Здраствуйте. Скажу сразу ангиский плохо знаю, поэтому скорее всего и пишу....
Суть проблемы. Решил поставить Zabbix для мониторинга 4 серверов. И так собрал из исходников deb пакеты.
apt-get source zabbix
cd /zabbix-1.6.6
dpkg-buildpackage
cd ..
dpkg -i zabbix-agent_1.6.6-2_i386.deb zabbix-server-mysql_1.6.6-2_i386.deb zabbix-frontend-php_1.6.6-2_all.deb
установилось всё без проблем.
Далее поправил php.ini руководствуясь оффициальным мануалом. Добавил алиас Alias /zabbix /usr/share/zabbix в /etc/apache2/sites-available/default
В /etc/services внёс строки
Далее мои конфиги
При заходе в вэб интерфейс на узле локальной машины (на которой установлен сам заббикс , удалённых клиентов ещё не ставил) пишет Got empty string from [127.0.0.1]. Assuming that agent dropped connection because of access permissions.
Кто может мне подсказать решение проблемы? Спасибо за ранее.
ЗЫ. В оффициальных репозиториях версия 1,1 поэтому приходиться извращаться.) Пересобирал пакет , как вручную по мануалу так и через сборку дэб пакетов, всё одно и тоже....
Суть проблемы. Решил поставить Zabbix для мониторинга 4 серверов. И так собрал из исходников deb пакеты.
apt-get source zabbix
cd /zabbix-1.6.6
dpkg-buildpackage
cd ..
dpkg -i zabbix-agent_1.6.6-2_i386.deb zabbix-server-mysql_1.6.6-2_i386.deb zabbix-frontend-php_1.6.6-2_all.deb
установилось всё без проблем.
Далее поправил php.ini руководствуясь оффициальным мануалом. Добавил алиас Alias /zabbix /usr/share/zabbix в /etc/apache2/sites-available/default
В /etc/services внёс строки
HTML Code:
# cat /etc/services | egrep zabbix zabbix_agent 10050/tcp zabbix_trappper 10051/tcp zabbix-agent 10050/udp zabbix-trapper 10051/udp
HTML Code:
# cat /etc/zabbix/zabbix_agentd.conf # This is config file for zabbix_agentd # in case the agent is started standalone from init.d (not via inetd). # # To get more information about ZABBIX, go http://www.zabbix.com ############ GENERAL PARAMETERS ################# # List of comma delimited IP addresses (or hostnames) of ZABBIX servers. # No spaces allowed. First entry is used for sending active checks. # Note that hostnames must resolve hostname->IP address and # IP address->hostname. Server=localhost # Server port for sending active checks #ServerPort=10051 # Unique hostname. Required for active checks. Hostname=localhost # Listen port. Default is 10050 #ListenPort=10050 # IP address to bind agent # If missing, bind to all available IPs #ListenIP=127.0.0.1 # Number of pre-forked instances of zabbix_agentd. # Default value is 5 # This parameter must be between 1 and 16 StartAgents=5 # How often refresh list of active checks. 2 minutes by default. #RefreshActiveChecks=120 # Disable active checks. The agent will work in passive mode listening server. #DisableActive=1 # Enable remote commands for ZABBIX agent. By default remote commands disabled. #EnableRemoteCommands=1 # Specifies debug level # 0 - debug is not created # 1 - critical information # 2 - error information # 3 - warnings # 4 - information (default) # 5 - for debugging (produces lots of information) DebugLevel=3 # Name of PID file PidFile=/var/run/zabbix-agent/zabbix_agentd.pid # Name of log file. # If not set, syslog will be used LogFile=/var/log/zabbix-agent/zabbix_agentd.log # Maximum size of log file in MB. Set to 0 to disable automatic log rotation. #LogFileSize=1 # Spend no more than Timeout seconds on processing # Must be between 1 and 30 Timeout=3 ####### USER-DEFINED MONITORED PARAMETERS ####### # Format: UserParameter=<key>,<shell command> # Note that shell command must not return empty string or EOL only #UserParameter=system.test,who|wc -l ### Set of parameter for monitoring MySQL server (v3.23.42 and later) ### Change -u<username> and add -p<password> if required #UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l #UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T" #UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q" #UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S" #UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O" #UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":" #UserParameter=mysql.version,mysql -V
HTML Code:
