SNMPTRAP REGEXP Zabbix 3.0

[felipecaldeira]

Good Morning,
I'm new with Zabbix, and trying to set a device (PABX) with shipping through SNMPTRAP via regexp. I'm able to receive alarms from this center, however still can not clear the status when resolved. Below I will inform the information and settings.
I thank anyone who can help me, because I've read several articles, but I could not walk.
Thank you.

PBX alarm indicating an error severity 2:

9:56:50 2016/04/19 ZBXTRAP 192.168.2.2
PDU INFO:
notificationtype TRAP
version 1
receivedfrom UDP: [192.168.2.2]:39686->[192.168.0.20]
errorstatus 0
messageid 0
community public
transactionid 374
errorindex 0
requestid 1557553277
VARBINDS:
DISMAN-EVENT-MIB::sysUpTimeInstance type=67 value=Timeticks: (6916743) 19:12:47.43
SNMPv2-MIB::snmpTrapOID.0 type=6 value=OID: MX-ONE-TS-ALARM-MIB::mxAlarmMinor
MX-ONE-TS-ALARM-MIB::mxalHandle.99969 type=2 value=INTEGER: 99969
MX-ONE-TS-ALARM-MIB::mxalFrom.99969 type=4 value=STRING: "Lim 1, Unit "
MX-ONE-TS-ALARM-MIB::mxalFaultCode.99969 type=4 value=STRING: "1:665 "
MX-ONE-TS-ALARM-MIB::mxalSeverity.99969 type=2 value=INTEGER: 2
MX-ONE-TS-ALARM-MIB::mxalWhere.99969 type=4 value=STRING: "Lim 1 "
MX-ONE-TS-ALARM-MIB::mxalExplanation.99969 type=4 value=STRING: "Test alarm, I did this"
MX-ONE-TS-ALARM-MIB::mxalNoticed.99969 type=2 value=INTEGER: 2
MX-ONE-TS-ALARM-MIB::mxalNoticedNote.99969 type=4 value=""


PBX alarm indicating cleaning:

09:57:52 2016/04/19 ZBXTRAP 192.168.2.2
PDU INFO:
notificationtype TRAP
version 1
receivedfrom UDP: [192.168.2.2]:39686->[192.168.0.20]
errorstatus 0
messageid 0
community public
transactionid 375
errorindex 0
requestid 1557553278
VARBINDS:
DISMAN-EVENT-MIB::sysUpTimeInstance type=67 value=Timeticks: (6922942) 19:13:49.42
SNMPv2-MIB::snmpTrapOID.0 type=6 value=OID: MX-ONE-TS-ALARM-MIB::mxAlarmOpClear
MX-ONE-TS-ALARM-MIB::mxalHandle.99969 type=2 value=INTEGER: 99969
MX-ONE-TS-ALARM-MIB::mxalFrom.99969 type=4 value=STRING: "Lim 1, Unit "
MX-ONE-TS-ALARM-MIB::mxalFaultCode.99969 type=4 value=STRING: "1:665 "
MX-ONE-TS-ALARM-MIB::mxalSeverity.99969 type=2 value=INTEGER: 2
MX-ONE-TS-ALARM-MIB::mxalWhere.99969 type=4 value=STRING: "Lim 1 "
MX-ONE-TS-ALARM-MIB::mxalExplanation.99969 type=4 value=STRING: "Test alarm, I did this"
MX-ONE-TS-ALARM-MIB::mxalNoticed.99969 type=2 value=INTEGER: 2
MX-ONE-TS-ALARM-MIB::mxalNoticedNote.99969 type=4 value=""

Triggers Alarme:

{Template SNMP trap Generic:snmptrap[MX-ONE-TS-ALARM-MIB::mxAlarmMinor].regexp(.*)}=1

Triggers cleaning:

{Template SNMP trap Generic:snmptrap[MX-ONE-TS-ALARM-MIB::mxAlarmOpClear].regexp(.*)}=1

[nic0dk]

Hi,

did you find a solution on this trap problem?
i have something similar but trying to create items via prototype for each device.

[DmitryL]

Hello felipecaldeira,

So you are getting traps in both items, but are not able to recover first item from Problem to OK?
Please share trigger expression of that item.