Discovery Shows Hosts on both the Network and Broadcast Addresses
Here is my issue:
(In case the images are not displayed, here are the Dropbox links: https://www.dropbox.com/s/ka40t1042m...bix-1.PNG?dl=0 and https://www.dropbox.com/s/9mp7lq0e3z...bix-2.PNG?dl=0)
As you can see, if do do a 'slash' mask; and the IP range is then subnetted, I see duplicates hosts for both the network address (".0") and the broadcast address (".63").
How do I frame this out? In my case, I current have 35 subnets in the "10.1.0.0/16" IP range. I do not want perform individual subnet definitions, eg, "10.1.3.1-62","10.1.4.1-62", etc.
Thanks,
Chris
(In case the images are not displayed, here are the Dropbox links: https://www.dropbox.com/s/ka40t1042m...bix-1.PNG?dl=0 and https://www.dropbox.com/s/9mp7lq0e3z...bix-2.PNG?dl=0)
As you can see, if do do a 'slash' mask; and the IP range is then subnetted, I see duplicates hosts for both the network address (".0") and the broadcast address (".63").
How do I frame this out? In my case, I current have 35 subnets in the "10.1.0.0/16" IP range. I do not want perform individual subnet definitions, eg, "10.1.3.1-62","10.1.4.1-62", etc.
Thanks,
Chris