Ruckus WiFi monitorig SNMP Items not suported

[nijazse]

I emailed Ruckus and get from them MIB files for my Wireless Zone Director.
I put MIB files to /usr/share/snmp/mibs location and restart the server.
When i do snmptranslate i get the numeric form of the OID.
Zabbix reads MIB files.

Problem is, when i add item with that numeric form of OID, Zabbix displays the message that item is not supported (SNMP error: (noSuchName) There is no such variable name in this MIB.)

What is the problem here

[allexpetrov]

Hi,

show the exact MIB, the SNMPGET output for that MIB and the screenshot of an Item config.

Regards,
Alex!

[nijazse]

Here is the
SNMPGET output for that MIB and Screenshot of an Item config as PNG attachments.

MIB i get from Ruckus.
PS: I could not upload MIB file to forum because it is exceeding forum upload limit so i posted content below


RUCKUS-ZD-WLAN-MIB DEFINITIONS ::= BEGIN

IMPORTS
ruckusZDWLANModule
FROM RUCKUS-ROOT-MIB
RuckusAdminStatus,
RuckusRadioMode,
RuckusSSID,
RuckusdB,
RuckusRateLimiting
FROM RUCKUS-TC-MIB
DisplayString,
MacAddress,
RowStatus,
PhysAddress,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex,
InterfaceIndex
FROM IF-MIB
IANAifType
FROM IANAifType-MIB
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Integer32,
Unsigned32,
IpAddress
FROM SNMPv2-SMI;

ruckusZDWLANMIB MODULE-IDENTITY
LAST-UPDATED "201010150800Z"
ORGANIZATION "Ruckus Wireless, Inc."
CONTACT-INFO
"Ruckus Wireless, Inc.

Postal:
350 West Java Dr.
Sunnyvale, CA 94089
USA

EMail: [email protected]

Phone: +1-650-265-4200"
DESCRIPTION
"Ruckus ZD WLAN mib"
::= { ruckusZDWLANModule 1 }

ruckusZDWLANObjects OBJECT IDENTIFIER ::= { ruckusZDWLANMIB 1 }

ruckusZDWLANInfo OBJECT IDENTIFIER ::= { ruckusZDWLANObjects 1 }


ruckusZDWLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN table."
::= { ruckusZDWLANInfo 1 }

ruckusZDWLANEntry OBJECT-TYPE
SYNTAX RuckusZDWLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN entry."
INDEX {
ruckusZDWLANIndex }
::= { ruckusZDWLANTable 1 }

RuckusZDWLANEntry ::= SEQUENCE {
ruckusZDWLANIndex InterfaceIndex,
ruckusZDWLANSSID RuckusSSID,
ruckusZDWLANDescription DisplayString,
ruckusZDWLANAuthentication DisplayString,
ruckusZDWLANEncryption DisplayString,
ruckusZDWLANIsGuest TruthValue,
ruckusZDWLANSSIDBcastDisable TruthValue,
ruckusZDWLANVlanID INTEGER,
ruckusZDWLANRateLimitingUp OCTET STRING,
ruckusZDWLANRateLimitingDown OCTET STRING,
ruckusZDWLANTunnelWLAN TruthValue,
ruckusZDWLANNumVAP Unsigned32,
ruckusZDWLANNumSta Unsigned32,
ruckusZDWLANRxPkts Counter64,
ruckusZDWLANRxBytes Counter64,
ruckusZDWLANTxPkts Counter64,
ruckusZDWLANTxBytes Counter64,
ruckusZDWLANAssocNumSta Unsigned32,
ruckusZDWLANAuthTotal Counter64,
ruckusZDWLANAuthResp Counter64,
ruckusZDWLANAuthSuccessTotal Counter64,
ruckusZDWLANAuthFail Counter64,
ruckusZDWLANAssocTotal Counter64,
ruckusZDWLANAssocResp Counter64,
ruckusZDWLANReassocReq Counter64,
ruckusZDWLANReassocResp Counter64,
ruckusZDWLANAssocSuccess Counter64,
ruckusZDWLANAssocFail Counter64,
ruckusZDWLANAssocDenied Counter64,
ruckusZDWLANDiassocAbnormal Counter64,
ruckusZDWLANDiassocCapacity Counter64,
ruckusZDWLANDiassocLeave Counter64,
ruckusZDWLANDiassocMisc Counter64,
ruckusZDWLANRxByteRate Unsigned32,
ruckusZDWLANTxByteRate Unsigned32,
ruckusZDWLANRxDataFrameOnLan Counter64,
ruckusZDWLANRxByteOnLan Counter64,
ruckusZDWLANTxByteOnLan Counter64,
ruckusZDWLANDownDropFrame Counter64,
ruckusZDWLANDownRetxFrame Counter64,
ruckusZDWLANDownTotalFrame Counter64,
ruckusZDWLANDownTotalErrFrame Counter64,
ruckusZDWLANUpTotalFrame Counter64,
ruckusZDWLANUpDropFrame Counter64,
ruckusZDWLANUpRetxFrame Counter64,
ruckusZDWLANNAME RuckusSSID
}

ruckusZDWLANIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index."
::= { ruckusZDWLANEntry 200 }

ruckusZDWLANSSID OBJECT-TYPE
SYNTAX RuckusSSID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID."
::= { ruckusZDWLANEntry 1 }

ruckusZDWLANDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WLAN description."
::= { ruckusZDWLANEntry 2 }

ruckusZDWLANAuthentication OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication method."
::= { ruckusZDWLANEntry 3 }

ruckusZDWLANEncryption OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption method."
::= { ruckusZDWLANEntry 4 }

ruckusZDWLANIsGuest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This WLAN is for guest access."
::= { ruckusZDWLANEntry 5 }

ruckusZDWLANSSIDBcastDisable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hide SSID."
::= { ruckusZDWLANEntry 6 }

ruckusZDWLANVlanID OBJECT-TYPE
SYNTAX INTEGER ( 1..4094 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged."
::= { ruckusZDWLANEntry 7 }

ruckusZDWLANRateLimitingUp OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate limiting of uplink."
::= { ruckusZDWLANEntry 8 }

ruckusZDWLANRateLimitingDown OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate limiting of downlink."
::= { ruckusZDWLANEntry 9 }

