Zabbix implement

[zariza]

Hi,

We have customer that required to monitor their network. Diagram as below:

router (internet) --> switch (cisco) --> lan switch

Cisco have many vlan there. Each vlan represent department. From cisco switch there other LAN switch, connect to each department. Is it possible to implement it without be as gateway? Each vlan have different ip. So i want to capture all ip. Please advice.

Thanks.

[dalamar]

This should be fairly easy. It is a lot of information to look through, but if you snmpwalk to your switch it will list the specific value assigned to each Vlan. Then you can monitor based on that string, but all of your vlans must have an interface configured.