Hi there.
I've installed zabbix_server (Zabbix) 3.0.10 Revision 70208 on a Debian GNU/Linux 8.9 (jessie) installed by the downloaded .deb package from official site.
It was running normally during months. By now, has enabled 186 hosts and 1188 items and NVPS of 50.71. But, recently I had to restart the daemon. After restart data begins to be collected and a SIGTERM signal is send to the proccess terminating the execution
From journalctl -xn
/var/log/zabbix/zabbix-server.log
As you can see no error printed on log. Only one error is reported by the systemctl, and is related to the PIDfile. With de debug mode level 4 no output with errors on start-up too.
So I changed the directory from /var/run/zabbix to /tmp/zabbix due to permissions problems but the message "PID file not readable (yet?) after start." continues.
Other configuration change was Restart=on-failure to Restart=no and remove RestartSec=10s from the systemd unit file to stop the infinite restarting
/etc/zabbix/zabbix-server.conf
/etc/init.d/zabbix-server
/lib/systemd/system/zabbix-server.service
Anyone knows other debugging method to discover the cause for start fails of the daemon?
I've installed zabbix_server (Zabbix) 3.0.10 Revision 70208 on a Debian GNU/Linux 8.9 (jessie) installed by the downloaded .deb package from official site.
It was running normally during months. By now, has enabled 186 hosts and 1188 items and NVPS of 50.71. But, recently I had to restart the daemon. After restart data begins to be collected and a SIGTERM signal is send to the proccess terminating the execution
Code:
[....] Starting zabbix-server (via systemctl): zabbix-server.serviceJob for zabbix-server.service failed. See 'systemctl status zabbix-server.service' and 'journalctl -xn' for details. failed!
Code:
Nov 17 09:46:09 zabbix sssd_be[672]: GSSAPI client step 1 Nov 17 09:46:09 zabbix sssd_be[672]: GSSAPI client step 1 Nov 17 09:46:09 zabbix sssd_be[672]: GSSAPI client step 2 Nov 17 09:46:09 zabbix sssd_be[672]: GSSAPI client step 1 Nov 17 09:46:09 zabbix sssd_be[672]: GSSAPI client step 1 Nov 17 09:46:09 zabbix sssd_be[672]: GSSAPI client step 1 Nov 17 09:46:09 zabbix sssd_be[672]: GSSAPI client step 2 Nov 17 09:54:07 zabbix sudo[4588]: fc : problem with defaults entries ; TTY=pts/0 ; PWD=/home/fc ; Nov 17 09:54:07 zabbix sudo[4588]: fc : TTY=pts/0 ; PWD=/home/fc ; USER=root ; COMMAND=/bin/journal Nov 17 09:54:07 zabbix sudo[4588]: pam_unix(sudo:session): session opened for user root by fc(uid=0)
Code:
4195:20171117:093515.413 Starting Zabbix Server. Zabbix 3.0.10 (revision 70208). 4195:20171117:093515.413 ****** Enabled features ****** 4195:20171117:093515.413 SNMP monitoring: YES 4195:20171117:093515.413 IPMI monitoring: YES 4195:20171117:093515.413 Web monitoring: YES 4195:20171117:093515.413 VMware monitoring: YES 4195:20171117:093515.413 SMTP authentication: YES 4195:20171117:093515.413 Jabber notifications: YES 4195:20171117:093515.413 Ez Texting notifications: YES 4195:20171117:093515.413 ODBC: YES 4195:20171117:093515.413 SSH2 support: YES 4195:20171117:093515.413 IPv6 support: YES 4195:20171117:093515.413 TLS support: YES 4195:20171117:093515.414 ****************************** 4195:20171117:093515.414 using configuration file: /etc/zabbix/zabbix_server.conf 4195:20171117:093515.417 current database version (mandatory/optional): 03000000/03000000 4195:20171117:093515.417 required mandatory version: 03000000 4195:20171117:093515.444 server #0 started [main process] 4199:20171117:093515.448 server #3 started [poller #1] 4200:20171117:093515.452 server #4 started [poller #2] 4198:20171117:093515.456 server #2 started [db watchdog #1] 4201:20171117:093515.457 server #5 started [poller #3] 4202:20171117:093515.460 server #6 started [poller #4] 4203:20171117:093515.461 server #7 started [poller #5] 4204:20171117:093515.463 server #8 started [unreachable poller #1] 4197:20171117:093515.464 server #1 started [configuration syncer #1] 4205:20171117:093515.468 server #9 started [trapper #1] 4206:20171117:093515.470 server #10 started [trapper #2] 4208:20171117:093515.484 server #12 started [trapper #4] 4209:20171117:093515.487 server #13 started [trapper #5] 4210:20171117:093515.492 server #14 started [icmp pinger #1] 4211:20171117:093515.492 server #15 started [alerter #1] 4207:20171117:093515.496 server #11 started [trapper #3] 4212:20171117:093515.500 server #16 started [housekeeper #1] 4213:20171117:093515.500 server #17 started [timer #1] 4214:20171117:093515.501 server #18 started [http poller #1] 4215:20171117:093515.508 server #19 started [discoverer #1] 4217:20171117:093515.529 server #21 started [history syncer #2] 4218:20171117:093515.530 server #22 started [history syncer #3] 4219:20171117:093515.532 server #23 started [history syncer #4] 4220:20171117:093515.536 server #24 started [escalator #1] 4221:20171117:093515.539 server #25 started [java poller #1] 4222:20171117:093515.544 server #26 started [java poller #2] 4216:20171117:093515.546 server #20 started [history syncer #1] 4223:20171117:093515.546 server #27 started [java poller #3] 4233:20171117:093515.568 server #29 started [java poller #5] 4234:20171117:093515.570 server #30 started [proxy poller #1] 4235:20171117:093515.580 server #31 started [self-monitoring #1] 4236:20171117:093515.584 server #32 started [vmware collector #1] 4232:20171117:093515.592 server #28 started [java poller #4] 4239:20171117:093515.596 server #33 started [vmware collector #2] 4201:20171117:093556.358 Zabbix agent item "system.hw.chassis[model]" on host "abbb2a0d-7994-0131-4592-d836134dd577" failed: first network error, wait for 15 seconds 4204:20171117:093602.585 enabling Zabbix agent checks on host "5026872b-c05b-0fc4-fa11-617737e5134f": host became available 4201:20171117:093611.413 Zabbix agent item "system.hw.chassis[model]" on host "f8482fda-3bfd-2e08-a31f-3ccd8b65de8a" failed: first network error, wait for 15 seconds 4204:20171117:093627.662 enabling Zabbix agent checks on host "5026514f-c904-b3c9-7801-5711f5451d18": host became available 4204:20171117:093627.716 enabling Zabbix agent checks on host "50260cb1-46ef-7fc1-a76d-fb5dc191a28b": host became available 4204:20171117:093627.722 resuming Zabbix agent checks on host "abbb2a0d-7994-0131-4592-d836134dd577": connection restored 4204:20171117:093633.740 resuming Zabbix agent checks on host "f8482fda-3bfd-2e08-a31f-3ccd8b65de8a": connection restored 4195:20171117:093645.498 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4197:20171117:093645.498 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4199:20171117:093645.500 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4200:20171117:093645.504 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4201:20171117:093645.507 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4202:20171117:093645.508 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4204:20171117:093645.511 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4205:20171117:093645.512 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4206:20171117:093645.514 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4207:20171117:093645.516 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4208:20171117:093645.517 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4209:20171117:093645.519 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4210:20171117:093645.520 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4211:20171117:093645.523 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4212:20171117:093645.524 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4213:20171117:093645.526 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4214:20171117:093645.528 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4216:20171117:093645.530 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4217:20171117:093645.532 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4218:20171117:093645.534 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4219:20171117:093645.536 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4220:20171117:093645.538 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4221:20171117:093645.540 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4222:20171117:093645.542 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4223:20171117:093645.543 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4232:20171117:093645.545 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4233:20171117:093645.547 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4234:20171117:093645.548 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4235:20171117:093645.550 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4236:20171117:093645.551 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4239:20171117:093645.553 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4198:20171117:093645.555 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4215:20171117:093645.556 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4203:20171117:093645.559 Got signal [signal:15(SIGTERM),sender_pid:1,sender_uid:0,reason:0]. Exiting ... 4195:20171117:093647.499 syncing history data... 4195:20171117:093647.499 syncing history data done 4195:20171117:093647.499 syncing trends data... 4195:20171117:093647.725 syncing trends data done 4195:20171117:093647.725 Zabbix Server stopped. Zabbix 3.0.10 (revision 70208).