ruckusZDWLANTunnelWLAN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tunnel WLAN."
::= { ruckusZDWLANEntry 10 }

ruckusZDWLANNumVAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of APs."
::= { ruckusZDWLANEntry 11 }

ruckusZDWLANNumSta OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of client devices."
::= { ruckusZDWLANEntry 12 }

ruckusZDWLANRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received packets."
::= { ruckusZDWLANEntry 13 }

ruckusZDWLANRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received bytes."
::= { ruckusZDWLANEntry 14 }

ruckusZDWLANTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted packets."
::= { ruckusZDWLANEntry 15 }

ruckusZDWLANTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted bytes."
::= { ruckusZDWLANEntry 16 }

ruckusZDWLANAssocNumSta OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of associate client devices, include authorize and unauthorize."
::= { ruckusZDWLANEntry 20 }

ruckusZDWLANAuthTotal OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accumulated total number of attempt to authenticate by wireless terminals on this WLAN,
or Authentication request."
::= { ruckusZDWLANEntry 26 }

ruckusZDWLANAuthResp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication response."
::= { ruckusZDWLANEntry 27 }

ruckusZDWLANAuthSuccessTotal OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accumulated total number of success out of Wireless authentication attempts."
::= { ruckusZDWLANEntry 28 }

ruckusZDWLANAuthFail OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication fail."
::= { ruckusZDWLANEntry 29 }

ruckusZDWLANAssocTotal OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accumulated total number of access of wireless terminal on this WLAN,
or Association request."
::= { ruckusZDWLANEntry 30 }

ruckusZDWLANAssocResp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association response."
::= { ruckusZDWLANEntry 31 }

ruckusZDWLANReassocReq OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reassociation request."
::= { ruckusZDWLANEntry 32 }

ruckusZDWLANReassocResp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reassociation response."
::= { ruckusZDWLANEntry 33 }

ruckusZDWLANAssocSuccess OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association success."
::= { ruckusZDWLANEntry 34 }

ruckusZDWLANAssocFail OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association fail."
::= { ruckusZDWLANEntry 35 }

ruckusZDWLANAssocDenied OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association denied."
::= { ruckusZDWLANEntry 36 }

ruckusZDWLANDiassocAbnormal OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to abnormal causes."
::= { ruckusZDWLANEntry 37 }

ruckusZDWLANDiassocCapacity OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to device capacity."
::= { ruckusZDWLANEntry 38 }

ruckusZDWLANDiassocLeave OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to client leave."
::= { ruckusZDWLANEntry 39 }

ruckusZDWLANDiassocMisc OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to other reasons."
::= { ruckusZDWLANEntry 40 }

ruckusZDWLANRxByteRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received rate byte/s in last 5 minutes ."
::= { ruckusZDWLANEntry 41 }

ruckusZDWLANTxByteRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted rate byte/s in last 5 minutes ."
::= { ruckusZDWLANEntry 42 }

ruckusZDWLANRxDataFrameOnLan OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Data Frame Number on Lan interface ."
::= { ruckusZDWLANEntry 43 }

ruckusZDWLANRxByteOnLan OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Data Bytes on Lan interface ."
::= { ruckusZDWLANEntry 44 }

ruckusZDWLANTxByteOnLan OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Data Bytes on Lan interface ."
::= { ruckusZDWLANEntry 45 }

ruckusZDWLANDownDropFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Drop Frame Number on Downlink of Wireless."
::= { ruckusZDWLANEntry 46 }

ruckusZDWLANDownRetxFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmitted Frame Number on Downlink of Wireless."
::= { ruckusZDWLANEntry 47 }

ruckusZDWLANDownTotalFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Frame Number on Downlink of Wireless."
::= { ruckusZDWLANEntry 48 }

ruckusZDWLANDownTotalErrFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Error Frame Number on Downlink of Wireless."
::= { ruckusZDWLANEntry 49 }

ruckusZDWLANUpTotalFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Frame Number on Uplink of Wireless."
::= { ruckusZDWLANEntry 50 }

ruckusZDWLANUpDropFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Drop Frame Number on Uplink of Wireless."
::= { ruckusZDWLANEntry 51 }

ruckusZDWLANUpRetxFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmitted Frame Number on Uplink of Wireless."
::= { ruckusZDWLANEntry 52 }

ruckusZDWLANNAME OBJECT-TYPE
SYNTAX RuckusSSID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WLAN NAME."
::= { ruckusZDWLANEntry 108 }


ruckusZDWLANAPInfo OBJECT IDENTIFIER ::= { ruckusZDWLANObjects 2 }

ruckusZDWLANAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN AP table."
::= { ruckusZDWLANAPInfo 1 }

ruckusZDWLANAPEntry OBJECT-TYPE
SYNTAX RuckusZDWLANAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN AP entry."
INDEX {
ruckusZDWLANAPMacAddr }
::= { ruckusZDWLANAPTable 1 }

