How to use UCD-SNMP-MIB?

[Crazy Marty]

I'm confused about how to create Items to represent elements of the arrays in the UCD-SNMP-MIB. For instance, the filesystem space array:

UCD-SNMP-MIB::dskIndex.1 = INTEGER: 1
UCD-SNMP-MIB::dskIndex.2 = INTEGER: 2
UCD-SNMP-MIB::dskPath.1 = STRING: /
UCD-SNMP-MIB::dskPath.2 = STRING: /boot
UCD-SNMP-MIB::dskDevice.1 = STRING: /dev/mapper/VolGroup00-LogVol00
UCD-SNMP-MIB::dskDevice.2 = STRING: /dev/sda1
UCD-SNMP-MIB::dskMinimum.1 = INTEGER: 1
UCD-SNMP-MIB::dskMinimum.2 = INTEGER: 1
UCD-SNMP-MIB::dskMinPercent.1 = INTEGER: -1
UCD-SNMP-MIB::dskMinPercent.2 = INTEGER: -1
UCD-SNMP-MIB::dskTotal.1 = INTEGER: 74763432
UCD-SNMP-MIB::dskTotal.2 = INTEGER: 101086
UCD-SNMP-MIB::dskAvail.1 = INTEGER: 57196340
UCD-SNMP-MIB::dskAvail.2 = INTEGER: 62978
UCD-SNMP-MIB::dskUsed.1 = INTEGER: 13769284
UCD-SNMP-MIB::dskUsed.2 = INTEGER: 32889
UCD-SNMP-MIB::dskPercent.1 = INTEGER: 19
UCD-SNMP-MIB::dskPercent.2 = INTEGER: 34
UCD-SNMP-MIB::dskPercentNode.1 = INTEGER: 4
UCD-SNMP-MIB::dskPercentNode.2 = INTEGER: 0
UCD-SNMP-MIB::dskErrorFlag.1 = INTEGER: 0
UCD-SNMP-MIB::dskErrorFlag.2 = INTEGER: 0
UCD-SNMP-MIB::dskErrorMsg.1 = STRING:
UCD-SNMP-MIB::dskErrorMsg.2 = STRING:

I understand how to convert those to numeric OIDs, but I'd like to refer to something like "dskTotal[/]" without having it hardwired to index 1 in the MIB. Can someone shed some light on how to do this?

[maxpower]

i didn't test UCD maps but with TCP it works e.g. like
SNMP OID = TCP-MIB::tcpCurrEstab
Key = tcpCurrEstab


for UCD it should be maybe UCD-SNMP-MIB::ssCpuRawIdle

[Crazy Marty]

The question is about the arrays, not necessarily just in the UCD MIB. I started the title with a different question in mind, but managed to figure that answer out while I was typing. So I moved to the next question. Sorry for the confusion.