So I changed the directory from /var/run/zabbix to /tmp/zabbix due to permissions problems but the message "PID file not readable (yet?) after start." continues.
Other configuration change was Restart=on-failure to Restart=no and remove RestartSec=10s from the systemd unit file to stop the infinite restarting
Code:
● zabbix-server.service - Zabbix Server Loaded: loaded (/lib/systemd/system/zabbix-server.service; enabled) Active: failed (Result: timeout) since Sex 2017-11-17 09:36:47 -03; 21min ago Process: 4191 ExecStart=/usr/sbin/zabbix_server -c $CONFFILE (code=exited, status=0/SUCCESS) Nov 17 09:35:15 zabbix systemd[1]: Starting Zabbix Server... Nov 17 09:35:15 zabbix systemd[1]: PID file /tmp/zabbix/zabbix_server.pid not readable (yet?) after start. Nov 17 09:36:45 zabbix systemd[1]: zabbix-server.service start operation timed out. Terminating. Nov 17 09:36:47 zabbix systemd[1]: Failed to start Zabbix Server. Nov 17 09:36:47 zabbix systemd[1]: Unit zabbix-server.service entered failed state.
Code:
# This is a configuration file for Zabbix server daemon
# To get more information about Zabbix, visit http://www.zabbix.com
############ GENERAL PARAMETERS #################
### Option: ListenPort
# Listen port for trapper.
#
# Mandatory: no
# Range: 1024-32767
# Default:
ListenPort=10051
### Option: SourceIP
# Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=
### Option: LogType
# Specifies where log messages are written to:
# system - syslog
# file - file specified with LogFile parameter
# console - standard output
#
# Mandatory: no
# Default:
# LogType=file
### Option: LogFile
# Log file name for LogType 'file' parameter.
#
# Mandatory: no
# Default:
# LogFile=
LogFile=/var/log/zabbix/zabbix_server.log
### Option: LogFileSize
# Maximum size of log file in MB.
# 0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1
LogFileSize=0
### Option: DebugLevel
# Specifies debug level:
# 0 - basic information about starting and stopping of Zabbix processes
# 1 - critical information
# 2 - error information
# 3 - warnings
# 4 - for debugging (produces lots of information)
# 5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
# DebugLevel=3
### Option: PidFile
# Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_server.pid
PidFile=/tmp/zabbix/zabbix_agentd.pid
### Option: DBHost
# Database host name.
# If set to localhost, socket is used for MySQL.
# If set to empty string, socket is used for PostgreSQL.
#
# Mandatory: no
# Default:
DBHost=localhost
### Option: DBName
# Database name.
# For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
#
# Mandatory: yes
# Default:
# DBName=
DBName=zabbix
### Option: DBSchema
# Schema name. Used for IBM DB2 and PostgreSQL.
#
# Mandatory: no
# Default:
# DBSchema=
### Option: DBUser
# Database user. Ignored for SQLite.
#
# Mandatory: no
# Default:
# DBUser=
DBUser=zabbix
### Option: DBPassword
# Database password. Ignored for SQLite.
# Comment this line if no password is used.
#
# Mandatory: no
# Default:
DBPassword=zabbix
### Option: DBSocket
# Path to MySQL socket.
#
# Mandatory: no
# Default:
# DBSocket=/tmp/mysql.sock
### Option: DBPort
# Database port when not using local socket. Ignored for SQLite.
#
# Mandatory: no
# Range: 1024-65535
# Default (for MySQL):
# DBPort=3306
############ ADVANCED PARAMETERS ################
### Option: StartPollers
# Number of pre-forked instances of pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
StartPollers=5
