Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/zyxel_snmp/zyxel_aam1212-51_snmp

ZYXEL AAM1212-51 IES-612 SNMP

Overview

For Zabbix version: 6.4 and higher
http://origin-eu.zyxel.com/products_services/ies_1248_51v.shtml?t=p

This template was tested on:

  • ZYXEL AAM1212-51 / IES-612

Setup

See Zabbix template operation for basic instructions.

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name Description Default
{$SNMP.TIMEOUT}

The time interval for SNMP agent availability trigger expression.

5m
{$ZYXEL.ADSL.ATN.MAX}

Type the maximum signal attenuation

40
{$ZYXEL.ADSL.SNR.MIN}

Type the minimum signal to noise margin (0-31 dB)

8
{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}

Triggers will be created only for interfaces whose description contains the value of this macro

CHANGE_IF_NEEDED
{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}

Filter of discoverable link types.

.*
{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}

Filter to exclude discovered by link types.

2

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
ADSL interface discovery

-

SNMP zyxel.aam1212.net.adsl.discovery

Filter:

AND

- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX {$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}

- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX {$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}

- {#ZYXEL.IF.NAME} MATCHES_REGEX adsl

Overrides:

Don't create triggers for matching interface
- {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX {$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}
- TRIGGER_PROTOTYPE REGEXP .* - NO_DISCOVER

Ethernet interface discovery

-

SNMP zyxel.aam1212.net.if.discovery

Filter:

AND

- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX {$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}

- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX {$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}

- {#ZYXEL.IF.NAME} MATCHES_REGEX enet

Overrides:

Don't create triggers for matching interface
- {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX {$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}
- TRIGGER_PROTOTYPE REGEXP .* - NO_DISCOVER

Temperature discovery

An entry in tempTable.

SNMP zyxel.aam1212.temp.discovery
Voltage discovery

An entry in voltageTable.

SNMP zyxel.aam1212.volt.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Items collected

Group Name Description Type Key and additional info
Inventory ZYXEL AAM1212-51 / IES-612: Hardware model name

MIB: RFC1213-MIB

A textual description of the entity. This value

should include the full name and version

identification of the system's hardware type,

software operating-system, and networking

software. It is mandatory that this only contain

printable ASCII characters.

SNMP zyxel.aam1212.model

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Inventory ZYXEL AAM1212-51 / IES-612: Contact

MIB: RFC1213-MIB

The textual identification of the contact person

for this managed node, together with information

on how to contact this person.

SNMP zyxel.aam1212.contact

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Inventory ZYXEL AAM1212-51 / IES-612: Host name

MIB: RFC1213-MIB

An administratively-assigned name for this

managed node. By convention, this is the node's

fully-qualified domain name.

SNMP zyxel.aam1212.name

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Inventory ZYXEL AAM1212-51 / IES-612: Location

MIB: RFC1213-MIB

The physical location of this node (e.g.,

telephone closet, 3rd floor').</p> |SNMP |zyxel.aam1212.location<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:6h`

Inventory ZYXEL AAM1212-51 / IES-612: MAC address

MIB: IF-MIB

The interface's address at the protocol layer

immediately below' the network layer in the</p><p>protocol stack. For interfaces which do not have</p><p>such an address (e.g., a serial line), this object</p><p>should contain an octet string of zero length.</p> |SNMP |zyxel.aam1212.mac<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:6h`

Inventory ZYXEL AAM1212-51 / IES-612: ZyNOS F/W Version

MIB: ZYXEL-IESCOMMON-MIB

SNMP zyxel.aam1212.fwversion

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Inventory ZYXEL AAM1212-51 / IES-612: Hardware serial number

MIB: ZYXEL-IESCOMMON-MIB

Serial number

SNMP zyxel.aam1212.serialnumber

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#ZYXEL.IF.NAME}: Interface name

MIB: IF-MIB

A textual string containing information about the interface

SNMP zyxel.aam1212.net.if.name[{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#ZYXEL.IF.NAME}: Operational status

MIB: IF-MIB

The current operational state of the interface.

The testing(3) state indicates that no operational

packets can be passed.

SNMP zyxel.aam1212.net.if.operstatus[{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#ZYXEL.IF.NAME}: Administrative status

MIB: IF-MIB

The desired state of the interface. The

testing(3) state indicates that no operational

packets can be passed.

SNMP zyxel.aam1212.net.if.adminstatus[{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#ZYXEL.IF.NAME}: Incoming traffic

MIB: IF-MIB

The total number of octets received on the interface,

including framing characters.