RuckusZDWLANAPEntry ::= SEQUENCE {
ruckusZDWLANAPMacAddr MacAddress,
ruckusZDWLANAPDescription DisplayString,
ruckusZDWLANAPStatus INTEGER,
ruckusZDWLANAPModel DisplayString,
ruckusZDWLANAPSerialNumber DisplayString,
ruckusZDWLANAPUptime TimeTicks,
ruckusZDWLANAPSWversion DisplayString,
ruckusZDWLANAPHWversion DisplayString,
ruckusZDWLANAPIPAddr IpAddress,
ruckusZDWLANAPNumRadios Unsigned32,
ruckusZDWLANAPNumVAP Unsigned32,
ruckusZDWLANAPNumSta Unsigned32,
ruckusZDWLANAPNumRogues Unsigned32,
ruckusZDWLANAPConnectionMode INTEGER,
ruckusZDWLANAPMeshEnable TruthValue,
ruckusZDWLANAPMeshHops Unsigned32,
ruckusZDWLANAPMeshType INTEGER,
ruckusZDWLANAPLANStatsRXByte Counter64,
ruckusZDWLANAPLANStatsRXPkt Counter64,
ruckusZDWLANAPLANStatsRXPktErr Counter64,
ruckusZDWLANAPLANStatsRXPKTSucc Counter64,
ruckusZDWLANAPLANStatsTXByte Counter64,
ruckusZDWLANAPLANStatsTXPkt Counter64,
ruckusZDWLANAPMemUtil INTEGER,
ruckusZDWLANAPMemTotal Unsigned32,
ruckusZDWLANAPCPUUtil INTEGER,
ruckusZDWLANAPFWSize Unsigned32,
ruckusZDWLANAPFWAvail Unsigned32,
ruckusZDWLANAPMultipleVlanCapability TruthValue,
ruckusZDWLANAP11bCapable TruthValue,
ruckusZDWLANAP11gCapable TruthValue,
ruckusZDWLANAPMultiModeAccessStatus TruthValue,
ruckusZDWLANAPEthStateChange Counter32,
ruckusZDWLANAPSyncConf TruthValue,
ruckusZDWLANAPUpgrade TruthValue,
ruckusZDWLANAPFirstJoinTime DisplayString,
ruckusZDWLANAPLastBootTime DisplayString,
ruckusZDWLANAPLastUpgradeTime DisplayString,
ruckusZDWLANAPLastConfSyncTime DisplayString,
ruckusZDWLANAPLANStatsRXPKTBcast Counter64,
ruckusZDWLANAPLANStatsRXPKTMcast Counter64,
ruckusZDWLANAPLANStatsRXPKTUcast Counter64,
ruckusZDWLANAPLANStatsTXPKTBcast Counter64,
ruckusZDWLANAPLANStatsTXPKTMcast Counter64,
ruckusZDWLANAPLANStatsTXPKTUcast Counter64,
ruckusZDWLANAPLANStatsDropped Counter64,
ruckusZDWLANAPMeshUpPortCntUpdown Counter32,
ruckusZDWLANAPMeshDownPortCntUpdown Counter32,
ruckusZDWLANAPTxFrameDropped Counter32,
ruckusZDWLANAPTxFrameError Counter32,
ruckusZDWLANAPCoverageTech INTEGER,
ruckusZDWLANAPStaTxBytes Counter64,
ruckusZDWLANAPStaRxBytes Counter64,
ruckusZDWLANAPNetmask IpAddress,
ruckusZDWLANAPGateway IpAddress,
ruckusZDWLANAPDNS1 IpAddress,
ruckusZDWLANAPDNS2 IpAddress,
ruckusZDWLANAPTotalUser Unsigned32,
ruckusZDWLANAPLANStatsRXByteRate Counter32,
ruckusZDWLANAPLANStatsTXByteRate Counter32
}

ruckusZDWLANAPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address."
::= { ruckusZDWLANAPEntry 1 }

ruckusZDWLANAPDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ruckusZDWLANAPEntry 2 }

ruckusZDWLANAPStatus OBJECT-TYPE
SYNTAX INTEGER { disconnected(0), connected(1), approvalPending(2), upgradingFirmware(3), provisioning(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connection status with ZD."
::= { ruckusZDWLANAPEntry 3 }

ruckusZDWLANAPModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Model name."
::= { ruckusZDWLANAPEntry 4 }

ruckusZDWLANAPSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number."
::= { ruckusZDWLANAPEntry 5 }

ruckusZDWLANAPUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Up time."
::= { ruckusZDWLANAPEntry 6 }

ruckusZDWLANAPSWversion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software version."
::= { ruckusZDWLANAPEntry 7 }

ruckusZDWLANAPHWversion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware version."
::= { ruckusZDWLANAPEntry 8 }

ruckusZDWLANAPIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address."
::= { ruckusZDWLANAPEntry 10 }

ruckusZDWLANAPNumRadios OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of radios."
::= { ruckusZDWLANAPEntry 13 }

ruckusZDWLANAPNumVAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of APs."
::= { ruckusZDWLANAPEntry 14 }

ruckusZDWLANAPNumSta OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of authenticated terminal which is using currently on this AP."
::= { ruckusZDWLANAPEntry 15 }

ruckusZDWLANAPNumRogues OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rogue devices."
::= { ruckusZDWLANAPEntry 16 }

ruckusZDWLANAPConnectionMode OBJECT-TYPE
SYNTAX INTEGER { layer2 (0), layer3 (1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connection mode with ZD."
::= { ruckusZDWLANAPEntry 17 }

ruckusZDWLANAPMeshEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mesh enable."
::= { ruckusZDWLANAPEntry 18 }

ruckusZDWLANAPMeshHops OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of mesh hops."
::= { ruckusZDWLANAPEntry 19 }

ruckusZDWLANAPMeshType OBJECT-TYPE
SYNTAX INTEGER { unknown(0), root (1), mesh (2), forming(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mesh type."
::= { ruckusZDWLANAPEntry 20 }

ruckusZDWLANAPLANStatsRXByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes received on LAN port."
::= { ruckusZDWLANAPEntry 21 }

ruckusZDWLANAPLANStatsRXPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets received on LAN port."
::= { ruckusZDWLANAPEntry 22 }

ruckusZDWLANAPLANStatsRXPktErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets received erroneously on LAN port."
::= { ruckusZDWLANAPEntry 23 }

ruckusZDWLANAPLANStatsRXPKTSucc OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets received successfully on LAN port."
::= { ruckusZDWLANAPEntry 24 }

ruckusZDWLANAPLANStatsTXByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes transmitted on LAN port."
::= { ruckusZDWLANAPEntry 25 }

ruckusZDWLANAPLANStatsTXPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets transmitted on LAN port."
::= { ruckusZDWLANAPEntry 26 }

ruckusZDWLANAPMemUtil OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Memory utilization percentage."
::= { ruckusZDWLANAPEntry 27 }

ruckusZDWLANAPMemTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total memory in KB."
::= { ruckusZDWLANAPEntry 28 }

ruckusZDWLANAPCPUUtil OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU utilization percentage."
::= { ruckusZDWLANAPEntry 29 }

ruckusZDWLANAPFWSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware partition size in byte."
::= { ruckusZDWLANAPEntry 30 }

ruckusZDWLANAPFWAvail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware partition available size in byte."
::= { ruckusZDWLANAPEntry 31 }

ruckusZDWLANAPMultipleVlanCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP support multiple vlan capability."
::= { ruckusZDWLANAPEntry 32 }

ruckusZDWLANAP11bCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Support 802.11b."
::= { ruckusZDWLANAPEntry 36 }

ruckusZDWLANAP11gCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Support 802.11g."
::= { ruckusZDWLANAPEntry 37 }

ruckusZDWLANAPMultiModeAccessStatus OBJECT-TYPE
SYNTAX TruthValue {false(0),true(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Support simutaneously connections from 11a/b/g clients."
::= { ruckusZDWLANAPEntry 38 }

ruckusZDWLANAPEthStateChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ethernet port up/down count."
::= { ruckusZDWLANAPEntry 39 }

ruckusZDWLANAPSyncConf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Manually push configuration to this AP."
::= { ruckusZDWLANAPEntry 41 }

ruckusZDWLANAPUpgrade OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upgrade this AP."
::= { ruckusZDWLANAPEntry 42 }

ruckusZDWLANAPFirstJoinTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of first join."
::= { ruckusZDWLANAPEntry 43 }

ruckusZDWLANAPLastBootTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of last boot."
::= { ruckusZDWLANAPEntry 44 }

ruckusZDWLANAPLastUpgradeTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of last firmware upgrade."
::= { ruckusZDWLANAPEntry 45 }

ruckusZDWLANAPLastConfSyncTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of last configuration synchronization."
::= { ruckusZDWLANAPEntry 46 }

ruckusZDWLANAPLANStatsRXPKTBcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcast packets received successfully on LAN port."
::= { ruckusZDWLANAPEntry 47 }

ruckusZDWLANAPLANStatsRXPKTMcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast packets received successfully on LAN port."
::= { ruckusZDWLANAPEntry 48 }

ruckusZDWLANAPLANStatsRXPKTUcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast packets received successfully on LAN port."
::= { ruckusZDWLANAPEntry 49 }

ruckusZDWLANAPLANStatsTXPKTBcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcast packets transmitted successfully on LAN port."
::= { ruckusZDWLANAPEntry 50 }

ruckusZDWLANAPLANStatsTXPKTMcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast packets transmitted successfully on LAN port."
::= { ruckusZDWLANAPEntry 51 }

ruckusZDWLANAPLANStatsTXPKTUcast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast packets transmitted successfully on LAN port."
::= { ruckusZDWLANAPEntry 52 }

ruckusZDWLANAPLANStatsDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped on LAN port."
::= { ruckusZDWLANAPEntry 53 }

ruckusZDWLANAPMeshUpPortCntUpdown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"updown count of AP as a up port node in mesh mode."
::= { ruckusZDWLANAPEntry 54 }

ruckusZDWLANAPMeshDownPortCntUpdown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"updown count of AP as a down port node in mesh mode."
::= { ruckusZDWLANAPEntry 55 }

ruckusZDWLANAPTxFrameDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Droped Frame count of AP wireless transmitted."
::= { ruckusZDWLANAPEntry 57 }

ruckusZDWLANAPTxFrameError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Frame count of AP wireless transmitted."
::= { ruckusZDWLANAPEntry 58 }

ruckusZDWLANAPCoverageTech OBJECT-TYPE
SYNTAX INTEGER { indoor(1), indoor-distribute(2), outdoor(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP's coverage technology."
::= { ruckusZDWLANAPEntry 59 }

ruckusZDWLANAPStaTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client send data to this AP.(kbytes) "
::= { ruckusZDWLANAPEntry 61 }

ruckusZDWLANAPStaRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client receive data from this AP.(kbytes)"
::= { ruckusZDWLANAPEntry 62 }

ruckusZDWLANAPNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Netmask address."
::= { ruckusZDWLANAPEntry 100 }

ruckusZDWLANAPGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gateway address."
::= { ruckusZDWLANAPEntry 101 }

ruckusZDWLANAPDNS1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary DNS address."
::= { ruckusZDWLANAPEntry 105 }

ruckusZDWLANAPDNS2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sencond DNS address."
::= { ruckusZDWLANAPEntry 106 }

ruckusZDWLANAPTotalUser OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of client AP can support."
::= { ruckusZDWLANAPEntry 110 }

ruckusZDWLANAPLANStatsRXByteRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes rate received on LAN port each 90s."
::= { ruckusZDWLANAPEntry 111 }

ruckusZDWLANAPLANStatsTXByteRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes rate transmitted on LAN port each 90s."
::= { ruckusZDWLANAPEntry 112 }

ruckusZDWLANAPRadioStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANAPRadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN AP Radio table."
::= { ruckusZDWLANAPInfo 2 }

ruckusZDWLANAPRadioStatsEntry OBJECT-TYPE
SYNTAX RuckusZDWLANAPRadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN AP Radio entry."
INDEX {
ruckusZDWLANAPRadioStatsAPMacAddr,
ruckusZDWLANAPRadioStatsRadioIndex }
::= { ruckusZDWLANAPRadioStatsTable 1 }

[nijazse]

