Template Gallery

[mehow]

3Com 2948-SFP

3com 2848-SFP - speed, operational and admin status, traffic on all ports in bps and PPS plus graphs and triggers on status changes and traffic 90% threshold.

Octets counters are 32 bit, units I can test don't support 64 bit counters.

[Starbase]

Hello mehow, any chance you can make this xml compatibel with current zabbix?

[Sc0rian]

climate cm2 monitoring.

the template has all the inbuilt sensors (temp, light, sound,humidity) also has a few graphs and triggers. Will improve when we get more sensors.

[troffasky]

Cisco Small Business SxE20x0x switches

This is for the -G5 part numbers of SFE2000, SGE2000, etc, and the PoE versions thereof. The earlier -EU part numbers don't seem to support these OIDs.

Very basic set of parameters: op status of the 5 fans, system temperature, uptime, reachability.

The switches come in a variety of port capacities from 24-52 which are just ordinary IF-MIB ports so no point duplicating all that in this template.

An SNMP walk starting at .1.3.6.1.4.1.9.6.1.101 [ie snmpwalk 172.16.99.13 .1.3.6.1.4.1.9.6.1.101] yielded no less than 134000 items for an output file of 8MB in size, so it's fair to say that for a mere edge switch, there are quite a few parameters that can be monitored!

[ua9uqb]

Eltex MES3124

Template for Ethernet switch Eltex MES3124

Description: http://www.mc240.ru/en/product/mes3124_

24 ports 10/100/1000 Base-T Ethernet, RJ-45;
4 ports 10G Base-X (slots for SFP+)
Switch performance 128 Gbps
Buffer size 12 Mb
MAC address table 16К
VLAN support 802.1Q, 4К
10Ge Stack 8xSwitches
Management SNMP, CLI, ssh, telnet
Two (AC or DC) hotswappable power supply units

[varnav]

APC Network Management Card 2

This is Zabbix 2.0 template for current models of APC Network Management Cards with or without enviromental sensor.

Tested with and supports:
AP9630
AP9631 (same as above but with env sensor)

[Speedfight]

Dell UPS (simple one)

[k.keker]

Juniper MX80

Hello! I really need help in creating a template for Juniper MX80. Need a template for the interface (in/out/unicast/broabcast).

I want the user interface is signed "ge-1/1/6 - t1-m9_p17", where "ge-1/1/6" - the name of the physical interface (OID: 1.3.6.1.2.1.2.2.1.2), and "t1 -m9_p17 "- a description of the interface configuration (OID: 1.3.6.1.2.1.31.1.1.1.18).

Juniper MX80 official mibs https://www.dropbox.com/s/6zhol4ol7a...2.4-signed.tgz

[theocastelo]

3com 2848-SFP - speed, operational and admin status, traffic on all ports in bps and PPS plus graphs and triggers on status changes and traffic 90% threshold.

Octets counters are 32 bit, units I can test don't support 64 bit counters.

Hey man,

This template ll work for a switch foundry FLS 624 ?

[markim]

Template for Nortel switch

Hello Ppl,

CAN any one help me with a template for Nortel Switch? SNMP one that can read the ports of the switch?
I have the 2.0 Zabbix version.

The Switch is a ERS1424T (Nortel).

Please help! Thanks a lot..!

[qix]

You can probably start off by using the snmp device template that ships with Zabbix 2.0. It contains discovery rules that will map network ports on most network devices.

[qix]

APC Switched Rack PDU

I've added a template for an 8 port APC Switched Rack PDU to my github, please feel free to give it a spin if you need it.

https://raw.github.com/q1x/zabbix-templates/master/devices/Template%20SNMP%20APC%20Rack%20PDU.xml

It includes triggers for On/Off/Error state of each port, uptime and load thresholds for the entire device based on the thresholds that are set on the device itself. Also a simple load graph is included. Enjoy!

[egner]

Template for Linux

Hi there,

I am searching for a Linux template that working with disk checks.
That one that come with Zabbix 2.0.5 has only 32 items. So i will be rely glad if someone can help me with one that have a lot more items and also work with zabbix 2.0.5

/Egner

[eskytthe]

Maybe this - but you need to make your own template.

http://www.muck.net/19/getting-hard-disk-performance-stats-from-zabbix

BR
Erik

[theocastelo]

Maybe this - but you need to make your own template.

http://www.muck.net/19/getting-hard-disk-performance-stats-from-zabbix

BR
Erik

amazing infos

thanks for sharing this...

[linuxsquad]

MD RAID template with auto-discovery

Is any one interested in MD RAID (software) on Linux with auto-discovery? Almost done, will be posting on github or wiki.

Testers are welcomed

OB