Map update failed error: invalid parameter "/1/shape/1/width":

[Cocorino]

Map update failed error: invalid parameter "/1/shape/1/width": value must be between 1 and 600. or invalid: an integer is expected


Hello,

If you have encountered this problem, I invite you to look at the size of your shape or an object added in your map.

If the problem is "invalid: an integer is expected" check if its width and height are not floating point numbers. If this is the case (752.2) change it to a number without a comma (752) it is possible that the coordinate does not change so click several times on "apply" until you get a number without a comma (749)
If the problem is " value must be between 1 and 600", your element size may not match it so try to include it between 1 and 600, as well as its possition. If that doesn't work, I have no other solution. This person also had this problem but there was no solution. https://support.zabbix.com/browse/ZBX-19559

Good Luck!

Bonjour,

Si vous avez rencontre ce problème je vous invite a regarde la taille de votre forme ou objet ajouter dans votre carte.

Si le problème est "un entier est attendu" regarder si sa largeur et sa hauteur ne sont pas des nombres a virgule. Si cela est le cas (752.2) changer le pour un nombre sans virgule (752) il est possible que la coordonnée ne change pas alors cliquer plusieur fois sur "appliquer" jusqu'à ce que vous obtenez un nombre sans virgule (749)
Si le problème est " la valeur doit est incluse entre 1 et 600", il se peut que la taille de votre élément ne lui correspond pas donc essayer de l'inclure entre 1 et 600, tout comme sa possition. Si cela ne marche je n'est pas d'autre solution. cet personne a eu aussi ce problème mais il n'y pas eu de solution. https://support.zabbix.com/browse/ZBX-19559

Bonne chance!

[Cocorino]

Pour la procédure, je les expliquer il suffit de changer les tailles des éléments de la carte.
Sinon je suis sous CentOS 8 mais cela ne change rien, puis la version est la 6.0.2 avec comme navigateur Chrome ou Microsoft edge.

For the procedure, I explain them just change the sizes of the map elements.
Otherwise I'm runnig CentOS 8, but that doesn't change anything, then version 6.0.2 with Chrome or Microsoft edge browser and host IP

[Atsushi]

Looking at the ticket you mentioned and the ticket linked to it, it seems that you do not know how to reproduce it. Please tell me the specific reproduction procedure that other people can reproduce. Please also provide environmental information such as the OS and version you are using, the version of the various software you are using, the browser and version you are using, and the network environment.

[Cocorino]

Pour la procédure, je les expliquer il suffit de changer les tailles des éléments de la carte.
Sinon je suis sous CentOS 8 mais cela ne change rien, puis la version est la 6.0.2 avec comme navigateur Chrome ou Microsoft edge.

For the procedure, I explain them just change the sizes of the map elements.
Otherwise I'm runnig CentOS 8, but that doesn't change anything, then version 6.0.2 with Chrome or Microsoft edge browser and host IP

[jshope]

Hello,
I was getting this error as well on a newly installed Zabbix 6.2.3 on Docker. The problem, at least for me, can easily be reproduced by setting the map width in "Properties" to less than 680 and then editing the map. When you try to save the map the error message comes up. Also mentioned here ZBX-20981

Update: this doesn't seem to happen with newly created maps. Just the default map created during the install it looks like.