### Option: StartIPMIPollers
# Number of pre-forked instances of IPMI pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartIPMIPollers=0
### Option: StartPollersUnreachable
# Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
# At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
# are started.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPollersUnreachable=1
### Option: StartTrappers
# Number of pre-forked instances of trappers.
# Trappers accept incoming connections from Zabbix sender, active agents and active proxies.
# At least one trapper process must be running to display server availability and view queue
# in the frontend.
#
# Mandatory: no
# Range: 0-1000
# Default:
StartTrappers=5
### Option: StartPingers
# Number of pre-forked instances of ICMP pingers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPingers=1
### Option: StartDiscoverers
# Number of pre-forked instances of discoverers.
#
# Mandatory: no
# Range: 0-250
# Default:
# StartDiscoverers=1
### Option: StartHTTPPollers
# Number of pre-forked instances of HTTP pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartHTTPPollers=1
### Option: StartTimers
# Number of pre-forked instances of timers.
# Timers process time-based trigger functions and maintenance periods.
# Only the first timer process handles the maintenance periods.
#
# Mandatory: no
# Range: 1-1000
# Default:
# StartTimers=1
### Option: StartEscalators
# Number of pre-forked instances of escalators.
#
# Mandatory: no
# Range: 0-100
# Default:
# StartEscalators=1
### Option: JavaGateway
# IP address (or hostname) of Zabbix Java gateway.
# Only required if Java pollers are started.
#
# Mandatory: no
# Default:
JavaGateway=127.0.0.1
### Option: JavaGatewayPort
# Port that Zabbix Java gateway listens on.
#
# Mandatory: no
# Range: 1024-32767
# Default:
JavaGatewayPort=10052
### Option: StartJavaPollers
# Number of pre-forked instances of Java pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
StartJavaPollers=5
### Option: StartVMwareCollectors
# Number of pre-forked vmware collector instances.
#
# Mandatory: no
# Range: 0-250
# Default:
StartVMwareCollectors=2
### Option: VMwareFrequency
# How often Zabbix will connect to VMware service to obtain a new data.
#
# Mandatory: no
# Range: 10-86400
# Default:
# VMwareFrequency=60
### Option: VMwarePerfFrequency
# How often Zabbix will connect to VMware service to obtain performance data.
#
# Mandatory: no
# Range: 10-86400
# Default:
# VMwarePerfFrequency=60
### Option: VMwareCacheSize
# Size of VMware cache, in bytes.
# Shared memory size for storing VMware data.
# Only used if VMware collectors are started.
#
# Mandatory: no
# Range: 256K-2G
# Default:
# VMwareCacheSize=8M
### Option: VMwareTimeout
# Specifies how many seconds vmware collector waits for response from VMware service.
#
# Mandatory: no
# Range: 1-300
# Default:
# VMwareTimeout=10
### Option: SNMPTrapperFile
# Temporary file used for passing data from SNMP trap daemon to the server.
# Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
#
# Mandatory: no
# Default:
#SNMPTrapperFile=/tmp/zabbix_traps.tmp
### Option: StartSNMPTrapper
# If 1, SNMP trapper process is started.
#
# Mandatory: no
# Range: 0-1
# Default:
#StartSNMPTrapper=1
### Option: ListenIP
# List of comma delimited IP addresses that the trapper should listen on.
# Trapper will listen on all network interfaces if this parameter is missing.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0
