I'm adding some Cisco switches and getting data via SNMP. I used one of the default templates, making a clone of it so I can modify it. Zabbix had temperature thresholds set for warning and critical much lower then Cisco. Zabbix had alarms for the temps. I did find the macros for the warn and critical thresholds and raised them. That removed the normal temp alarms.
However, Zabbix is still showing an alarm for "Te2/1/7 Module Temperature Sensor: Temperature is above critical threshold>60c" This seems to be for the actual temperature sensor device in the switch. However, in the template, triggers, macros, everywhere, I do not see anything related to it. In Macros, none of the temp ones have a threshold of 60 any more.
So how, where, is this alarm coming from, where do I change that threshold. Or maybe, since it already had various other temp trigger/alarms, do I just silence/disable that exact alarm?
However, Zabbix is still showing an alarm for "Te2/1/7 Module Temperature Sensor: Temperature is above critical threshold>60c" This seems to be for the actual temperature sensor device in the switch. However, in the template, triggers, macros, everywhere, I do not see anything related to it. In Macros, none of the temp ones have a threshold of 60 any more.
So how, where, is this alarm coming from, where do I change that threshold. Or maybe, since it already had various other temp trigger/alarms, do I just silence/disable that exact alarm?
Comment