Hi all
Its been a good number of years since i last looked at zabbix. I have a requirement to monitor our internet connectivity but not sure if this can be done with this or not so your input would be appreciated.
setup
2 DC's with internet connections. its a single ISP and our ip range has been broken down into for subnets. 1 range permanent at DC1 and 1 and DC2. The last 2 ranges can move between the DC's and it controlled by both us and the isp using tracking. (We are changing this has its having issues but not a quick fix) . ISP will move the routes to DC2 is it losses tracking to DC1 and we do the same internally to route traffic out DC2 FW.
at both sites we have 2 firewalls
internet----------- FW1-------------LAN
| . |
| . |
--------FW2
So FW1 is the main firewall and as the 2 "floating" ranges . FW2 has the fixed range and this is duplicated the DC2
What we would like to do is monitor that we have internet access through both FW's at both sites. one for the FW1's will show as down due to the routing. It would be nice to have this in a graphical view we can put on a wall board and to show the stat of the tracking and possible monitor of selected routes so we can see if its moved.
I hope this explains enough but if not let me know. Is this something that could be done?
Thanks
Lee
Its been a good number of years since i last looked at zabbix. I have a requirement to monitor our internet connectivity but not sure if this can be done with this or not so your input would be appreciated.
setup
2 DC's with internet connections. its a single ISP and our ip range has been broken down into for subnets. 1 range permanent at DC1 and 1 and DC2. The last 2 ranges can move between the DC's and it controlled by both us and the isp using tracking. (We are changing this has its having issues but not a quick fix) . ISP will move the routes to DC2 is it losses tracking to DC1 and we do the same internally to route traffic out DC2 FW.
at both sites we have 2 firewalls
internet----------- FW1-------------LAN
| . |
| . |
--------FW2
So FW1 is the main firewall and as the 2 "floating" ranges . FW2 has the fixed range and this is duplicated the DC2
What we would like to do is monitor that we have internet access through both FW's at both sites. one for the FW1's will show as down due to the routing. It would be nice to have this in a graphical view we can put on a wall board and to show the stat of the tracking and possible monitor of selected routes so we can see if its moved.
I hope this explains enough but if not let me know. Is this something that could be done?
Thanks
Lee