Counter64

[orla]

Hi

Sorry to ask abount this, but I am stuck.
I try to read Cisco PIX via Zabbix.

snmpwalk 192.168.1.15 -c xxxxx -v 2c 1.3.6.1.4.1.9.9.467.1.2.1.3
SNMPv2-SMI::enterprises.9.9.467.1.2.1.3.0 = Counter64: 0
(this is bytes into the cryptocard)

In Zabbix I get an error:
OID [.1.3.6.1.4.1.9.9.467.1.2.1.3] value #2 has unknow type [81]
(trying to read via SNMPv2)

I found some hints in the forum, that point to the Counter64, but as I read it, they should be solved in newer releases (I run 1.4.2)

Trying to read with SNMPv3, does give another Zabbix error (SNMP error [1] ) and a PIX log:
Dropping SNMP request from 192.168.1.39/11136 to inside:192.168.1.15/snmp because: SNMPv3 not supported

Hope anyone has an idear, what I have missed.

Regards Orla

[orla]

Well - no one using zabbix with counter64?

[welkin]

I got the same Problem with

2561:20071009:101324 OID [1.3.6.1.4.1.12356.1.10] value #2 has unknow type [81]

snmpwalk -v2c -c public 192.168.1.1 1.3.6.1.4.1.12356.1.10

SNMPv2-SMI::enterprises.12356.1.10.0 = Gauge32: 14

I'm using Zabbix 1.4.2

[jonnjonzzn]

Same thing here...

[markpr]

Same error and problem with Counter32 here as well....

[Alexei]

Hey, am I the only one who thinks that 1.3.6.1.4.1.12356.1.10 and 1.3.6.1.4.1.12356.1.10.0 are different OIDs?

[welkin]

Thanks for pointing out my blindness

mfg
welkin