SNMP Traps Email

[rohanp]

Hi Guys,

I have a Zabbix server configured to send an email whenever an SNMP Trap is received. Whats happening is this Trap message is being forwarded by Zabbix they way it's received.

However, this Trap message contains lots of unnecessary information which makes the whole email very confusing and difficult to read.

Is it possible to customise the email into a more readable format?

Regards

[jashan]

SNMP traps

Hey can u guide me how to have SNMP traps from cisco device. As am unable to get traps.


Any help would be appreciated.


Regards,
Jashan

[jashan]

SNMP traps

Hi
can u guide me how to recieve SNMP traps from a network device.\, as currently am unable to get these.


Any help would be appreciated.


Regards,
Jashan

[rohanp]

Hi,

Any advise please?

Thanks

[batchenr]

Hi,

Any advise please?

Thanks

can you post how you configured the Action message ?
and the message that you get ?

[rohanp]

Hi,

I cave configured a trigger called "unmatched SNMP trap received from{HOST.NAME}".

The above trigger is linked to "Template:SNMP Trap Fallback".

Therefor, whenever an SNMP trap is received, the above trigger sends an email. Email setting is set to default.

Below is the copy of an example email,


Trigger: Unmatched SNMP trap received from AppearTV 01 Trigger status: OK Trigger severity: Information Trigger URL:

Item values:

1. SNMP trap fallback (AppearTV 01:10.xx.xx.xx:snmptrap.fallback): 10:48:35 2017/06/26 PDU INFO:
notificationtype TRAP
version 0
receivedfrom UDP: [10.xx.xx.xx]:48167->[10.yy.yy.yy]:162
errorstatus 0
messageid 0
community public
transactionid 38947
errorindex 0
requestid 0
VARBINDS:
DISMAN-EVENT-MIB::sysUpTimeInstance type=67 value=Timeticks: (2704672004) 313 days, 0:58:40.04
SNMPv2-MIB::snmpTrapOID.0 type=6 value=OID: APPEARTV-TRAPCONTROL-MIB::trapControlMsgTrap
APPEARTV-MESSAGES-MIB::msgSequenceNumber.1238 type=2 value=INTEGER: 1238
APPEARTV-MESSAGES-MIB::msgId.1238 type=2 value=INTEGER: 1048612
APPEARTV-MESSAGES-MIB::msgText.1238 type=4 value=STRING: "Link down on dataport B"
APPEARTV-MESSAGES-MIB::msgSourceName.1238 type=4 value=STRING: "Network"
APPEARTV-MESSAGES-MIB::msgSeverity.1238 type=2 value=INTEGER: 5
APPEARTV-MESSAGES-MIB::msgDetailPresent.1238 type=2 value=INTEGER: 0
APPEARTV-MESSAGES-MIB::msgGenerationTime.1238 type=4 value=STRING: "2017-06-26 10:51:21"
APPEARTV-MESSAGES-MIB::msgSlot.1238 type=2 value=INTEGER: 5
APPEARTV-MESSAGES-MIB::msgPort.1238 type=2 value=INTEGER: -1
APPEARTV-MESSAGES-MIB::msgInstance.1238 type=2 value=INTEGER: 1
APPEARTV-MESSAGES-MIB::msgCardId.1238 type=2 value=INTEGER: 13
SNMP-COMMUNITY-MIB::snmpTrapAddress.0 type=64 value=IpAddress: 10.98.105.211
SNMP-COMMUNITY-MIB::snmpTrapCommunity.0 type=4 value=STRING: "public"
SNMPv2-MIB::snmpTrapEnterprise.0 type=6 value=OID: APPEARTV-TRAPCONTROL-MIB::appearTvTrap
2. *UNKNOWN* (*UNKNOWN*:*UNKNOWN*:*UNKNOWN*): *UNKNOWN* 3. *UNKNOWN* (*UNKNOWN*:*UNKNOWN*:*UNKNOWN*): *UNKNOWN*

Original event ID: 6928409

[batchenr]

look here :

https://www.zabbix.com/forum/showthread.php?t=22721

you need to find a way to filter the snmp3 trap info itself.
seems your ,message configuration is ok