Zabbix handle SNMP dynamic OID for one item

[scheisenberg]

Hi
I have some trouble for SNMP monitoring due to the SNMP is dynamic for one item.
the device is Huawei network switch, the monitoring function is NQA(like cisco IP SLA), we can configure some icmp or udp echo test on network device for testing network quality from device to destination IP. we can retrieve the test result by SNMP, those test is running on device periodic like 1 time/minute.

the basic OID is: 1.3.6.1.4.1.2011.5.25.111.4.1.1.3
and it has 4 ext OID as index: nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
I am using LLD to get the extend OID for other basic OID

there is my trouble:
ext OID nqaResultsIndex is changed when it the testing go to next turn.
example: theSNMP results are value for one item at diffrent time, it is changed. when I using LLD the device item will always increaming.

did anyone meet such problem before? any clue to fix it, thanks

[root@VM-SHSH-04-001 ~]# snmpwalk -v 2c -c 192.168.254.6 .1.3.6.1.4.1.2011.5.25.111.4.1.1.26
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3818.1 = Gauge32: 47
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3819.1 = Gauge32: 47
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3820.1 = Gauge32: 47
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3821.1 = Gauge32: 47
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3822.1 = Gauge32: 47
next mintues:

SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3823.1 = Gauge32: 47
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3824.1 = Gauge32: 47
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3825.1 = Gauge32: 48
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3826.1 = Gauge32: 47
SNMPv2-SMI::enterprises.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 3827.1 = Gauge32: 47

[metadx]

u can try this OID, the value of the last result
.1.3.6.1.4.1.2011.5.25.111.4.1.1.26.6.115.97.1 00.109.105.110.9.99.104.101.110.103.100.117.71.87. 0.0

[doncelab]

Faced exactly the same problem. Could you solve this problem? Maybe somehow you can instead of .3827. substitute regex record?

[Noobz]

"Zabbix handle SNMP dynamic OID for one item"
Have you searched for "zabbix dynamic OID"? Dynamic OID is a built in function.