Local Discovery of Switch Ports

[nabberuk]

I'm building out a SNMPv3 template for a Unifi Switch. I've done an SNMP walk and have highlighted OIDs for data such as uptime, model and device name. Where i'm a little confused is with created a discovery rule to add in the switch ports.

On the switch in question there are 26 ports and i can see the switch port names go from iso.3.6.1.2.1.31.1.1.1.18.1 to iso.3.6.1.2.1.31.1.1.1.18.26 (although there are some empty strings after which i will likely have to filter out)

For the Discovery rule i have

Key: net.if.discovery
OID: discovery[{#IFNAME},iso.3.6.1.2.1.31.1.1.1.18]

For an item prototype i have

Key: port.name
OID: iso.3.6.1.2.1.31.1.1.1.18.{#SNMPINDEX}

In my mind, the item should index through but when its running i get nothing.

Any tips would be appreciated.

[jtnfoley]

Start with minb2zabbix then customize the resulting template?

[Markku]

The recommendation is to use numeric OIDs only (https://www.zabbix.com/documentation...ate_items#snmp), otherwise you need to ensure all the MIBs are correctly installed.

Markku