SNOM Handsets

[chivasregal]

Hi There - was wondering if anyone has had any success monitoring active registrations on any snom handsets (or monitoring anything on them actually)

http://wiki.snom.com/Category:HowTo:SNMP

Have gone through this and can query those OID's via SNMPGET (from the Zabbix server) directly, but not able to collect any data if i set those OID's up as an Item in Zabbix?

The Item config is: snmpv2 type, OID in the OID section (but cant find the key for these specifics? could be the issue??)

Any assistance would be great.

[steveboyson]

Can you post a screenshot of your item definitions? As long as your are using raw OIDs (and you can query from your zabbix server) it should definitely work.

Are SNMP_COMMUNITY and SNMP_VERSION correct? In the link shown above they're using SNMPv1 not SNMPv2 as stated in your post.

[chivasregal]

When you try and use the raw OID, it still requires a "KEY" right? The link posted lists OID's and no keys.

Thats my issue? I think?

[steveboyson]

chivasregal, as I mentioned before pls. post a screenshot of your item definition.

As a reference, see this:

https://www.netzwerk-aktiv.com/owncloud/public.php?service=files&t=238660dec2fb21c8010fd07236044297

For "SNMP OID", you have to enter the full OID as stated in the SNOM website.
For "key" you can choose whatever you want, just give it a telling name.
Pls. check that Port, community and "data type" are set correctly.

[chivasregal]

All good - working as intended. It seems i was not completing the Key section thinking that there was a unique Key required to the raw OID data. Which doesn't seem to be the case afterall.

Thanks for your prompt and very helpful assistance.