Intresting no error :)

[Vagishius]

I have two network betwen one router.

192.168.0.0 net and 192.168.32.0 net

router IP adreses Eth1 192.168.0.254 and Eth2 192.168.0.239

from 192.168.0.254 : telnet 192.168.32.1 10050 OK
Trying 192.168.33.2...
Connected to 192.168.33.2.
Escape character is '^]'.
Connection closed by foreign host.

from 192.168.32.1 : telnet 192.168.0.254 10051 OK

log from 192.168.32.1
[17-May-2006 10:18:40] Active checks [Cannot connect to [192.168.0.254:10051] [No error]]
[17-May-2006 10:20:01] Active checks [Cannot connect to [192.168.0.254:10051] [No error]]

from zabbix
Got empty string from [ComputerName] IP [192.168.32.1] Parameter [agent[accepted_requests]]

have some ideas ?

[erisan500]

post your agent.conf file, most probably you're missing the Hostname parameter.


EriSan

[Vagishius]

# This is config file for zabbix_agentd
# To get more information about ZABBIX, go http://www.zabbix.com

############ GENERAL PARAMETERS #################

# List of comma delimited IP addresses (or hostnames) of ZABBIX Servers.
# No spaces allowed. First entry is used for sending active checks.
# Note that hostnames must resolve hostname - IP address and
# IP address - hostname.

Server=192.168.0.254

# Server port for sending active checks

ServerPort=10051

# Unique hostname. Required for active checks.

Hostname= HERE ?

# Listen port. Default is 10050

ListenPort=10050

# IP address to bind agent
# If missing, bind to all available IPs

ListenIP=127.0.0.1

# Number of pre-forked instances of zabbix_agentd.
# Default value is 5
# This parameter must be between 1 and 16

StartAgents=5

# How often refresh list of active checks. 2 minutes by default.

#RefreshActiveChecks=120

# Disable active checks. The agent will work in passive mode listening server.

#DisableActive=1

# Specifies debug level
# 0 - debug is not created
# 1 - critical information
# 2 - error information
# 3 - warnings (default)
# 4 - for debugging (produces lots of information)

DebugLevel=3

# Name of PID file

#PidFile=C:\/zabbix_agentd.pid

# Name of log file.
# If not set, syslog will be used

LogFile=C:\/zabbix_agentd.log

# Spend no more than Timeout seconds on processing
# Must be between 1 and 30

Timeout=3

##### Experimental options. Use with care ! #####

# Get rid of sockets in TIME_WAIT state
# This will set socket option SO_LINGER

# NoTimeWait=1

##### End of experimental options

####### USER-DEFINED MONITORED PARAMETERS #######
# Format: "UserParameter='key','shell command'"
# Note that shell command must not return empty string or EOL only

UserParameter=mysql.version,mysql -V