SNMP zyxel.aam1212.net.if.in.traffic[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#ZYXEL.IF.NAME}: Outgoing traffic

MIB: IF-MIB

The total number of octets transmitted out of the

interface, including framing characters. This object is a

64-bit version of ifOutOctets.

SNMP zyxel.aam1212.net.if.out.traffic[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: Interface name

MIB: IF-MIB

A textual string containing information about the interface

SNMP zyxel.aam1212.net.adsl.name[{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: Operational status

MIB: IF-MIB

The current operational state of the interface.

The testing(3) state indicates that no operational

packets can be passed.

SNMP zyxel.aam1212.net.adsl.operstatus[{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: Administrative status

MIB: IF-MIB

The desired state of the interface. The

testing(3) state indicates that no operational

packets can be passed.

SNMP zyxel.aam1212.net.adsl.adminstatus[{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: Incoming traffic

MIB: IF-MIB

The total number of octets received on the interface,

including framing characters.

SNMP zyxel.aam1212.net.adsl.in.traffic[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: Outgoing traffic

MIB: IF-MIB

The total number of octets transmitted out of the

interface, including framing characters. This object is a

64-bit version of ifOutOctets.

SNMP zyxel.aam1212.net.adsl.out.traffic[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: ATUC noise margin

MIB: ADSL-LINE-MIB

Noise Margin as seen by this ATU with respect to its

received signal in tenth dB.

The Info Atuc fields show data acquired from the ATUC (ADSL Termination Unit – Central), in this case ZYXEL AAM1212-51 / IES-612, during negotiation/provisioning message interchanges.

SNMP zyxel.aam1212.net.adsl.atuc.snrmgn[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 0.1

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: ATUC attenuation

MIB: ADSL-LINE-MIB

Measured difference in the total power transmitted by

the peer ATU and the total power received by this ATU.

The Info Atuc fields show data acquired from the ATUC (ADSL Termination Unit – Central), in this case ZYXEL AAM1212-51 / IES-612, during negotiation/provisioning message interchanges.

SNMP zyxel.aam1212.net.adsl.atuc.atn[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 0.1

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: ATUC output power

MIB: ADSL-LINE-MIB

Measured total output power transmitted by this ATU.

The Info Atuc fields show data acquired from the ATUC (ADSL Termination Unit – Central), in this case ZYXEL AAM1212-51 / IES-612, during negotiation/provisioning message interchanges.

SNMP zyxel.aam1212.net.adsl.atuc.outpwr[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 0.1

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: ATUR noise margin

MIB: ADSL-LINE-MIB

Noise Margin as seen by this ATU with respect to its

received signal in tenth dB.

The Info Atur fields show data acquired from the ATUR (ADSL Termination Unit – Remote), in this case the subscriber's ADSL modem or router, during negotiation/provisioning message interchanges.

SNMP zyxel.aam1212.net.adsl.atur.snrmgn[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 0.1

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: ATUR attenuation

MIB: ADSL-LINE-MIB

Measured difference in the total power transmitted by

the peer ATU and the total power received by this ATU.

The Info Atur fields show data acquired from the ATUR (ADSL Termination Unit – Remote), in this case the subscriber's ADSL modem or router, during negotiation/provisioning message interchanges.

SNMP zyxel.aam1212.net.adsl.atur.atn[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 0.1

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Network interfaces ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: ATUR output power

MIB: ADSL-LINE-MIB

Measured total output power transmitted by this ATU.

The Info Atur fields show data acquired from the ATUR (ADSL Termination Unit – Remote), in this case the subscriber's ADSL modem or router, during negotiation/provisioning message interchanges.

SNMP zyxel.aam1212.net.adsl.atur.outpwr[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 0.1

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Power supply ZYXEL AAM1212-51 / IES-612: Nominal "{#ZYXEL.VOLT.NOMINAL}"

MIB: ZYXEL-IESCOMMON-MIB

The current voltage reading.

SNMP zyxel.aam1212.volt[{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 0.001

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Status ZYXEL AAM1212-51 / IES-612: SNMP agent availability

-

INTERNAL zabbix[host,snmp,available]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Status ZYXEL AAM1212-51 / IES-612: Uptime (network)

MIB: RFC1213-MIB

The time (in hundredths of a second) since the

network management portion of the system was last

re-initialized.

SNMP zyxel.aam1212.net.uptime

Preprocessing:

- MULTIPLIER: 0.01

Status ZYXEL AAM1212-51 / IES-612: Uptime (hardware)

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized.

Note that this is different from sysUpTime in the SNMPv2-MIB

[RFC1907] because sysUpTime is the uptime of the

network management portion of the system.

