Good day fellows, i make some mon Voltage lines (see screens) , i'ts a data prototype, look pretty work great, but! I want create some trigger with mon anomaly detected for this data prototype like this
avg(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}],1h)
<>
avg(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}],5d)
and for recovery rule
last(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}])
=
avg(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}],5d)
It's work, but trigger not close himself!
Can anyone suggest what I'm doing wrong? Why doesn't the event close expression fire correctly?
For comrades, guys, I can’t understand if I created the trigger to search for anomalies in power lines correctly - the task is simple to monitor critical deviations from the norms of power supply lines - so I decided to monitor using the formula with avg. But apparently I lack the ingenuity to think out the correct search for the anomaly, the event constantly pops up even with minor changes, and I need data starting from 10-15% deviations and the corresponding triggers with recovery, please help to defeat the dragon
Or maybe from the very beginning I did not correctly set the search parameters for the anomaly of the deviation from the norm of the power lines?
(I know that you can pull each variable into a separate item and set your own thresholds for each trigger, for each item, but I would like to learn how to properly model triggers for item prototypes.)
Для товарищей, ребят не могу понять, правильно ли создал триггер на поиск аномалий линий питания - задача простая мониторить критические отклонения от норм линий питания БП - поэтому решил мониторить с помощью формулы с avg. Но видимо мне нехватает смекалки додумать правильный поиск аномалии, событие постоянно вылазит даже при незначительных изменениях, а мне нужны данные начиная от 10-15% отклонений и соответствующие тригерры с восстановлениями, помогите победить дракона пожалуйста
(Я знаю, что можно вытащить каждую переменную в отдельный элемент данных и задать свои пороговые значения каждому триггеру, для каждого элемента данных, но я хотел бы научится правильно моделировать триггеры для прототипов элементов данных.)
avg(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}],1h)
<>
avg(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}],5d)
and for recovery rule
last(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}])
=
avg(/UKS25 Supermicro Superdoctor 5 SNMP/supermicro_powerline.[{#MONITEMNAME}],5d)
It's work, but trigger not close himself!
Can anyone suggest what I'm doing wrong? Why doesn't the event close expression fire correctly?
For comrades, guys, I can’t understand if I created the trigger to search for anomalies in power lines correctly - the task is simple to monitor critical deviations from the norms of power supply lines - so I decided to monitor using the formula with avg. But apparently I lack the ingenuity to think out the correct search for the anomaly, the event constantly pops up even with minor changes, and I need data starting from 10-15% deviations and the corresponding triggers with recovery, please help to defeat the dragon
Or maybe from the very beginning I did not correctly set the search parameters for the anomaly of the deviation from the norm of the power lines?
(I know that you can pull each variable into a separate item and set your own thresholds for each trigger, for each item, but I would like to learn how to properly model triggers for item prototypes.)
Для товарищей, ребят не могу понять, правильно ли создал триггер на поиск аномалий линий питания - задача простая мониторить критические отклонения от норм линий питания БП - поэтому решил мониторить с помощью формулы с avg. Но видимо мне нехватает смекалки додумать правильный поиск аномалии, событие постоянно вылазит даже при незначительных изменениях, а мне нужны данные начиная от 10-15% отклонений и соответствующие тригерры с восстановлениями, помогите победить дракона пожалуйста
(Я знаю, что можно вытащить каждую переменную в отдельный элемент данных и задать свои пороговые значения каждому триггеру, для каждого элемента данных, но я хотел бы научится правильно моделировать триггеры для прототипов элементов данных.)