Setup of a Trigger

[zabbix-tech]

Hello everyone,

I wanted to know how to configure a trigger when the value is higher than X and lower than Y (ex: between 80% and 90%)? I attach the current configuration, zabbix triggers an alert when you exceed 80%.

Thanks

[1berto]

{host:item.last()}>80 and {host:item.last()}<90
Didn't work?
Also depending on what you want, this would be better:
{host:item.min(#3)}>80 and {host:item.max(#3)}<90
This will fire the trigger if the last 3 values are between 80 and 90

[zabbix-tech]

Thank you 1berto for your response,
Indeed, I would like to monitor the free space of my equipment. I want that my zabbix alert me when the available space is between 80% and 90%.
I've already tried {host:item.last()}>80 and {host:item.last()}<90. But the problem with this settings is that it triggers an alert even when the available space is at 50 % (because we've configured it to alert us when it's <90).

[zabbix-tech]

I've already tried with this configuration but it doesn't work !

[1berto]

Strange...
with the and operator this shouldn't occur... But, let's try some other ways:
Using min(#1) and max(#1) makes no sense (min of 1 and max of 1 will be just the value, anyway).
So first try to use just last(), my first sugestion, and just {host:item.last()}>80
Also check the 'last values' and/or the zabbix_get result of the item.