Ad Widget

Collapse

Collect SNMP Cisco 2960 doesn´t Work!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • klsouza1
    Junior Member
    • Jul 2018
    • 2

    #1

    Collect SNMP Cisco 2960 doesn´t Work!

    Hi Guys,
    I have a problem! Actually have a simple network topology in my Office. We have 1 Core Switch Core ( WS-C3650-24TD - cat3k_caa-universalk9) model Cisco, however have connect that core 2 group of switches in floor, in which group have 2 switch connect in stacks, follow model: Model C2960X -( IOS c2960x-universalk9-mz.150-2.EX3/c2960x-universalk9-mz.150-2.EX3.bin) - Cisco. Have 1 Proxy Zabbix connect directly in 1 floor switch, Can get in Switch Core normally, but trie gave get in any floor switch can´t collect data or Mibs.
    Follow error that are showing:
    [root@zxprxoffic03 ~]# tcpdump -i p2p1 -n dst host 10.130.0.5
    tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
    listening on p2p1, link-type EN10MB (Ethernet), capture size 262144 bytes

    [root@zxprxoffic03 ~]# snmpwalk -v 2c -c Stelo_Zabbix@NOC 10.130.0.5
    Timeout: No Response from 10.140.0.14
    I create a ACL SMNP, but doesn´t work!
    Both configuration in switches are similar!
    Detail: ZabbixProxy Server are directly connect in floor switch.
Working...