RuckusZDWLANAPRadioStatsEntry ::= SEQUENCE {
ruckusZDWLANAPRadioStatsAPMacAddr MacAddress,
ruckusZDWLANAPRadioStatsRadioIndex Unsigned32,
ruckusZDWLANAPRadioStatsRadioType INTEGER,
ruckusZDWLANAPRadioStatsChannel Unsigned32,
ruckusZDWLANAPRadioStatsTxPower INTEGER,
ruckusZDWLANAPRadioStatsMeshEnable TruthValue,
ruckusZDWLANAPRadioStatsNumVAP Unsigned32,
ruckusZDWLANAPRadioStatsNumSta Unsigned32,
ruckusZDWLANAPRadioStatsAvgStaRSSI Integer32,
ruckusZDWLANAPRadioStatsRxPkts Counter64,
ruckusZDWLANAPRadioStatsRxBytes Counter64,
ruckusZDWLANAPRadioStatsRxMulticast Counter64,
ruckusZDWLANAPRadioStatsTxPkts Counter64,
ruckusZDWLANAPRadioStatsTxBytes Counter64,
ruckusZDWLANAPRadioStatsTxMulticast Counter64,
ruckusZDWLANAPRadioStatsTxFail Counter64,
ruckusZDWLANAPRadioStatsTxRetries Counter64,
ruckusZDWLANAPRadioStatsPowerMgmt TruthValue,
ruckusZDWLANAPRadioStatsMaxSta Unsigned32,
ruckusZDWLANAPRadioStatsFrameErrorRate Unsigned32,
ruckusZDWLANAPRadioStatsFrameRetryRate Unsigned32,
ruckusZDWLANAPRadioStatsMonitoredTime TimeTicks,
ruckusZDWLANAPRadioStatsTotalAssocTime Counter64,
ruckusZDWLANAPRadioStatsAuthReq Counter64,
ruckusZDWLANAPRadioStatsAuthResp Counter64,
ruckusZDWLANAPRadioStatsAuthSuccess Counter64,
ruckusZDWLANAPRadioStatsAuthFail Counter64,
ruckusZDWLANAPRadioStatsAssocReq Counter64,
ruckusZDWLANAPRadioStatsAssocResp Counter64,
ruckusZDWLANAPRadioStatsReassocReq Counter64,
ruckusZDWLANAPRadioStatsReassocResp Counter64,
ruckusZDWLANAPRadioStatsAssocSuccess Counter64,
ruckusZDWLANAPRadioStatsAssocFail Counter64,
ruckusZDWLANAPRadioStatsAssocDenied Counter64,
ruckusZDWLANAPRadioStatsDiassocAbnormal Counter64,
ruckusZDWLANAPRadioStatsDiassocCapacity Counter64,
ruckusZDWLANAPRadioStatsDiassocLeave Counter64,
ruckusZDWLANAPRadioStatsDiassocMisc Counter64,
ruckusZDWLANAPRadioStatsResourceUtil Unsigned32,
ruckusZDWLANAPRadioStatsRxSignalFrm Counter64,
ruckusZDWLANAPRadioStatsTxSignalFrm Counter64,
ruckusZDWLANAPRadioStatsTotalSignalFrm Counter64,
ruckusZDWLANAPRadioStatsAntennaGain Unsigned32,
ruckusZDWLANAPRadioStatsBeaconPeriod Unsigned32,
ruckusZDWLANAPRadioStatsRTSThreshold Unsigned32,
ruckusZDWLANAPRadioStatsFragThreshold Unsigned32
}

ruckusZDWLANAPRadioStatsAPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP MAC address."
::= { ruckusZDWLANAPRadioStatsEntry 1 }

ruckusZDWLANAPRadioStatsRadioIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio index of the AP."
::= { ruckusZDWLANAPRadioStatsEntry 2 }

ruckusZDWLANAPRadioStatsRadioType OBJECT-TYPE
SYNTAX INTEGER { radio11bg (0), radio11a (1), radio11ng(2), radio11na(3), radio11ac(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio type."
::= { ruckusZDWLANAPRadioStatsEntry 3 }

ruckusZDWLANAPRadioStatsChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio channel."
::= { ruckusZDWLANAPRadioStatsEntry 4 }

ruckusZDWLANAPRadioStatsTxPower OBJECT-TYPE
SYNTAX INTEGER { full(0), half(1), quarter(2), eighth(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit power of radio."
::= { ruckusZDWLANAPRadioStatsEntry 5 }

ruckusZDWLANAPRadioStatsMeshEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mesh enable."
::= { ruckusZDWLANAPRadioStatsEntry 6 }

ruckusZDWLANAPRadioStatsNumVAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of APs."
::= { ruckusZDWLANAPRadioStatsEntry 7 }

ruckusZDWLANAPRadioStatsNumSta OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations."
::= { ruckusZDWLANAPRadioStatsEntry 8 }

ruckusZDWLANAPRadioStatsAvgStaRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average client RSSI."
::= { ruckusZDWLANAPRadioStatsEntry 9 }

ruckusZDWLANAPRadioStatsRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received packets."
::= { ruckusZDWLANAPRadioStatsEntry 10 }

ruckusZDWLANAPRadioStatsRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received bytes."
::= { ruckusZDWLANAPRadioStatsEntry 11 }

ruckusZDWLANAPRadioStatsRxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received multicast packets."
::= { ruckusZDWLANAPRadioStatsEntry 12 }

ruckusZDWLANAPRadioStatsTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted packets."
::= { ruckusZDWLANAPRadioStatsEntry 13 }

ruckusZDWLANAPRadioStatsTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted bytes."
::= { ruckusZDWLANAPRadioStatsEntry 14 }

ruckusZDWLANAPRadioStatsTxMulticast OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted multicast packets."
::= { ruckusZDWLANAPRadioStatsEntry 15 }

ruckusZDWLANAPRadioStatsTxFail OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted fail packets."
::= { ruckusZDWLANAPRadioStatsEntry 16 }

ruckusZDWLANAPRadioStatsTxRetries OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted retry packets."
::= { ruckusZDWLANAPRadioStatsEntry 17 }

ruckusZDWLANAPRadioStatsPowerMgmt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power management enable."
::= { ruckusZDWLANAPRadioStatsEntry 18 }

ruckusZDWLANAPRadioStatsMaxSta OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of max stations allowed."
::= { ruckusZDWLANAPRadioStatsEntry 19 }

ruckusZDWLANAPRadioStatsFrameErrorRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS
"1/10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame error rate."
::= { ruckusZDWLANAPRadioStatsEntry 20 }

ruckusZDWLANAPRadioStatsFrameRetryRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS
"1/10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame retry rate."
::= { ruckusZDWLANAPRadioStatsEntry 21 }

ruckusZDWLANAPRadioStatsMonitoredTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored time."
::= { ruckusZDWLANAPRadioStatsEntry 22 }

ruckusZDWLANAPRadioStatsTotalAssocTime OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client total association time."
::= { ruckusZDWLANAPRadioStatsEntry 24 }

ruckusZDWLANAPRadioStatsAuthReq OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication request."
::= { ruckusZDWLANAPRadioStatsEntry 25 }

ruckusZDWLANAPRadioStatsAuthResp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication response."
::= { ruckusZDWLANAPRadioStatsEntry 26 }

