Brocade SNMP oid not consistency

[sysadm01]

Hello.

I have some Brocade SAN switch.
And I monitor SFP power using zabbix

But Brocade oid has no consistency after iso.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.20 4

So I can't monitor like this .1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.204 .100.45.16.0.0.0.0.0.0.0.0.{#SNMPINDEX}

can i using wild card in SNMP OID like this .1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.204 .**********.{#SNMPINDEX}

how can i fix?

below is
SAN switch 1
iso.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.20 4.100.45.16.0.0.0.0.0.0.0.0.128 = STRING: "NA"
SAN switch 2
iso.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.20 4.100.38.16.0.0.0.0.0.0.0.0.128 = STRING: "NA"
SAN switch 3
iso.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.20 4.97.245.240.0.0.0.0.0.0.0.0.128 = STRING: "NA"
SAN switch 4
iso.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.20 4.100.43.112.0.0.0.0.0.0.0.0.128 = STRING: "NA"
SAN switch 5
iso.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.20 4.225.210.162.0.0.0.0.0.0.0.0.128 = STRING: "NA"
SAN switch 6
iso.3.6.1.4.1.1588.2.1.1.1.28.1.1.4.16.0.216.31.20 4.223.177.234.0.0.0.0.0.0.0.0.128 = STRING: "NA"