Windows Network Monitoring on 1.4.1 [m|ZBX_NOTSUPPORTED]

[schiinke]

Hi all,

I don't know what I have to do anymore, because I've tried everything the forum has concerning this problem!

See below my config file:

############ GENERAL PARAMETERS #################

# List of comma delimited IP addresses of ZABBIX servers. No spaces allowed.
# First IP is used for sending active checks.

Server=172.31.10.137

# Server port for sending active checks

#ServerPort=10051

# Unique hostname. Required for active checks.

Hostname=localhost

# Listen port. Default is 10050

#ListenPort=10050

# IP address to bind agent
# If missing, bind to all available IPs

#ListenIP=127.0.0.1

# Number of pre-forked instances of horus_agentd.
# Default value is 5
# This parameter must be between 1 and 16

StartAgents=5

# How often refresh list of active checks. 2 minutes by default.

#RefreshActiveChecks=120

# Specifies debug level
# 0 - debug is not created
# 1 - critical information
# 2 - error information
# 3 - warnings (default)
# 4 - for debugging (produces lots of information)

DebugLevel=3

# Name of PID file

PidFile=c:\zabbix\zabbix_agentd.pid

# Name of log file.
# If not set, syslog will be used

LogFile=c:\zabbix\/zabbix_agentd.log

# Spend no more than Timeout seconds on processing
# Must be between 1 and 30

Timeout=3

##### Experimental options. Use with care ! #####

# Get rid of sockets in TIME_WAIT state
# This will set socket option SO_LINGER

# NoTimeWait=1

##### End of experimental options

####### USER-DEFINED MONITORED PARAMETERS #######
# Format: UserParameter=<key>,<shell command>
# Note that shell command must not return empty string or EOL only

#UserParameter=system[test],who|wc -l

### Set of parameter for monitoring MySQL server (v3.23.42 and later)
### Change -u<username> and add -p<password> if required

#UserParameter=mysql[ping],mysqladmin -uroot ping|grep alive|wc -l
#UserParameter=mysql[uptime],mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"
#UserParameter=mysql[threads],mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"
#UserParameter=mysql[questions],mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"
#UserParameter=mysql[slowqueries],mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"
#UserParameter=mysql[qps],mysqladmin -uroot status|cut -f9 -d":"
#UserParameter=version[mysql],mysql -V

PerfCounter=NetIn,"\Interface de rede(3Com EtherLink XL 10_100 PCI For Complete PC Management NIC [3C905C-TX] - Miniporta do agendador de pacotes)\Bytes recebidos/s",60
PerfCounter=NetOut,"\Interface de rede(3Com EtherLink XL 10_100 PCI For Complete PC Management NIC [3C905C-TX] - Miniporta do agendador de pacotes)\Bytes enviados/s",60

Below follows the zabbix_agentd test result:

C:\zabbix>zabbix_agentd.exe -c c:\zabbix\zabbix_agentd.conf -t NetIn,"\Interface de rede(3Com EtherLink XL 10_100 PCI For Complete PC Management NIC [3C905C-TX] - Miniporta do agendador de pacotes)\By
tes recebidos/s",60
NetIn,\Interface de rede(3Com EtherLink XL 10_100 PCI For Complete PC Management NIC [m|ZBX_NOTSUPPORTED]

It's drives me CRAZY!!!

Can anybody help me?

[bobrivers]

PerfCounter

Hi,

I'm not able to make it work also. But, I can see that you are doing the tests wrong...

Try to test it using:

 zabbix_agentd.exe -t perf_counter["\Interface de rede(3Com EtherLink XL 10_100 PCI For Complete PC Management NIC [3C905C-TX] - Miniporta do agendador de pacotes)\By
tes recebidos/s"]

Doing this way, you'll be able to see if the counter name isn't misspelled or something else.

But this is the only help that I can provide. I'm stuck if PerfCounter configuration (see it here: http://www.zabbix.com/forum/showthread.php?t=7036

[schiinke]

Hi Bob,

I did it as you asked me to do, but without success...

Thanks for your help.

[schiinke]

Could anybody help me?

[eran]

Try using the agent from version 1.3.8 - It works fine for me with server 1.4.1

Eran

[schiinke]

Try using the agent from version 1.3.8 - It works fine for me with server 1.4.1

Eran

Thanks Eran, I did it, but I had the same problem as before, I can't get any information from NIC's...