SNMP Builder for Zabbix

[eithor]

Subsequent to playing with this over the previous week it's become progressively obvious that Zabbix outrageously needs an approach to relate an SNMP ifAlias with an interface. Prickly plants do this splendidly as of now and it would be a much-invited expansion to Zabbix

If you mean to only monitor interfaces matching a certain ifAlias, this is already possible in Zabbix with LLD and macros with regex. The standard Zabbix templates also have ifAlias shown in the latest data. Is there something else you had in mind?

[krish123]

Subsequent to playing with this over the previous week it's become progressively obvious that Zabbix outrageously needs an approach to relate an SNMP ifAlias with an interface. Prickly plants do this splendidly as of now and it would be a much-invited expansion to Zabbix geforce pour pc

[faruk@123]

We are utilizing Zabbix 4.4 with this authority PostgreSQL format, be that as it may, when we eliminate an information base from our observed worker, the accompanying things are as yet checked:

This fixes my concern with having the option to stack the HP mibs yet I'm not ready to really pull any information with any of the HP mibs. I additionally took a stab at stacking up Fortinet mibs for Fortigate firewalls and I'm not ready to get any information utilizing those either. When you attempted the HP mibs, did you really test them on any HP gadgets by some coincidence? For instance, in the event that I load up the HP-MEMPROC-MIB, I get nothing returned for anything HP explicit. Not certain in case I'm accomplishing something incorrectly but rather I've attempted each conceivable choice under the HP explicit areas. telecharger flstudio

[acognard]

Hello, Installed in 4.4 and works OK, following the page (https://github.com/mickvav/snmpbuilder) instructions

regards

Hello all,
on my zabbix server 4.4, it is ko

"Cannot find module (SNMPv2-SMI): At line 6 in /usr/share/zabbix/snmp_builder/mibs/WWW-MIB mib Cannot find module (SNMPv2-SMI): At line 6 in /usr/share/zabbix/snmp_builder/mibs/WWW-MIB.mib"

Any idea ?
Tks in advance.

[acognard]

hi all,
this is my first need, newbie with zabbix.

i get the error below

# echo $MIBDIRS
/usr/share/snmp/mibs
# ls -l /usr/share/snmp/mibs
total 244
-rw-r--r-- 1 root root 245492 mai    4  2013 Hestia-France-SNMP.MIB
drwxr-xr-x 2 root root   4096 avril  6 12:58 old
# snmptranslate -Ts -M /usr/share/zabbix/snmp_builder/mibs -m /usr/share/snmp/mibs
Failed to parse MIB file /usr/share/snmp/mibs

Begin of file

Hestia-France-MIB DEFINITIONS ::= BEGIN


IMPORTS
    enterprises, IpAddress, Counter, TimeTicks
        FROM RFC1155-SMI
    OBJECT-TYPE  
        FROM  RFC-1212-MIB   -- SNMPv2-SMI
    DisplayString
        FROM RFC1213-MIB;


------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
-- Declaration du module IDENTITY. Indique quelques informations generales concernant l'entreprise
        hestiafranceidentity MODULE-IDENTITY                       
            LAST-UPDATED "201004201030Z"               -- derniere mise a jour de la MIB 20/04/2010 10h30    
            ORGANIZATION
                "Hestia-France SAS"                 -- noms de l'organisation responsable de cette MIB
            CONTACT-INFO

i googled many forum about this issue, but without any answer in my case.
Hope someone can help me.

[jvalenzuela]

Hello there ccandido, did you used the same instructions that are on the readme on github? or did you modify anything to get it working. I want to install the builder too so i just want to know if you made any changes beforehand.

Thanks.

Regards.

Hello, Installed in 4.4 and works OK, following the page (https://github.com/mickvav/snmpbuilder) instructions

regards

[Hruiz_Arsnet]

Hi all, I tried it ( https://github.com/mickvav/snmpbuilder ) with Zabbix 4.0 and it works!

Hello there ccandido, did you used the same instructions that are on the readme on github? or did you modify anything to get it working. I want to install the builder too so i just want to know if you made any changes beforehand.

Thanks.

Regards.

[ccandido]

Hi all, I tried it ( https://github.com/mickvav/snmpbuilder ) with Zabbix 4.0 and it works!

[gospodin.horoshiy]

Hi, folks, have anyone tried this fork that is ported to Zabbix 3.2?

https://github.com/mickvav/snmpbuilder

[vlam]

Hi all, If we have different ports that is used for our SNMP so ranging from 4000 - 5000 is it possible to specify or change the port that the builder looks at when you are connecting to it

Thanks

[louis-m]

same here with 3.2. Screen is up but nothing being populated

[dave_it]

Hi!

I've added SNMP Builder to my zabbix following the instruction: https://www.zabbix.com/forum/showthread.php?t=58062

Builder appeared in my zabbix but I can't see any OID Tree

[Alfista]

This works as a GUI alternative.
https://github.com/cavaliercoder/mib2zabbix

Thanks I will try it :-)

[syndeysider]

This works as a GUI alternative.

https://github.com/cavaliercoder/mib2zabbix

[toine7m]

Hope too :/