How to monitor Bixolon label printer?

[Vac]

Good day to you!
Please somebody explain me how can I monitor Bixolon label printer.
Thanks in advice!

[donpaul]

Hi, This will help!

Self Test

1. You can check the various settings of the printer by running the self test.
2. The procedure of running the self test is as follows.
2-1. Check whether the paper is mounted properly.
2-2. Turn on the device while depressing the Feed button.
2-3. Release the Feed button after 2 ~ 3 seconds.
2-4. The printer will print firmware version, DIP switch settings, and communication settings.
2-5. Paper indicator light keeps blinking. Press the Feed button one more time to continue printing.
2-6. The printer prints “ *** COMPLETE *** “ and the self test is completed.

Let me know if you still have any issue.

Regards.

https://robloxfever.com/roblox-deathrun-codes/

[Vac]

Thanks for your help!

But, my problem is a bit more complicated. I want to monitor these settings (out of paper, status, etc.) via network.