OID of toner by the Kyocera printer does not show a percentage

[from.hell]

Hello!

We use Zabbix to the toner levels to monitor
all network printers in our company.
At the Sharp printers is no problem,
have in their OID for the MIB, a toner,
which is displayed directly in %.
But the Kyocera printers and HP printers are not directly
displayed as a %, you must calculate the value of the first to come to %.
Example:
SNMPv2-SMI:: mib-2.43.11.1.1.8.1.1 = INTEGER: 20000 * * Maximum toner
SNMPv2-SMI:: mib-2.43.11.1.1.8.1.2 = INTEGER: 225000
SNMPv2-SMI:: mib-2.43.11.1.1.9.1.1 = INTEGER: 5200 * Current toner *

100 * 5200/20000 = 26%

How can I adjust to the elements in Zabbix,
he calculates the OID he draws directly so?
Now when I click Audit - Current data and I go look at the toner for this printer writes Zabbix 4 K%.
But this is false. I wish that he writes directly 26%,
just as it did at the Sharp. How does it work?

[richlv]

if those printers don't have an oid that directly gives percentage, you should gather max/current values separately and create a calculated item to store percentage.

[from.hell]

Okay!
Do I have to then create a template or how does that then?
And another thing: Can't Zabbix display no negative values (eg, -3)?

[richlv]

Do I have to then create a template or how does that then?
And another thing: Can't Zabbix display no negative values (eg, -3)?

well... these are different questions thus separate threads might be preferred. but yeah, zabbix should be able to display negative values as long as data type is set to float.

[psurmont]

Sharp p^rinter Template

Late reply but may be from.hell can help me ... I am searching for the sharp printers template for zabbix. If u have it i would be very interrested.

Best regards.