Jacarta Interseptor temp sensors

[awoodward]

Hi All
New to Zabbix and getting round templates ect.
We have several Jacarta Interseptor temp sensors in our dc which id like to link into Zabbix, however all i have is a the OID and MIB files, can anyone help ?

https://www.jacarta.com/wp-content/uploads/interSeptor-Alarm-OIDs.pdf

[ISiroshtan]

The question here is what exactly you want to receive as end result? I'm not really sure some one will be writing a full template for you... then what do i know about how much free time ppl might have


Anyhow, MIB you shared can be monitored actively. I'd say you need to create at least 2 SNMP discoveries:

#1 for isDeviceMonitorTemperatureTable .1.3.6.1.4.1.19011.1.3.2.1.3.1.1

.1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.1 - should be indexes
.1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.2 - sensor name
.1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.3 - temperature value of sensor
.1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.4 - sensor alarm status

In theory you can setup only sensor name and alarm status collection, but might as well collect raw temperature value for possible reference analysis.

#2 for isDeviceMonitorHumidityTable .1.3.6.1.4.1.19011.1.3.2.1.3.1.2. Structure of elements is pretty much same as on previous table

There is also #3 - isDeviceMonitorDigitalInTable .1.3.6.1.4.1.19011.1.3.2.1.3.1.3 but i have no clue what that table actually contains. Descriptions goes like

 The digital input monitoring table, to provides
overall status of digital input.

which still does not really explains what is it about to me


Also I'd guess there should be another MIB file related to SNMP traps. This one only contains section related to .1.3.6.1.4.1.19011.1.3.2 but in that pdf you gave link to 1.3.6.1.4.1.19011.1.3.1 OIDs mentioned. If you find that MIB instead of actively collecting data you can just rely on sensors sending you Traps when something is outside of norm. Tho I'd prefer to collect data into Zabbix still.

[awoodward]

HI
Of curse not after the full monty.
The basics is i'm after is collection of temp data and humidity data for zabbix to then produce a trigger for overtemp.
very out of my depth on this aspect OID & MIBs
Ash

[ISiroshtan]

OK, mate, could you show result of snmpwalk of .1.3.6.1.4.1.19011.1.3.2.1.3.1.1 and .1.3.6.1.4.1.19011.1.3.2.1.3.1.2 tables? I dont have said sensor, so not really sure what it stores inside. MIB describes it, but.. I'd like to actually see the data.

[awoodward]

Hi Sadly the sensor its self doesn't allow snmpwalk, on its interface only gives set commands.