#ListenIP=127.0.0.1
### Option: HousekeepingFrequency
# How often Zabbix will perform housekeeping procedure (in hours).
# Housekeeping is removing outdated information from the database.
# To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
# hours of outdated information are deleted in one housekeeping cycle, for each item.
# To lower load on server startup housekeeping is postponed for 30 minutes after server start.
# With HousekeepingFrequency=0 the housekeeper can be only executed using the runtime control option.
# In this case the period of outdated information deleted in one housekeeping cycle is 4 times the
# period since the last housekeeping cycle, but not less than 4 hours and not greater than 4 days.
#
# Mandatory: no
# Range: 0-24
# Default:
# HousekeepingFrequency=1
### Option: MaxHousekeeperDelete
# The table "housekeeper" contains "tasks" for housekeeping procedure in the format:
# [housekeeperid], [tablename], [field], [value].
# No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])
# will be deleted per one task in one housekeeping cycle.
# SQLite3 does not use this parameter, deletes all corresponding rows without a limit.
# If set to 0 then no limit is used at all. In this case you must know what you are doing!
#
# Mandatory: no
# Range: 0-1000000
# Default:
# MaxHousekeeperDelete=5000
### Option: SenderFrequency
# How often Zabbix will try to send unsent alerts (in seconds).
#
# Mandatory: no
# Range: 5-3600
# Default:
# SenderFrequency=30
### Option: CacheSize
# Size of configuration cache, in bytes.
# Shared memory size for storing host, item and trigger data.
#
# Mandatory: no
# Range: 128K-8G
# Default:
CacheSize=32M
### Option: CacheUpdateFrequency
# How often Zabbix will perform update of configuration cache, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# CacheUpdateFrequency=60
### Option: StartDBSyncers
# Number of pre-forked instances of DB Syncers.
#
# Mandatory: no
# Range: 1-100
# Default:
# StartDBSyncers=4
### Option: HistoryCacheSize
# Size of history cache, in bytes.
# Shared memory size for storing history data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# HistoryCacheSize=16M
### Option: HistoryIndexCacheSize
# Size of history index cache, in bytes.
# Shared memory size for indexing history cache.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# HistoryIndexCacheSize=4M
### Option: TrendCacheSize
# Size of trend cache, in bytes.
# Shared memory size for storing trends data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# TrendCacheSize=4M
### Option: ValueCacheSize
# Size of history value cache, in bytes.
# Shared memory size for caching item history data requests.
# Setting to 0 disables value cache.
#
# Mandatory: no
# Range: 0,128K-64G
# Default:
# ValueCacheSize=8M
### Option: Timeout
# Specifies how long we wait for agent, SNMP device or external check (in seconds).
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3
Timeout=30
### Option: TrapperTimeout
# Specifies how many seconds trapper may spend processing new data.
#
# Mandatory: no
# Range: 1-300
# Default:
#TrapperTimeout=300
### Option: UnreachablePeriod
# After how many seconds of unreachability treat a host as unavailable.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnreachablePeriod=45
### Option: UnavailableDelay
# How often host is checked for availability during the unavailability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnavailableDelay=60
### Option: UnreachableDelay
# How often host is checked for availability during the unreachability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnreachableDelay=15
### Option: AlertScriptsPath
# Full path to location of custom alert scripts.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# AlertScriptsPath=${datadir}/zabbix/alertscripts
AlertScriptsPath=/usr/lib/zabbix/alertscripts
### Option: ExternalScripts
# Full path to location of external scripts.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# ExternalScripts=${datadir}/zabbix/externalscripts
