# tHIs is a config file for Zabbix Agent (Unix)
# To get more information about Zabbix, visit http://www.zabbix.com
############ GENERAL PARAMETERS #################
### Option: PidFile
# Name of PID file.
#
# Mandatory: no
# Default:
PidFile=/tmp/zabbix_agentd.pid
### Option: LogFile
# Name of log file.
# If not set, syslog is used.
#
# Mandatory: no
# Default:
# LogFile=
LogFile=/tmp/zabbix_agentd.log
### Option: LogFileSize
# Maximum size of log file in MB.
# 0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
LogFileSize=10
### Option: DebugLevel
# Specifies debug level
# 0 - no debug
# 1 - critical information
# 2 - error information
# 3 - warnings
# 4 - for debugging (produces lots of information)
#
# Mandatory: no
# Range: 0-4
# Default:
DebugLevel=3
DebugLevel=3
### Option: SourceIP
# Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=
### Option: EnableRemoteCommands
# Whether remote commands from Zabbix server are allowed.
# 0 - not allowed
# 1 - allowed
#
# Mandatory: no
# Default:
EnableRemoteCommands=1
### Option: LogRemoteCommands
# Enable logging of executed shell commands as warnings
# 0 - disabled
# 1 - enabled
#
# Mandatory: no
# Default:
LogRemoteCommands=1
##### Passive checks related
### Option: Server
# List of comma delimited IP addresses (or hostnames) of Zabbix servers.
# No spaces allowed. First entry is used for receiving list of and sending active checks.
# Note that hostnames must resolve hostname->IP address and IP address->hostname.
# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
#
# Mandatory: yes
# Default:
# Server=
Server=192.168.1.250
### Option: Hostname
# Unique, case sensitive hostname.
# Required for active checks and must match hostname as configured on the server.
#
# Default:
# Hostname=system.uname
Hostname=CLUB_AMIS.inetconsulting.local
### Option: ListenPort
# Agent will listen on this port for connections from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default:
ListenPort=10050
### Option: ListenIP
# Agent will listen on the specified interface.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0
# ListenIP=127.0.0.1
### Option: DisablePassive
# Disable passive checks. The agent will not listen on any TCP port.
# Only active checks will be processed.
# 0 - do not disable
# 1 - disable
#
# Mandatory: no
# Default:
DisablePassive=0
##### Active checks related
### Option: DisableActive
# Disable active checks. The agent will work in passive mode listening for server.
#
#DisableActive=1
### Option: ServerPort
# Server port for retrieving list of and sending active checks.
#
# Mandatory: no
# Default:
ServerPort=10051
### Option: RefreshActiveChecks
# How often list of active checks is refreshed, in seconds.
#
# Mandatory: no
# Range: 60-3600
# Default:
RefreshActiveChecks=120
### Option: BufferSend
# Do not keep data longer than N seconds in buffer.
#
# Mandatory: no
# Range: 1-3600
# Default:
# BufferSend=5
### Option: BufferSize
# Maximum number of values in a memory buffer. The agent will send
# all collected data to Zabbix Server or Proxy if the buffer is full.
#
# Mandatory: no
# Range: 1-65535
# Default:
# BufferSize=100
### Option: MaxLinesPerSecond
# Maximum number of new lines the agent will send per second to Zabbix Server
# or Proxy processing 'log' and 'logrt' active checks.
# The provided value will be overridden by the parameter 'maxlines',
# provided in 'log' or 'logrt' item keys.
#
# Mandatory: no
# Range: 1-1000
# Default:
# MaxLinesPerSecond=100
############ ADVANCED PARAMETERS #################
### Option: StartAgents
# Number of pre-forked instances of zabbix_agentd that process passive checks.
#
# Mandatory: no
# Range: 1-16
# Default:
StartAgents=3
### Option: Timeout
# Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3
### Option: Include
# You may include individual files or all files in a directory in the configuration file.
#
# Mandatory: no
# Default:
# Include=
# Include=/etc/zabbix/zabbix_agent.userparams.conf
# Include=/etc/zabbix/zabbix_agentd/
####### USER-DEFINED MONITORED PARAMETERS #######
### Option: UnsafeUserParameters
# Allow all characters to be passed in arguments to user-defined parameters.
# 0 - do not allow
# 1 - allow
#
# Mandatory: no
# Range: 0-1
# Default:
# UnsafeUserParameters=0
UnsafeUserParameters=1
### Option: UserParameter
# User-defined parameter to monitor. There can be several user-defined parameters.
# Format: UserParameter=<key>,<shell command>
# Note that shell command must not return empty string or EOL only.
# Example: UserParameter=system.test,who|wc -l
UserParameter=system.test,who|wc -l
### Set of parameters for monitoring MySQL server (v3.23.42 and later)
### Change -u<username> and add -p<password> if required
UserParameter=mysql.ping,mysqladmin -uroot -ppassw0rd ping|grep alive|wc -l
UserParameter=mysql.uptime,mysqladmin -uroot -ppassw0rd status|cut -f2 -d":"|cut -f1 -d"T"
UserParameter=mysql.threads,mysqladmin -uroot -ppassw0rd status|cut -f3 -d":"|cut -f1 -d"Q"
UserParameter=mysql.questions,mysqladmin -uroot -ppassw0rd status|cut -f4 -d":"|cut -f1 -d"S"
UserParameter=mysql.slowqueries,mysqladmin -uroot -ppassw0rd status|cut -f5 -d":"|cut -f1 -d"O"
UserParameter=mysql.qps,mysqladmin -uroot -ppassw0rd status|cut -f9 -d":"
UserParameter=mysql.version,mysql -V
UserParameter=iax.status,sudo /usr/sbin/asterisk -rvvvvvx 'iax2 show registry'|grep Registered |wc -l
#UserParameter=sip.status,sudo /usr/sbin/asterisk -rvvvvvx 'sip show registry'|grep Registered |wc -l
UserParameter=active.calls,sudo /usr/sbin/asterisk -rvvvvvx 'show channels'|grep --text -i 'active call'|awk '{print $1}'
UserParameter=asterisk.status,sudo /etc/init.d/asterisk status | awk '{print $5}'
Comment