information and exit.
-w, --wait Wait and retry if connection is down.
--connect_timeout=# Number of seconds before connection timeout.
--max_allowed_packet=#
The maximum packet length to send to or receive from
server.
--net_buffer_length=#
The buffer size for TCP/IP and socket communication.
--select_limit=# Automatic limit for SELECT when using --safe-updates.
--max_join_size=# Automatic limit for rows in a join when using
--safe-updates.
--secure-auth Refuse client connecting to server if it uses old
(pre-4.1.1) protocol.
--server-arg=name Send embedded server this as a parameter.
--show-warnings Show warnings after every statement.

Default options are read from the following files in the given order:
/etc/mysql/my.cnf /etc/my.cnf ~/.my.cnf
The following groups are read: mysql client
The following options may be given as the first argument:
--print-defaults Print the program argument list and exit.
--no-defaults Don't read default options from any option file.
--defaults-file=# Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.

Variables (--variable-name=value)
and boolean options {FALSE|TRUE} Value (after reading options)
--------------------------------- -----------------------------
auto-rehash TRUE
character-sets-dir (No default value)
column-type-info FALSE
comments FALSE
compress FALSE
debug-check FALSE
debug-info FALSE
database (No default value)
default-character-set latin1
delimiter ;
vertical FALSE
force FALSE
named-commands FALSE
ignore-spaces FALSE
local-infile FALSE
no-beep FALSE
host (No default value)
html FALSE
xml FALSE
line-numbers TRUE
unbuffered FALSE
column-names TRUE
sigint-ignore FALSE
port 0
prompt mysql>
quick FALSE
raw FALSE
reconnect FALSE
socket (No default value)
ssl FALSE
ssl-ca (No default value)
ssl-capath (No default value)
ssl-cert (No default value)
ssl-cipher (No default value)
ssl-key (No default value)
ssl-verify-server-cert FALSE
table FALSE
user root
safe-updates FALSE
i-am-a-dummy FALSE
connect_timeout 0
max_allowed_packet 16777216
net_buffer_length 16384
select_limit 1000
max_join_size 1000000
secure-auth FALSE
show-warnings FALSE




2. When I run the "make install" command, it gives me the following error.

[root@NMonitor zabbix-1.8.2]# ls
aclocal.m4 config.guess create include man upgrades
AUTHORS config.log CREDITS INSTALL misc
bin config.sub depcomp install-sh missing
build configure docs m4 NEWS
ChangeLog configure.in FAQ Makefile.am README
compile COPYING frontends Makefile.in src
[root@NMonitor zabbix-1.8.2]# make install
make: *** No rule to make target `install'. Stop.

Can someone please tell me what am I doing wrong?

Thanks,

Claudio P.

[gunca]

Try this:
cat mysql.sql | mysql -u zabbix -p -D zabbix

And make sure you are in right directory.

[cprajescu]

Thanks gunca!! That fixed my first problem. I'm still having problems with running the 'make install' command:


Here is the file in which I'm executing the command:

[root@NMonitor zabbix-1.8.2]# pwd
/home/zab_serv/zabbix/zabbix-1.8.2

Here are the files inside the above file:

[root@NMonitor zabbix-1.8.2]# ls
aclocal.m4 config.guess create include man upgrades
AUTHORS config.log CREDITS INSTALL misc
bin config.sub depcomp install-sh missing
build configure docs m4 NEWS
ChangeLog configure.in FAQ Makefile.am README
compile COPYING frontends Makefile.in src

Here is the command that I'm using:

[root@NMonitor zabbix-1.8.2]# make install
make: *** No rule to make target `install'. Stop.


Am I doing something wrong??

[gunca]

But before you executed "make install" did you run command:
"./configure --enable-server --with-mysql --with-net-snmp --with-jabber --with-libcurl"

(This comand is only example for mysql db.)

[cprajescu]

Yes, I did execute that command, and it worked fine.

[Bennie]

could you post the output from the ./configure command? Could be it run but that you are missing libraries that makes it run completely.