SNMP zyxel.aam1212.hw.uptime

Preprocessing:

- CHECK_NOT_SUPPORTED

⛔️ON_FAIL: CUSTOM_VALUE -> 0

- MULTIPLIER: 0.01

Status ZYXEL AAM1212-51 / IES-612: Alarm status

MIB: ZYXEL-IESCOMMON-MIB

This variable indicates the alarm status of the module.

It is a bit map represented a sum, therefore, it can represent

multiple defects simultaneously. The moduleNoDefect should be set

if and only if no other flag is set.

The various bit positions are:

1 moduleNoDefect

2 moduleOverHeat

3 moduleFanRpmLow

4 moduleVoltageLow

5 moduleThermalSensorFailure

6 modulePullOut

7 powerDC48VAFailure

8 powerDC48VBFailure

9 extAlarmInputTrigger

10 moduleDown

11 mscSwitchOverOK

12 networkTopologyChange

13 macSpoof

14 cpuHigh

15 memoryUsageHigh

16 packetBufferUsageHigh

17 loopguardOccurence

SNMP zyxel.aam1212.slot.alarm

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Temperature ZYXEL AAM1212-51 / IES-612: Temperature "{#ZYXEL.TEMP.ID}"

MIB: ZYXEL-IESCOMMON-MIB

The current temperature measured at this sensor

SNMP zyxel.aam1212.temp[{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

Triggers

Name Description Expression Severity Dependencies and additional info
ZYXEL AAM1212-51 / IES-612: Template does not match hardware

This template is for Zyxel AAM1212-51 / IES-612, but connected to {ITEM.VALUE}

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.model)<>"AAM1212-51 / IES-612" INFO
ZYXEL AAM1212-51 / IES-612: Firmware has changed

Firmware version has changed. Ack to close

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.fwversion,#1)<>last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.fwversion,#2) and length(last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.fwversion))>0 INFO

Manual close: YES

ZYXEL AAM1212-51 / IES-612: Device has been replaced

Device serial number has changed. Ack to close

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.serialnumber,#1)<>last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.serialnumber,#2) and length(last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.serialnumber))>0 INFO

Manual close: YES

ZYXEL AAM1212-51 / IES-612: Port {#ZYXEL.IF.NAME}: Link down

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.if.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.if.operstatus[{#SNMPINDEX}],#2)

Recovery expression:

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.if.operstatus[{#SNMPINDEX}])<>2
AVERAGE

Manual close: YES

ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX}: Link down

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.operstatus[{#SNMPINDEX}],#2)

Recovery expression:

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.operstatus[{#SNMPINDEX}])<>2
AVERAGE

Manual close: YES

ZYXEL AAM1212-51 / IES-612: Low the DSL line noise margins in Port {#SNMPINDEX}

Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed

min(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN} WARNING
ZYXEL AAM1212-51 / IES-612: High the DSL line attenuation in Port {#SNMPINDEX}

The reductions in amplitude of the downstream and upstream DSL signals.

min(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX} WARNING
ZYXEL AAM1212-51 / IES-612: Low the DSL line noise margins in Port {#SNMPINDEX}

Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed

min(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN} WARNING
ZYXEL AAM1212-51 / IES-612: High the DSL line attenuation in Port {#SNMPINDEX}

The reductions in amplitude of the downstream and upstream DSL signals.

min(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX} WARNING
ZYXEL AAM1212-51 / IES-612: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state

Please check the power supply

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW} AVERAGE
ZYXEL AAM1212-51 / IES-612: No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

max(/ZYXEL AAM1212-51 IES-612 SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 WARNING
ZYXEL AAM1212-51 / IES-612: Host has been restarted

Uptime is less than 10 minutes.

(last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.hw.uptime)>0 and last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.hw.uptime)<10m) or (last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.hw.uptime)=0 and last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.net.uptime)<10m) INFO

Manual close: YES

ZYXEL AAM1212-51 / IES-612: Port {#SNMPINDEX} alarm

The slot reported an error.

find(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.slot.alarm,,"like","moduleNoDefect")=0 AVERAGE
ZYXEL AAM1212-51 / IES-612: Temperature {#ZYXEL.TEMP.ID} is in critical state

Please check the temperature

last(/ZYXEL AAM1212-51 IES-612 SNMP/zyxel.aam1212.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH} AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template or ask for help with it at ZABBIX forums.

Known Issues

  • Description: Incorrect handling of SNMP bulk requests. Disable the use of bulk requests in the SNMP interface settings.
    • Version: all versions firmware
    • Device: ZYXEL AAM1212-51 / IES-612

Articles and documentation

+ Propose new article

Nenašli jste integraci, kterou potřebujete?