Snmp index in item

[Fabien]

Hello,
I am trying to graph CPU utilization in this case I have 2 CPUs

The documentation is giving the following example
ifInOctets["index","ifDescr","GigabitEthernet0/1"]

I tried the following syntax :
.1.3.6.1.4.1.22610.2.4.1.3.2.1.3["index",".1.3.6.1.4.1.22610.2.4.1.3.2.1.1"]
It didn't work.

Any idea how to do it ?

$ snmpwalk -c public -v2c 192.168.59.107 .1.3.6.1.4.1.22610.2.4.1.3.2
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.2.0 = STRING: "5"
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.2.1 = STRING: "4"
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.3.0 = INTEGER: 5
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.3.1 = INTEGER: 4
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.4.0 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.4.1 = INTEGER: 0

[pc99096]

this is how i am doing it, it might not be the most elegant solution, but it works for me

snmpwalk -c public -v2c 192.168.59.107 -> get the list of possible items
snmpwalk -c public -v2c 192.168.59.107 -On -> same, but with OID instead of name

compare those 2 lists to get the name-OID relation
find your item you want to monitor, find the OID for it

create a new item in zabbix:
name - anything
type - snmp agent
key - anything
snmp OID - your OID from snmpwalk
the rest should be clear

[Fabien]

snmp index

Hello
Thank you for your answer.
I am probably missing something, I would like to create at the end a graph for each cpu automatically.
In my example I have 2 cpus but some equipments have 24 cpus.
I cannot create an item for each cpu.index.
In my case for the snmp oid I have :
.1.3.6.1.4.1.22610.2.4.1.3.2.1.3.index
index is from 0 to 24.

How can I achieve it ?
How can I have on the same graph all my cpu curves ?

Best regards

Fabien

[pc99096]

i am afraid you will have to do it for each cpu
then you can create one single graph with all 2-24 items

[steveboyson]

I wrote a custom LLD for this type of SNMP queries which have two changing indexes.

usage:

./LLD_SNMP host=myhost.domain key=CPQIDA-MIB::cpqDaPhyDrvLocationString addindex

The "addindex" parameter is optional, also "debug" is optional to show debug output

https://www.netzwerk-aktiv.com/owncloud/public.php?service=files&t=f8ac8ddb431aa0730c74fdfb6473c251

Output: pls. see "LLD_SNMP_testoutput.txt"

In your example, you would specify

key=SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1

and omit "addindex"

Then, you create your prototype items which following SNMP OID:
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.{#INDEX}.{#SUBI NDEX}
as these are the entries generated by the LLD script.