Unexpected notification behaviour after Maintenance

[arli]

After upgrading from 1.8.3 to 1.8.4 I started to get recovery notifications at the end of the maintenance window about hosts that went through maintenance and recovered inside that window.

I reviewed the release notes and found this:
[DEV-433] added generation events after maintenance period if trigger status changed during this period
I don't know where to find more information about that... since I can't access DEV tasks in Jira.
My question is, what should I do to not get those kind of notifications? Because in my perspective, there isn't nothing wrong with those triggers.

I'm using Normal event generation .

[arli]

I downgraded zabbix to 1.8.3 at the moment, to avoid unnessesary notifications.
But now... all of you out the, who are also taking advantage of maintenance periods and are upgraded to latest version. Don't you have such problem?

[mjsr]

Late (ok, really late) answer but, on 1.8.4, still suffering the same "issue".

The changelog on 1.8.5 doesn't seem to handle that.

Commented that on another thread: http://www.zabbix.com/forum/showthre...4385#post84385

Cheers,

[igor]

You can get rid of these notifications if you will perform the following changes:

1. In the configuration of your action from "Action conditions" you should remove option "trigger value = "OK"" and leave option "Trigger value = "PROBLEM"" and also leave option "Maintenance status not in "maintenance"";

2. Turn on (enable) recovery messages in this action;

[mjsr]

Hello,

Some coworkers detected the issue in the source code of timer.c (or time.c).

That should be integrated in Zabbix 1.8.6.

[Andreas Bollhalder]

Is this problem fixed ?

I have upgraded Zabbix from 1.8.2 to 1.8.6 and got this problem too. So it seems that it isn't fixed in 1.8.6.

In the release notes of 1.8.7, I read that the default conditions of the actions are "Trigger value = Problem" and "Not in maintenance" . Does it work if I add "Trigger value = Problem" (which I currently don't use) or must I downgrade to 1.8.3, which seems the last version without the problem ?

Edit: I don't like to configure the "Recovery Message", because I worked fine before. But if there is no other way ...

Thanks in advance.

Andreas