ruckusZDWLANAPRadioStatsAuthSuccess OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication success."
::= { ruckusZDWLANAPRadioStatsEntry 27 }


ruckusZDWLANAPRadioStatsAuthFail OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication fail."
::= { ruckusZDWLANAPRadioStatsEntry 28 }

ruckusZDWLANAPRadioStatsAssocReq OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association request."
::= { ruckusZDWLANAPRadioStatsEntry 29 }

ruckusZDWLANAPRadioStatsAssocResp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association response."
::= { ruckusZDWLANAPRadioStatsEntry 30 }

ruckusZDWLANAPRadioStatsReassocReq OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reassociation request."
::= { ruckusZDWLANAPRadioStatsEntry 31 }

ruckusZDWLANAPRadioStatsReassocResp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reassociation response."
::= { ruckusZDWLANAPRadioStatsEntry 32 }

ruckusZDWLANAPRadioStatsAssocSuccess OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association success."
::= { ruckusZDWLANAPRadioStatsEntry 33 }

ruckusZDWLANAPRadioStatsAssocFail OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association fail."
::= { ruckusZDWLANAPRadioStatsEntry 34 }

ruckusZDWLANAPRadioStatsAssocDenied OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association denied."
::= { ruckusZDWLANAPRadioStatsEntry 35 }

ruckusZDWLANAPRadioStatsDiassocAbnormal OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to abnormal causes."
::= { ruckusZDWLANAPRadioStatsEntry 36 }

ruckusZDWLANAPRadioStatsDiassocCapacity OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to device capacity."
::= { ruckusZDWLANAPRadioStatsEntry 37 }

ruckusZDWLANAPRadioStatsDiassocLeave OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to client leave."
::= { ruckusZDWLANAPRadioStatsEntry 38 }

ruckusZDWLANAPRadioStatsDiassocMisc OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation request due to other reasons."
::= { ruckusZDWLANAPRadioStatsEntry 39 }

ruckusZDWLANAPRadioStatsResourceUtil OBJECT-TYPE
SYNTAX Unsigned32
UNITS
"percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Resource utilization."
::= { ruckusZDWLANAPRadioStatsEntry 40 }

ruckusZDWLANAPRadioStatsRxSignalFrm OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received signal frames."
::= { ruckusZDWLANAPRadioStatsEntry 41 }

ruckusZDWLANAPRadioStatsTxSignalFrm OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted signal frames."
::= { ruckusZDWLANAPRadioStatsEntry 42 }

ruckusZDWLANAPRadioStatsTotalSignalFrm OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total signal frames."
::= { ruckusZDWLANAPRadioStatsEntry 43 }

ruckusZDWLANAPRadioStatsAntennaGain OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get antenna gain."
::= { ruckusZDWLANAPRadioStatsEntry 44 }

ruckusZDWLANAPRadioStatsBeaconPeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get beacon period."
::= { ruckusZDWLANAPRadioStatsEntry 45 }

ruckusZDWLANAPRadioStatsRTSThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get RTS threshold."
::= { ruckusZDWLANAPRadioStatsEntry 46 }

ruckusZDWLANAPRadioStatsFragThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get fragment threshold."
::= { ruckusZDWLANAPRadioStatsEntry 47 }

ruckusZDWLANStaInfo OBJECT IDENTIFIER ::= { ruckusZDWLANObjects 3 }


ruckusZDWLANStaTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANStaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN Station table."
::= { ruckusZDWLANStaInfo 1 }

ruckusZDWLANStaEntry OBJECT-TYPE
SYNTAX RuckusZDWLANStaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN Station entry."
INDEX {
ruckusZDWLANStaMacAddr }
::= { ruckusZDWLANStaTable 1 }

RuckusZDWLANStaEntry ::= SEQUENCE {
ruckusZDWLANStaMacAddr MacAddress,
ruckusZDWLANStaAPMacAddr MacAddress,
ruckusZDWLANStaBSSID MacAddress,
ruckusZDWLANStaSSID RuckusSSID,
ruckusZDWLANStaUser DisplayString,
ruckusZDWLANStaRadioType INTEGER,
ruckusZDWLANStaChannel Unsigned32,
ruckusZDWLANStaIPAddr IpAddress,
ruckusZDWLANStaAvgRSSI Integer32,
ruckusZDWLANStaRxPkts Counter32,
ruckusZDWLANStaRxBytes Counter64,
ruckusZDWLANStaTxPkts Counter32,
ruckusZDWLANStaTxBytes Counter64,
ruckusZDWLANStaRetries Counter32,
ruckusZDWLANStaAssocTime TimeTicks,
ruckusZDWLANStaRxError Counter32,
ruckusZDWLANStaTxSuccess Counter32,
ruckusZDWLANSta11bgReassoc Counter32,
ruckusZDWLANStaAssocTimestamp DisplayString,
ruckusZDWLANStaRetryBytes Counter32,
ruckusZDWLANStaSNR Integer32,
ruckusZDWLANStaRxDrop Counter32,
ruckusZDWLANStaTxDrop Counter32,
ruckusZDWLANStaTxError Counter32,
ruckusZDWLANStaVlanID INTEGER,
ruckusZDWLANStaAuthMode DisplayString,
ruckusZDWLANStaSignalStrength Integer32
}

ruckusZDWLANStaMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The station's MAC Address."
::= { ruckusZDWLANStaEntry 1 }

ruckusZDWLANStaAPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the associated AP."
::= { ruckusZDWLANStaEntry 2 }

ruckusZDWLANStaBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BSSID of WLAN."
::= { ruckusZDWLANStaEntry 3 }

ruckusZDWLANStaSSID OBJECT-TYPE
SYNTAX RuckusSSID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID."
::= { ruckusZDWLANStaEntry 4 }

ruckusZDWLANStaUser OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Logined username of the client."
::= { ruckusZDWLANStaEntry 5 }

ruckusZDWLANStaRadioType OBJECT-TYPE
SYNTAX INTEGER { radio11a (0), radio11b (1), radio11g(2), radio11ng(3), radio11na(4), radio11ac(5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio type."
::= { ruckusZDWLANStaEntry 6 }

ruckusZDWLANStaChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio channel."
::= { ruckusZDWLANStaEntry 7 }

ruckusZDWLANStaIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address."
::= { ruckusZDWLANStaEntry 8 }

ruckusZDWLANStaAvgRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Averaged RSSI."
::= { ruckusZDWLANStaEntry 9 }

ruckusZDWLANStaRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received packets."
::= { ruckusZDWLANStaEntry 10 }

ruckusZDWLANStaRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received bytes."
::= { ruckusZDWLANStaEntry 11 }

ruckusZDWLANStaTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted packets."
::= { ruckusZDWLANStaEntry 12 }

ruckusZDWLANStaTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted bytes."
::= { ruckusZDWLANStaEntry 13 }

ruckusZDWLANStaRetries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted retries."
::= { ruckusZDWLANStaEntry 14 }

ruckusZDWLANStaAssocTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time client has been associated."
::= { ruckusZDWLANStaEntry 15 }

ruckusZDWLANStaRxError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received error packets."
::= { ruckusZDWLANStaEntry 16 }

ruckusZDWLANStaTxSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Successful transmitted packets."
::= { ruckusZDWLANStaEntry 17 }

ruckusZDWLANSta11bgReassoc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reassociate count on B/G RF."
::= { ruckusZDWLANStaEntry 18 }

ruckusZDWLANStaAssocTimestamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp client associated."
::= { ruckusZDWLANStaEntry 19 }

ruckusZDWLANStaRetryBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted retry bytes."
::= { ruckusZDWLANStaEntry 20 }

ruckusZDWLANStaSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Station's Signal to Noise Ratio."
::= { ruckusZDWLANStaEntry 21 }

ruckusZDWLANStaRxDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Drop transmitted packets."
::= { ruckusZDWLANStaEntry 22 }

ruckusZDWLANStaTxDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Drop received packets."
::= { ruckusZDWLANStaEntry 23 }

ruckusZDWLANStaTxError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted error packets."
::= { ruckusZDWLANStaEntry 24 }

ruckusZDWLANStaVlanID OBJECT-TYPE
SYNTAX INTEGER ( 1..4094 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the station. 1 for not specified."
::= { ruckusZDWLANStaEntry 30 }

ruckusZDWLANStaAuthMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication mode of authenticated terminal."
::= { ruckusZDWLANStaEntry 80 }

ruckusZDWLANStaSignalStrength OBJECT-TYPE
SYNTAX Integer32
UNITS
"dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal strength"
::= { ruckusZDWLANStaEntry 81 }

ruckusZDWiredStaTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWiredStaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD Wired Station table."
::= { ruckusZDWLANStaInfo 2 }

ruckusZDWiredStaEntry OBJECT-TYPE
SYNTAX RuckusZDWiredStaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD Wired Station entry."
INDEX {
ruckusZDWiredStaMacAddr }
::= { ruckusZDWiredStaTable 1 }

RuckusZDWiredStaEntry ::= SEQUENCE {
ruckusZDWiredStaMacAddr MacAddress,
ruckusZDWiredStaAPMacAddr MacAddress,
ruckusZDWiredStaIPAddr IpAddress,
ruckusZDWiredStaIPV6Addr OCTET STRING,
ruckusZDWiredStaVlanID INTEGER,
ruckusZDWiredStaUserName DisplayString,
ruckusZDWiredStaAuthState INTEGER,
ruckusZDWiredStaAssocTime TimeTicks,
ruckusZDWiredStaRxPkts Counter32,
ruckusZDWiredStaRxBytes Counter64,
ruckusZDWiredStaTxPkts Counter32,
ruckusZDWiredStaTxBytes Counter64,
}

ruckusZDWiredStaMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The station's MAC Address."
::= { ruckusZDWiredStaEntry 1 }

ruckusZDWiredStaAPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the associated AP."
::= { ruckusZDWiredStaEntry 3 }

ruckusZDWiredStaIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address."
::= { ruckusZDWiredStaEntry 5 }

ruckusZDWiredStaIPV6Addr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPV6 Address"
::= { ruckusZDWiredStaEntry 6 }

ruckusZDWiredStaVlanID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the station. 1 for not specified."
::= { ruckusZDWiredStaEntry 8 }

ruckusZDWiredStaUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Logined username of the client."
::= { ruckusZDWiredStaEntry 9 }

ruckusZDWiredStaAuthState OBJECT-TYPE
SYNTAX INTEGER {Unauthorized(0), Authorized(1), Authorized-as-guest(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication state of authenticated terminal."
::= { ruckusZDWiredStaEntry 10 }

ruckusZDWiredStaAssocTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time client has been associated."
::= { ruckusZDWiredStaEntry 11 }

ruckusZDWiredStaRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received packets."
::= { ruckusZDWiredStaEntry 15 }

ruckusZDWiredStaRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received bytes."
::= { ruckusZDWiredStaEntry 16 }

ruckusZDWiredStaTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted packets."
::= { ruckusZDWiredStaEntry 17 }

ruckusZDWiredStaTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted bytes."
::= { ruckusZDWiredStaEntry 18 }

ruckusZDWLANRogueInfo OBJECT IDENTIFIER ::= { ruckusZDWLANObjects 4 }

ruckusZDWLANRogueTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANRogueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN rogue device table."
::= { ruckusZDWLANRogueInfo 1 }

ruckusZDWLANRogueEntry OBJECT-TYPE
SYNTAX RuckusZDWLANRogueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN rogue device entry."
INDEX {
ruckusZDWLANRogueIndex }
::= { ruckusZDWLANRogueTable 1 }

