Cisco-2851

[analaura]

Alguien me podría ayudar para hacer o conseguir un template para un Cisco-2851

O alguna idea de como hacer un template, no estoy entendiendo

Gracias

Someone could help me to make or get a template for a Cisco-2851

Or any idea how to make a template, I'm not understanding: mad:

thanks

[johnw230873]

Best to start off with a template already created for a cisco.
How much do you know about SNMP and about cisco IOS??

First we need to set up a community on the cisco switch, this is like setting up a remote login and access for devices that want to use SNMP
e.g. let user public have read acccess to SNMP

On the switch/router type in
conf t
snmp-server community public R


Next you need to know what your mib if index's are on your cisco switch for this type in
show snmp mib ifmib ifindex

This will give you a list

Last, with the template you are using modliy the snmp OID so the last digits repersent your ifindex

e.g. lets say you want to monitor FastEthernet0/1-IN and zabbix says the the OID is .1.3.6.1.2.1.2.2.1.10.10001 but your cisco switch says the ifindex for FastEthernet0/1 is 11111 then modifly .1.3.6.1.2.1.2.2.1.10.10001 to .1.3.6.1.2.1.2.2.1.10.11111

You can have more than one community entry so you might also want to add
snmp-server community itws R

as I think some templates use that as well (or change the template)

Hope this helps

[analaura]

Thanks for the reply
Consultation and says I

GigabitEthernet0/0: Ifindex = 1
Loopback0: Ifindex = 22
Null0: Ifindex = 20
VoIP-Null0: Ifindex = 19
FastEthernet1/0: Ifindex = 3
Vlan1: Ifindex = 21
GigabitEthernet0/1: Ifindex = 2
FastEthernet1/1: Ifindex = 4
FastEthernet1/10: Ifindex = 13
Vlan101: Ifindex = 23
FastEthernet1/2: Ifindex = 5
Vlan301: Ifindex = 25
FastEthernet1/11: Ifindex = 14
FastEthernet1/3: Ifindex = 6
Vlan102: Ifindex = 24
FastEthernet1/4: Ifindex = 7
FastEthernet1/12: Ifindex = 15
FastEthernet1/5: Ifindex = 8
FastEthernet1/13: Ifindex = 16
FastEthernet1/6: Ifindex = 9
FastEthernet1/7: Ifindex = 10
FastEthernet1/14: Ifindex = 17
FastEthernet1/8: Ifindex = 11
FastEthernet1/9: Ifindex = 12
FastEthernet1/15: Ifindex = 18

For example I want to monitor FastEthernet1 / 4 is 7 ok?

I look other cisco template and I can not realize as follow.
Which I recommend you to use and modify default?

Best Wishes

[johnw230873]

which cisco template are you looking at?

[jsantiago]

snmp mib

Hi guys,

Sorry for crashing into your thread, but since both of you already worked on monitoring cisco switches using zabbix, I may as well as this question.

Do I need to download, the specific MIB and save it on the zabbix server for me to monitor a specific OID? Let's say I want to monitor object: cpsGlobalMaxSecureAddress OBJECT-TYPE, do I have to download the MIB where it came from? Which is in this instance CISCO-PORT-SECURITY-MIB.my?

ftp://ftp.cisco.com/pub/mibs/v2/CISC...ECURITY-MIB.my

Hoping to hear from you guys. Thank you.