ExternalScripts=/usr/lib/zabbix/externalscripts
### Option: FpingLocation
# Location of fping.
# Make sure that fping binary has root ownership and SUID flag set.
#
# Mandatory: no
# Default:
# FpingLocation=/usr/sbin/fping
FpingLocation=/usr/bin/fping
### Option: Fping6Location
# Location of fping6.
# Make sure that fping6 binary has root ownership and SUID flag set.
# Make empty if your fping utility is capable to process IPv6 addresses.
#
# Mandatory: no
# Default:
# Fping6Location=/usr/sbin/fping6
Fping6Location=/usr/bin/fping6
### Option: SSHKeyLocation
# Location of public and private keys for SSH checks and actions.
#
# Mandatory: no
# Default:
# SSHKeyLocation=
### Option: LogSlowQueries
# How long a database query may take before being logged (in milliseconds).
# Only works if DebugLevel set to 3, 4 or 5.
# 0 - don't log slow queries.
#
# Mandatory: no
# Range: 1-3600000
# Default:
# LogSlowQueries=0
LogSlowQueries=3000
### Option: TmpDir
# Temporary directory.
#
# Mandatory: no
# Default:
# TmpDir=/tmp
### Option: StartProxyPollers
# Number of pre-forked instances of pollers for passive proxies.
#
# Mandatory: no
# Range: 0-250
# Default:
# StartProxyPollers=1
### Option: ProxyConfigFrequency
# How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
# This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600*24*7
# Default:
# ProxyConfigFrequency=3600
### Option: ProxyDataFrequency
# How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
# This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600
# Default:
# ProxyDataFrequency=1
### Option: AllowRoot
# Allow the server to run as 'root'. If disabled and the server is started by 'root', the server
# will try to switch to the user specified by the User configuration option instead.
# Has no effect if started under a regular user.
# 0 - do not allow
# 1 - allow
#
# Mandatory: no
# Default:
AllowRoot=0
### Option: User
# Drop privileges to a specific, existing user on the system.
# Only has effect if run as 'root' and AllowRoot is disabled.
#
# Mandatory: no
# Default:
User=zabbix
### Option: Include
# You may include individual files or all files in a directory in the configuration file.
# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
# Include=
# Include=/usr/local/etc/zabbix_server.general.conf
# Include=/usr/local/etc/zabbix_server.conf.d/
# Include=/usr/local/etc/zabbix_server.conf.d/*.conf
### Option: SSLCertLocation
# Location of SSL client certificates.
# This parameter is used only in web monitoring.
#
# Mandatory: no
# Default:
# SSLCertLocation=${datadir}/zabbix/ssl/certs
### Option: SSLKeyLocation
# Location of private keys for SSL client certificates.
# This parameter is used only in web monitoring.
#
# Mandatory: no
# Default:
# SSLKeyLocation=${datadir}/zabbix/ssl/keys
### Option: SSLCALocation
# Override the location of certificate authority (CA) files for SSL server certificate verification.
# If not set, system-wide directory will be used.
# This parameter is used only in web monitoring and SMTP authentication.
#
# Mandatory: no
# Default:
# SSLCALocation=
####### LOADABLE MODULES #######
### Option: LoadModulePath
# Full path to location of server modules.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# LoadModulePath=${libdir}/modules
### Option: LoadModule
# Module to load at server startup. Modules are used to extend functionality of the server.
# Format: LoadModule=<module.so>
# The modules must be located in directory specified by LoadModulePath.
# It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
# LoadModule=
####### TLS-RELATED PARAMETERS #######
### Option: TLSCAFile
# Full pathname of a file containing the top-level CA(s) certificates for
# peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=
### Option: TLSCRLFile
# Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=
### Option: TLSCertFile
# Full pathname of a file containing the server certificate or certificate chain.
#
# Mandatory: no
# Default:
# TLSCertFile=
### Option: TLSKeyFile
# Full pathname of a file containing the server private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=
Code:
#! /bin/sh
### BEGIN INIT INFO
# Provides: zabbix-server
# Required-Start: $remote_fs $network
# Required-Stop: $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Should-Start: mysql
# Should-Stop: mysql
# Short-Description: Start zabbix-server daemon
### END INIT INFO
set -e
NAME=zabbix_server
DAEMON=/usr/sbin/$NAME
DESC="Zabbix server"
test -x $DAEMON || exit 0
DIR=/tmp/zabbix
PID=$DIR/$NAME.pid
RETRY=15
if test ! -d "$DIR"; then
mkdir -p "$DIR"
chown -R zabbix:zabbix "$DIR"
fi
export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
# define LSB log_* functions.
. /lib/lsb/init-functions
if [ -r "/etc/default/zabbix-server" ]; then
. /etc/default/zabbix-server
fi
case "$1" in
start)
log_daemon_msg "Starting $DESC" "$NAME"
start-stop-daemon --oknodo --start --pidfile $PID \
--exec $DAEMON >/dev/null 2>&1
case "$?" in
0) log_end_msg 0 ;;
*) log_end_msg 1; exit 1 ;;
esac
;;
stop)
log_daemon_msg "Stopping $DESC" "$NAME"
start-stop-daemon --oknodo --stop --pidfile $PID --retry $RETRY
case "$?" in
0) log_end_msg 0 ;;
*) log_end_msg 1; exit 1 ;;
esac
;;
status)
status_of_proc -p "$PID" "$DAEMON" "$NAME" && exit 0 || exit $?
;;
restart|force-reload)
$0 stop
$0 start
;;
*)
echo "Usage: /etc/init.d/$NAME {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit 0
Code:
[Unit] Description=Zabbix Server After=syslog.target After=network.target [Service] Environment="CONFFILE=/etc/zabbix/zabbix_server.conf" EnvironmentFile=-/etc/default/zabbix-server Type=forking Restart=no PIDFile=/tmp/zabbix/zabbix_server.pid KillMode=control-group ExecStart=/usr/sbin/zabbix_server -c $CONFFILE ExecStop=/bin/kill -SIGTERM $MAINPID TimeoutSec=infinity [Install] WantedBy=multi-user.target