# cat /etc/zabbix/zabbix_server.conf # This is config file for ZABBIX server process # To get more information about ZABBIX, # go http://www.zabbix.com ############ GENERAL PARAMETERS ################# # This defines unique NodeID in distributed setup, # Default value 0 (standalone server) # This parameter must be between 0 and 999 #NodeID=0 # Number of pre-forked instances of pollers # Default value is 5 # This parameter must be between 0 and 255 #StartPollers=5 # Number of pre-forked instances of IPMI pollers # Default value is 0 # This parameter must be between 0 and 255 #StartIPMIPollers=0 # Number of pre-forked instances of pollers for unreachable hosts # Default value is 1 # This parameter must be between 0 and 255 #StartPollersUnreachable=1 # Number of pre-forked instances of trappers # Default value is 5 # This parameter must be between 0 and 255 #StartTrappers=5 # Number of pre-forked instances of ICMP pingers # Default value is 1 # This parameter must be between 0 and 255 #StartPingers=1 # Number of pre-forked instances of discoverers # Default value is 1 # This parameter must be between 0 and 255 #StartDiscoverers=1 # Number of pre-forked instances of HTTP pollers # Default value is 1 # This parameter must be between 0 and 255 #StartHTTPPollers=1 # Listen port for trapper. Default port number is 10051. This parameter # must be between 1024 and 32767 #ListenPort=10051 # Source IP address for outgoing connections #SourceIP= # Listen interface for trapper. Trapper will listen on all network interfaces # if this parameter is missing. #ListenIP=127.0.0.1 # How often ZABBIX will perform housekeeping procedure # (in hours) # Default value is 1 hour # Housekeeping is removing unnecessary information from # tables history, alert, and alarms # This parameter must be between 1 and 24 #HousekeepingFrequency=1 # How often ZABBIX will try to send unsent alerts # (in seconds) # Default value is 30 seconds SenderFrequency=30 # Uncomment this line to disable housekeeping procedure #DisableHousekeeping=1 # Specifies debug level # 0 - debug is not created # 1 - critical information # 2 - error information # 3 - warnings (default) # 4 - for debugging (produces lots of information) DebugLevel=3 # Specifies how long we wait for agent response (in sec) # Must be between 1 and 30 Timeout=5 # Specifies how many seconds trapper may spend processing new data # Must be between 1 and 300 #TrapperTimeout=5 # After how many seconds of unreachability treat a host as unavailable #UnreachablePeriod=45 # How often check host for availability during the unavailability period #UnavailableDelay=60 # Name of PID file PidFile=/var/run/zabbix-server/zabbix_server.pid # Name of log file # If not set, syslog is used LogFile=/var/log/zabbix-server/zabbix_server.log # Maximum size of log file in MB. Set to 0 to disable automatic log rotation. #LogFileSize=1 # Location for custom alert scripts AlertScriptsPath=/etc/zabbix/alert.d/ # Location of external scripts #ExternalScripts=/etc/zabbix/externalscripts # Location of fping. Default is /usr/sbin/fping # Make sure that fping binary has root permissions and SUID flag set #FpingLocation=/usr/sbin/fping # Location of fping6. Default is /usr/sbin/fping6 # Make sure that fping binary has root permissions and SUID flag set #Fping6Location=/usr/sbin/fping6 # Temporary directory. Default is /tmp #TmpDir=/tmp # Frequency of ICMP pings (item keys 'icmpping' and 'icmppingsec'). Default is 60 seconds. #PingerFrequency=60 # Database host name # Default is localhost DBHost=MY_REMOTE_HOST # Database name # SQLite3 note: path to database file must be provided. DBUser and DBPassword are ignored. DBName=zabbix # Database user DBUser=zabbix # Database password # Comment this line if no password used DBPassword=MY_PASSWD # Connect to MySQL using Unix socket? #DBSocket=/tmp/mysql.sock
Кто может мне подсказать решение проблемы? Спасибо за ранее.
ЗЫ. В оффициальных репозиториях версия 1,1 поэтому приходиться извращаться.) Пересобирал пакет , как вручную по мануалу так и через сборку дэб пакетов, всё одно и тоже....
Comment