runts, input errors, CRC on cisco 2660

[MrKen]

Not too sure about this one, but you can try

1.3.6.1.4.1.2620.500.9002.1.2.{peerIP}.0
1.3.6.1.4.1.2620.500.9002.1.3.{peerIP}.0
1.3.6.1.4.1.2620.500.9002.1.4.{peerIP}.0

returned values:
3 = active
4 = destroy
129 = idle
130 = phase1
131 = down
132 = init

[ghbage]

this is my result:

snmpwalk -v 2c -c host 192.168.1.3 1.3.6.1.4.1.2620.500.9002.1.2
SNMPv2-SMI::enterprises.2620.500.9002.1.2.194.98.7.98.0 = STRING: "FW"

#snmpwalk -v 2c -c host 192.168.1.3 1.3.6.1.4.1.2620.500.9002.1.2
SNMPv2-SMI::enterprises.2620.500.9002.1.2.194.98.7.98.0 = STRING: "FW"

# snmpwalk -v 2c -c host 192.168.1.3 1.3.6.1.4.1.2620.500.9002.1.3
SNMPv2-SMI::enterprises.2620.500.9002.1.3.194.98.7.98.0 = INTEGER: 3

# snmpwalk -v 2c -c host 192.168.1.3 1.3.6.1.4.1.2620.500.9002.1.4
SNMPv2-SMI::enterprises.2620.500.9002.1.4.194.98.7.98.0 = STRING: "VPN_SERVICES"

[MrKen]

I don't use Checkpoint so I really can't say for sure, but my guess is that the name of the tunnel is either FW or VPN_SERVICES, and the status is Active (3).