Implementing Dell Switch MIBs?

[[email protected]]

Greetings!

We have Dell S5248F-ON switches. We downloaded the MIBs from Dell, but they came as a set of different files (see below). We only need to monitor the basics, like interface statistics (xfer bytes/sec, rcv bytes/sec, and other ethernet-related stats, bridge forwarding database, etc.), plus simple chassis and OS info like model, OS version, memory and CPU utilization, temperature, and power supplies). We don't need all the other stuff in all those MIBs.

We used Sean Bradley's SNMP2ZABBIX script to convert a couple of MIBs to XML and successfully imported them, but we can only apply one MIB to a switch. For example, we can apply the CHASSIS mib fine, but it does not monitor any interfaces. If we then try to import the Etherlike-MIB or the IF-MIB, we get an error that OIDs already exist. Can anyone tell us which MIB files we need, which ones are dependent on others, and how to import multiple ones?

Any SNMP experts would be greatly appreciated!


BRIDGE-MIB.mib
DELLEMC-OS10-BGP4V2-MIB.mib
DELLEMC-OS10-CHASSIS-MIB.mib
DELLEMC-OS10-PRODUCTS-MIB.mib
DELLEMC-OS10-SMI-MIB.mib
DELLEMC-OS10-TC-MIB.mib
ENTITY-MIB.mib
EtherLike-MIB.mib
HOST-RESOURCES-MIB.mib
IANA-ADDRESS-FAMILY-NUMBERS-MIB.mib
IANA-ENTITY-MIB.mib
IANA-RTPROTO-MIB.mib
IANAifType-MIB.mib
IEEE8021-PFC-MIB.mib
IEEE8023-LAG-MIB.mib
IF-MIB.mib
INET-ADDRESS-MIB.mib
IP-FORWARD-MIB.mib
IP-MIB.mib
LLDP-EXT-DOT1-MIB.mib
LLDP-EXT-DOT3-MIB.mib
LLDP-MIB.mib
OSPF-MIB.mib
OSPFV3-MIB.mib
P-BRIDGE-MIB.mib
Q-BRIDGE-MIB.mib
RFC-1212.mib
RFC1155-SMI.mib
RFC1213-MIB.mib
RFC1271-MIB.mib
RMON-MIB.mib
RMON2-MIB.mib
SFLOW-MIB.mib
SNMP-FRAMEWORK-MIB.mib
SNMP-MPD-MIB.mib
SNMP-TARGET-MIB.mib
SNMP-USER-BASED-SM-MIB.mib
SNMP-VIEW-BASED-ACM-MIB.mib
SNMPv2-CONF.mib
SNMPv2-MIB.mib
SNMPv2-SMI.mib
SNMPv2-TC.mib
TCP-MIB.mib
TOKEN-RING-RMON-MIB.mib
UDP-MIB.mib
UUID-TC-MIB.mib

[Hamardaban]

For monitoring via snmp mib files are optional.
You can create your template with only the metrics you need.
To do this, you will need OIDs of metrics that you can get from MIB or snmpwalk or other sources.

https://www.zabbix.com/documentation/current/en/manual/config/items/itemtypes/snmp