Widget to show status of disks in raid array of 24 bays?

[marp]

Hi,

is it possible to create widget to show status of all drives in raid array. Currently getting data from HPE380 using SNMP template. I can see items from SNMP agent for this host as:

Physical disk discovery: Port 1I Box 1 Bay 1: Physical disk status

Physical disk discovery: Port 1I Box 1 Bay 2: Physical disk status
....
Physical disk discovery: Port 1I Box 1 Bay 24: Physical disk status

If I use top hosts or honeycomb widget, I can add Item patterns one by one, but I need to select 24 patterns manually.

Is there is a way how to show widget with status for ech item - Port1| Box1 Bay 1-24 - in bar or dots or just ok for each drive(bay)?
OR
loop through each disk status and have widget with "all drives ok" or some number if any drive fails?

Maybe it was answered before, but I can't find any example in manual. I'm using Zabbix 7.0 and I'm new with Zabbix. Can you point me in right direction?

Thanks Martin

[Hamardaban]

Why do you need to look at the condition of the disks if everything is fine?
You need to be aware of problems when they occur!
And for this, triggers are used that generate problems that are visualized.
I recommend reading the system documentation and starting with a monitoring concept.

[marp]

Thanks, but this is not the answer I'm looking for. My question is whether it's possible or not. The disk status was just an example. It could be the same for the temperature of 30 sensors I would like to see in one widget. You might ask why I want to see the temperature of each sensor before a trigger is set. I would like to monitor if the temperature in some rooms starts to rise, approaching the limit. Sensor readings will be like Sensor 1, 2, ... 30 from the management board via SNMP.