TP-Link WiFi Router Archer VR900 & WiFi Extender WA901

[Gokiwi64]

So both of these devices have snmp 1/2c functionality , and work with the built in TP-Link template however they misreport interface speeds and miss out a couple of interfaces - snmpwalk shows these interface speeds and shows up the missing interfaces.

How do I add them in to either the existing TP-Link template or create a new one.

[Hamardaban]

The interfaces of the device are detected by the LLD when it has filtered out the junk. You can change the filter as you need or remove it altogether.

https://www.zabbix.com/documentation/current/manual/discovery/low_level_discovery

[Gokiwi64]

Hi, Many thanks for that - Unfortunately all way above my ability/knowledge level.I'm just a simple router/switch engineer not a developer/rocket scientist.

[Gokiwi64]

For reference this is what an snmp walk finds/reports

Name/OID: ifIndex.2; Value (Integer): 2
Name/OID: ifIndex.4; Value (Integer): 4
Name/OID: ifIndex.8; Value (Integer): 8
Name/OID: ifIndex.16; Value (Integer): 16
Name/OID: ifIndex.21; Value (Integer): 21
Name/OID: ifIndex.23; Value (Integer): 23

Name/OID: ifDescr.2; Value (OctetString): ifb0
Name/OID: ifDescr.4; Value (OctetString): gre0
Name/OID: ifDescr.8; Value (OctetString): bcmsw
Name/OID: ifDescr.16; Value (OctetString): br0
Name/OID: ifDescr.21; Value (OctetString): tun0
Name/OID: ifDescr.23; Value (OctetString): ppp1

Name/OID: ifType.2; Value (Integer): ethernetCsmacd (6)
Name/OID: ifType.4; Value (Integer): ethernetCsmacd (6)
Name/OID: ifType.8; Value (Integer): ethernetCsmacd (6)
Name/OID: ifType.16; Value (Integer): ethernetCsmacd (6)
Name/OID: ifType.21; Value (Integer): ethernetCsmacd (6)
Name/OID: ifType.23; Value (Integer): ppp (23)

Name/OID: ifMtu.2; Value (Integer): 1500
Name/OID: ifMtu.4; Value (Integer): 1476
Name/OID: ifMtu.8; Value (Integer): 1500
Name/OID: ifMtu.16; Value (Integer): 1500
Name/OID: ifMtu.21; Value (Integer): 1500
Name/OID: ifMtu.23; Value (Integer): 1480

Name/OID: ifSpeed.2; Value (Gauge): 100000000
Name/OID: ifSpeed.4; Value (Gauge): 100000000
Name/OID: ifSpeed.8; Value (Gauge): 100000000
Name/OID: ifSpeed.16; Value (Gauge): 100000000
Name/OID: ifSpeed.21; Value (Gauge): 100000000
Name/OID: ifSpeed.23; Value (Gauge): 0

I dont know how to show what zabbix reports easily unfortunately