version Zabbix 2.0.5
I have been monitoring ip sla on a large group of cisco routers with zabbix to monitor basic connectivity multiple isp.
I am now trying to monitor voip lines in a similar manner. I am haveing no trouble with the basic cconnectivity but would also like to monitor the mos score. the oid for this is: 1.3.6.1.4.1.9.9.42.1.3.5.1.57.10 with (10) being the index number.
working example:
Name sla voip 1
Type SNMPv2 agent
key t1_up
SNMP OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.10
SNMP community public
using snmp walk:
snmpwalk -v 2c -c public 10.100.31.1 iso.3.6.1.4.1.9.9.42.1.2.10.1.1 this returns:
iso.3.6.1.4.1.9.9.42.1.2.10.1.1.10 = Gauge32: 8
not working:
Name sla voip condition
Type SNMPv2 agent
key t1_condition
SNMP OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.10
SNMP community public
using snmp walk:
snmpwalk -v 2c -c public 10.100.31.1 iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10 this returns:
iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10.440771241 = Gauge32: 434
iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10.441133647 = Gauge32: 434
first I am getting two results??
second it is tacking on '440771241' futher problems are resulting as the '440771241' will change to another number that is even higher number. this means that i cannot
I a have been reading lots of post on using dynamic snmp but have not been able to get this working.
the key seem to be getting one result, but when I do the following 'snmpwalk -v 2c -c public 10.100.31.1 iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10.440771241' I get the result needed but it only works until the '440771241' changes.
I am really only interested in the number 434 in this case.
I have been monitoring ip sla on a large group of cisco routers with zabbix to monitor basic connectivity multiple isp.
I am now trying to monitor voip lines in a similar manner. I am haveing no trouble with the basic cconnectivity but would also like to monitor the mos score. the oid for this is: 1.3.6.1.4.1.9.9.42.1.3.5.1.57.10 with (10) being the index number.
working example:
Name sla voip 1
Type SNMPv2 agent
key t1_up
SNMP OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.10
SNMP community public
using snmp walk:
snmpwalk -v 2c -c public 10.100.31.1 iso.3.6.1.4.1.9.9.42.1.2.10.1.1 this returns:
iso.3.6.1.4.1.9.9.42.1.2.10.1.1.10 = Gauge32: 8
not working:
Name sla voip condition
Type SNMPv2 agent
key t1_condition
SNMP OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.10
SNMP community public
using snmp walk:
snmpwalk -v 2c -c public 10.100.31.1 iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10 this returns:
iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10.440771241 = Gauge32: 434
iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10.441133647 = Gauge32: 434
first I am getting two results??
second it is tacking on '440771241' futher problems are resulting as the '440771241' will change to another number that is even higher number. this means that i cannot
I a have been reading lots of post on using dynamic snmp but have not been able to get this working.
the key seem to be getting one result, but when I do the following 'snmpwalk -v 2c -c public 10.100.31.1 iso.3.6.1.4.1.9.9.42.1.3.5.1.57.10.440771241' I get the result needed but it only works until the '440771241' changes.
I am really only interested in the number 434 in this case.