Hi,
i just installed zabbix 1.9.3 on a Debian Lenny x86 System and tried to monitor my homeserver and linux router (fli4l with OPT_SNMP) but ran into some problems.
I created a host for the Server:
Name: Lan Server
Group: Lan Server
Interfaces:
ip: 127.0.0.1
DNS Name: localhost
Connect: IP
Port: 161
Type: SNMP
Monitored by Proxy: (no Proxy)
Status: Monitored
First i try to add a Item by clicking on ITEMS.
Host: Lan Server
Host Interface: 127.0.0.1:161
Description: Incoming Traffic on eth0
Type: SNMPv2 Agent
SNMP OID: interfaces.ifTable.ifEntry.ifInOctets.1
SNMP Community: public
Port: 161
Key: lan_server.ifInOctets.1
Type of Information: Nummeric (Unsigned)
Data Type: Decimal
Units: bps
Use Custom multiplier: deactivated
Update interval: 30 sec.
Flexible interval: no flexible intervals
Keep history (in days): 7
keep trend (in days): 30
Status: Active
Store Value: Delta (speed per sec.)
Show Value: as is
After a few seconds SNMP Button of the host turns red saying
"Timeout while connecting to 127.0.0.1:161"
I've deleted the host completly, added a new one with same hostdata but this time i added the SNMPv2_Device tamplate to the host. But i got same result: Timeout while connecting to 127.0.0.1:161
I have tried it with DNS name localhost and also with the Network ip (192.168.6.30) but never got any SNMP data.
Since SNMPwalk works fine:
i have no idea whats going wrong here.
Any help would be aprecciated.
-MAD
i just installed zabbix 1.9.3 on a Debian Lenny x86 System and tried to monitor my homeserver and linux router (fli4l with OPT_SNMP) but ran into some problems.
I created a host for the Server:
Name: Lan Server
Group: Lan Server
Interfaces:
ip: 127.0.0.1
DNS Name: localhost
Connect: IP
Port: 161
Type: SNMP
Monitored by Proxy: (no Proxy)
Status: Monitored
First i try to add a Item by clicking on ITEMS.
Host: Lan Server
Host Interface: 127.0.0.1:161
Description: Incoming Traffic on eth0
Type: SNMPv2 Agent
SNMP OID: interfaces.ifTable.ifEntry.ifInOctets.1
SNMP Community: public
Port: 161
Key: lan_server.ifInOctets.1
Type of Information: Nummeric (Unsigned)
Data Type: Decimal
Units: bps
Use Custom multiplier: deactivated
Update interval: 30 sec.
Flexible interval: no flexible intervals
Keep history (in days): 7
keep trend (in days): 30
Status: Active
Store Value: Delta (speed per sec.)
Show Value: as is
After a few seconds SNMP Button of the host turns red saying
"Timeout while connecting to 127.0.0.1:161"
I've deleted the host completly, added a new one with same hostdata but this time i added the SNMPv2_Device tamplate to the host. But i got same result: Timeout while connecting to 127.0.0.1:161
I have tried it with DNS name localhost and also with the Network ip (192.168.6.30) but never got any SNMP data.
Since SNMPwalk works fine:
snmpwalk -v 2c -Ofn -c public 127.0.0.1:161 ifInOctets.1
.1.3.6.1.2.1.2.2.1.10.1 = Counter32: 288226569
snmpwalk -v 2c -Ofn -c public localhost:161 ifInOctets.1
.1.3.6.1.2.1.2.2.1.10.1 = Counter32: 288228105
snmpwalk -v 2c -Ofn -c public 192.168.6.30:161 ifInOctets.1
.1.3.6.1.2.1.2.2.1.10.1 = Counter32: 288228406
.1.3.6.1.2.1.2.2.1.10.1 = Counter32: 288226569
snmpwalk -v 2c -Ofn -c public localhost:161 ifInOctets.1
.1.3.6.1.2.1.2.2.1.10.1 = Counter32: 288228105
snmpwalk -v 2c -Ofn -c public 192.168.6.30:161 ifInOctets.1
.1.3.6.1.2.1.2.2.1.10.1 = Counter32: 288228406
Any help would be aprecciated.
-MAD
Comment