PDA

View Full Version : Problem in zabbix_server.log


husse
17-01-2008, 13:41
When i run the following command:

tail -f /var/log/zabbix/zabbix_server.log

I see the following result..

.......
.......
.......
29127:20080117:103821 Get value from agent failed. Error: Cannot connect to [192.168.2.168:10050] [No route to host]
29127:20080117:103824 Get value from agent failed. Error: Cannot connect to [192.168.2.169:10050] [No route to host]
29127:20080117:103827 Get value from agent failed. Error: Cannot connect to [192.168.2.170:10050] [No route to host]
29127:20080117:103830 Get value from agent failed. Error: Cannot connect to [192.168.2.171:10050] [No route to host]
29127:20080117:103833 Get value from agent failed. Error: Cannot connect to [192.168.2.172:10050] [No route to host]
29127:20080117:103836 Get value from agent failed. Error: Cannot connect to [192.168.2.173:10050] [No route to host]
29127:20080117:103839 Get value from agent failed. Error: Cannot connect to [192.168.2.174:10050] [No route to host]
29127:20080117:103842 Get value from agent failed. Error: Cannot connect to [192.168.2.175:10050] [No route to host]
29127:20080117:103845 Get value from agent failed. Error: Cannot connect to [192.168.2.176:10050] [No route to host]
29127:20080117:103848 Get value from agent failed. Error: Cannot connect to [192.168.2.177:10050] [No route to host]
29127:20080117:103851 Get value from agent failed. Error: Cannot connect to [192.168.2.178:10050] [No route to host]
29127:20080117:103854 Get value from agent failed. Error: Cannot connect to [192.168.2.179:10050] [No route to host]
.......
.......
.......


A new line is being added to the log file almost every second but it is not telling me so much to understand the problem. It is trying all the IP numbers.. Why do I see this error? :confused:

Zabbix_agentd is running properly, I checked it.. As I know Zabbix_agentd is the recommended one and zabbix_agent should not be used. Should I specify in a config file or somewhere else saying that I am NOT using zabbix_agent and using zabbix_agentd..? :confused:

Thanks a lot in advance..

hs

bbrendon
17-01-2008, 14:01
Can you connect to that IP and port from the zabbix server?

Tenzer
17-01-2008, 14:21
It seems like you have set up auto discovery, and that it is searching out your network, in order to try and find Zabbix clients on any IP address.

husse
17-01-2008, 14:45
Thanks for both answers..

Do you know how to disable this auto discovery stuff..? I checked the log file but couldn't see any relevant parameter about the auto discovery option..

Actually.. I assume that it should be disabled by default and I should enable it if I need.. Why is it enabled?

This was really helpful..

Regards,

hs

Tenzer
17-01-2008, 16:17
It is disabled in the webinterface under Configuration -> Discovery. It don't think that it is enabled as default, at least I don't recall that.

husse
17-01-2008, 16:40
Thanks a lot! Now it is solved.. :)

husse
17-01-2008, 16:42
But I have bigger problems.. :S

Could you check the following thread?

http://www.zabbix.com/forum/showthread.php?p=29905#post29905

Maybe you can recommend me sth.. I am stucked on that...

Thanks again..

yas
08-04-2010, 08:29
i have same problem zabbix server not connect to agents plz help me im so tire from other solution are not worked proper

yas
18-04-2010, 06:19
hello there i have same problem : my zabbix server does not run plz help me

tchjts1
18-04-2010, 07:13
If you want someone to help you, you are going to have to provide more information other than "My server does not run".

Look through your Zabbix server and Zabbix agent logs and start pinpointing the problem.

yas
18-04-2010, 07:27
hello there any body can help me plz? i can't added hosts on zabbix server