SNMP Trap and multiple payload

[allrise]

I think this was written on the Brent Jones website. Anyway, if you haven't done so you have to put here the path of your snmptt.conf.x file you have converted with snmpttconvert.

You should also check the snmptrapd log file on your zabbix server to see what reaches the server (need to enable logging on snmptrapd.conf file

hi!!
I configured snmptt.ini file as u mentioned in ur last post. Still no result on zabbix UI.. I even checked log files in that i can see proper traps are getting received on zabbix server..

[allrise]

I think this was written on the Brent Jones website. Anyway, if you haven't done so you have to put here the path of your snmptt.conf.x file you have converted with snmpttconvert.

You should also check the snmptrapd log file on your zabbix server to see what reaches the server (need to enable logging on snmptrapd.conf file

hi!! i am totally confused.. i can see all trap in my log files which lies in /var/log/snmptrapd.log.

i have also configure all key item as given in post http://www.brentrjones.com/?p=13

and also put the path where my snmptt.conf lies ( in brentrjones it is snmptt.conf.dell)

[TrapFiles]
snmptt_conf_files =/usr/local/share/snmp/snmptt.conf
END


i have put my zabbix_sender command in the end of snmptt.conf

but still there is not result on zabbix UI.

Can u guide me on this plzzz

[melpheos]

Try to send manually a trap with zabbix_sender to your zabbix server. What is the result ?

[allrise]

Try to send manually a trap with zabbix_sender to your zabbix server. What is the result ?

hi!! manually if I am trying to send "test trap" through zabbix_sender command than i am getting output (Latest data) on zabbix UI..

Is just that zabbix_sender command its not getting called in snmptt.conf ( in case brentrjones snmptt.conf.dell)..

I tried to look more in log file after enabling debug option.. what i found that it is not able to find EXEC zabbix_sender command in snmptt.conf even tho I have mentioned it in the file..

Wat could be reason behind it??

[melpheos]

hi!! manually if I am trying to send "test trap" through zabbix_sender command than i am getting output (Latest data) on zabbix UI..

Is just that zabbix_sender command its not getting called in snmptt.conf ( in case brentrjones snmptt.conf.dell)..

I tried to look more in log file after enabling debug option.. what i found that it is not able to find EXEC zabbix_sender command in snmptt.conf even tho I have mentioned it in the file..

Wat could be reason behind it??

what is the error message for the unability to run the EXEC command ?

Also have you enable the unkown trap logger to see it the trap does not go there.

Can you post the output of your debug file ? (clean the ip addresses first )

[allrise]

what is the error message for the unability to run the EXEC command ?

Also have you enable the unkown trap logger to see it the trap does not go there.

Can you post the output of your debug file ? (clean the ip addresses first )

hi!! this is an error i am getting
EXEC line : EXEC line not defined
this error, i found in snmptt.debug.. can u suggest solution for this..

As already mentioned in my previous post i have mentioned zabbix_sender in my snmptt.conf than also this error is occurring in snmptt.debug file...

hey if its fine with you.. can u please share ur snmptt.conf.x and snmptt.ini files

thanks in advance..

[melpheos]

Can you confirm that the EXEC command is in the snmptt.x.conf (sorry my mistake, two months without touching this and you forget the filename) file and not snmpd.conf file.

This is the line i have in my snmptt.esx.conf file

EXEC /usr/sbin/zabbix_sender -v -z zabbixserver -p 10051 -s "$3" -k vpxdTrap -o "$5 $6"

In my snmptt.dell.conf file i have

EXEC /usr/sbin/zabbix_sender -v -z zabbixserver -p 10051 -s "$A" -k "$o" -o "$3"

[allrise]

Can you confirm that the EXEC command is in the snmptt.x.conf (sorry my mistake, two months without touching this and you forget the filename) file and not snmpd.conf file.

This is the line i have in my snmptt.esx.conf file

EXEC /usr/sbin/zabbix_sender -v -z zabbixserver -p 10051 -s "$3" -k vpxdTrap -o "$5 $6"

In my snmptt.dell.conf file i have

EXEC /usr/sbin/zabbix_sender -v -z zabbixserver -p 10051 -s "$A" -k "$o" -o "$3"

hi!!

i have mentioned this command in snmptt.conf ( which is same as urs my snmptt.esx.conf)

EXEC /usr/local/sbin/zabbix_sender -v -z localhost -p 10051 -s Default_Trapper -k snmptraps -o "$aA / $A :: $s :: $N - $Fz"

[allrise]

Can you confirm that the EXEC command is in the snmptt.x.conf (sorry my mistake, two months without touching this and you forget the filename) file and not snmpd.conf file.

This is the line i have in my snmptt.esx.conf file

EXEC /usr/sbin/zabbix_sender -v -z zabbixserver -p 10051 -s "$3" -k vpxdTrap -o "$5 $6"

In my snmptt.dell.conf file i have

EXEC /usr/sbin/zabbix_sender -v -z zabbixserver -p 10051 -s "$A" -k "$o" -o "$3"

Sorry for troubling you, even I am also new to SMPTT.. can u explain wat does "$3" -k vpxdTrap -o "$5 $6" mean?

[melpheos]

Sorry for troubling you, even I am also new to SMPTT.. can u explain wat does "$3" -k vpxdTrap -o "$5 $6" mean?

This is relative to the various line in the SNMP trap received... It's of no use for you but you can find the documentation on this on the SNMPTT documentation page

[allrise]

This is relative to the various line in the SNMP trap received... It's of no use for you but you can find the documentation on this on the SNMPTT documentation page

hi!! thanks for info.. but i was successfull in configuring the SNMPTT it was very tedious but i somehow manage to configure it.. i thank you for all ur help...