RuckusZDWLANRogueEntry ::= SEQUENCE {
ruckusZDWLANRogueIndex InterfaceIndex,
ruckusZDWLANRogueMacAddr MacAddress,
ruckusZDWLANRogueSSID RuckusSSID,
ruckusZDWLANRogueRadioType INTEGER,
ruckusZDWLANRogueChannel Unsigned32,
ruckusZDWLANRogueRSSI Integer32,
ruckusZDWLANRogueType INTEGER,
ruckusZDWLANRogueEncrypted INTEGER,
ruckusZDWLANRogueSignalStrength Integer32
}

ruckusZDWLANRogueIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index."
::= { ruckusZDWLANRogueEntry 200 }

ruckusZDWLANRogueMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rogue device's MAC Address."
::= { ruckusZDWLANRogueEntry 1 }

ruckusZDWLANRogueSSID OBJECT-TYPE
SYNTAX RuckusSSID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID."
::= { ruckusZDWLANRogueEntry 2 }

ruckusZDWLANRogueRadioType OBJECT-TYPE
SYNTAX INTEGER { radio11bg (0), radio11a (1), radio11ng(2), radio11na(3), radio11ac(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio type."
::= { ruckusZDWLANRogueEntry 3 }

ruckusZDWLANRogueChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio channel."
::= { ruckusZDWLANRogueEntry 4 }

ruckusZDWLANRogueRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI."
::= { ruckusZDWLANRogueEntry 5 }

ruckusZDWLANRogueType OBJECT-TYPE
SYNTAX INTEGER { ap (0), ad-hoc (1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the rogue device."
::= { ruckusZDWLANRogueEntry 6 }

ruckusZDWLANRogueEncrypted OBJECT-TYPE
SYNTAX INTEGER { open (0), encrypted (1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption mode."
::= { ruckusZDWLANRogueEntry 7 }

ruckusZDWLANRogueSignalStrength OBJECT-TYPE
SYNTAX Integer32
UNITS
"dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal strength"
::= { ruckusZDWLANRogueEntry 11 }


ruckusZDWLANVapTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANVapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN AP table per each WLAN."
::= { ruckusZDWLANAPInfo 3 }

ruckusZDWLANVapEntry OBJECT-TYPE
SYNTAX RuckusZDWLANVapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN vap entry."
INDEX {
ruckusZDWLANVapBSSID }
::= { ruckusZDWLANVapTable 1 }

RuckusZDWLANVapEntry ::= SEQUENCE {
ruckusZDWLANVapBSSID MacAddress,
ruckusZDWLANVapPAPAddr MacAddress,
ruckusZDWLANVapSSID RuckusSSID,
ruckusZDWLANVapLanRxBytes Counter64,
ruckusZDWLANVapLanTxBytes Counter64,
ruckusZDWLANVapWlanRxBytes Counter64,
ruckusZDWLANVapWlanTxBytes Counter64,
ruckusZDWLANVapWlanRxErrorPkt Counter64,
ruckusZDWLANVapWlanRxUnicastPkt Counter64,
ruckusZDWLANVapWlanTxUnicastPkt Counter64,
ruckusZDWLANVapWlanRxPkt Counter64,
ruckusZDWLANVapWlanRxDropPkt Counter64,
ruckusZDWLANVapWlanTxErrPkt Counter64,
ruckusZDWLANVapWlanTxPkt Counter64,
ruckusZDWLANVapWlanTxDropPkt Counter64
}

ruckusZDWLANVapBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VAP's BSSID ,it is a MAC Address."
::= { ruckusZDWLANVapEntry 1 }

ruckusZDWLANVapPAPAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the Parent's AP."
::= { ruckusZDWLANVapEntry 2 }

ruckusZDWLANVapSSID OBJECT-TYPE
SYNTAX RuckusSSID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID of VAP."
::= { ruckusZDWLANVapEntry 3 }

ruckusZDWLANVapLanRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received bytes on LAN in VAP ."
::= { ruckusZDWLANVapEntry 6 }

ruckusZDWLANVapLanTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted bytes on LAN in VAP."
::= { ruckusZDWLANVapEntry 7 }

ruckusZDWLANVapWlanRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received bytes on WLAN in VAP ."
::= { ruckusZDWLANVapEntry 8 }

ruckusZDWLANVapWlanTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted bytes on WLAN in VAP."
::= { ruckusZDWLANVapEntry 9 }

ruckusZDWLANVapWlanRxErrorPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receiveed error packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 11 }

ruckusZDWLANVapWlanRxUnicastPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receiveed unicast packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 12 }

ruckusZDWLANVapWlanTxUnicastPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted unicast packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 13 }

ruckusZDWLANVapWlanRxPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 14 }

ruckusZDWLANVapWlanRxDropPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received dropped packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 15 }

ruckusZDWLANVapWlanTxErrPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted error packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 16 }

ruckusZDWLANVapWlanTxPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 17 }

ruckusZDWLANVapWlanTxDropPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted dropped packet on WLAN in VAP."
::= { ruckusZDWLANVapEntry 18 }

ruckusZDWLANIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN AP Interface table per each AP."
::= { ruckusZDWLANAPInfo 4 }

ruckusZDWLANIfEntry OBJECT-TYPE
SYNTAX RuckusZDWLANIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN vap entry."
INDEX {
ruckusZDWLANAPMac,
ruckusZDWLANAPIfIndex }
::= { ruckusZDWLANIfTable 1 }

RuckusZDWLANIfEntry ::= SEQUENCE {
ruckusZDWLANAPMac MacAddress,
ruckusZDWLANAPIfIndex InterfaceIndex,
ruckusZDWLANAPIfDescr DisplayString,
ruckusZDWLANAPIfType IANAifType,
ruckusZDWLANAPIfMtu Integer32,
ruckusZDWLANAPIfSpeed DisplayString,
ruckusZDWLANAPIfPhysAddress DisplayString,
ruckusZDWLANAPIfAdminStatus INTEGER,
ruckusZDWLANAPIfOperStatus INTEGER,
ruckusZDWLANAPIfInOctets Counter32,
ruckusZDWLANAPIfInUcastPkts Counter32,
ruckusZDWLANAPIfInNUcastPkts Counter32,
ruckusZDWLANAPIfInDiscards Counter32,
ruckusZDWLANAPIfInErrors Counter32,
ruckusZDWLANAPIfInUnknownProtos Counter32,
ruckusZDWLANAPIfOutOctets Counter32,
ruckusZDWLANAPIfOutUcastPkts Counter32,
ruckusZDWLANAPIfOutNUcastPkts Counter32,
ruckusZDWLANAPIfOutDiscards Counter32,
ruckusZDWLANAPIfOutErrors Counter32,
ruckusZDWLANAPIfName DisplayString,
ruckusZDWLANAPIfNameDefined DisplayString
}

ruckusZDWLANAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's Mac Address."
::= { ruckusZDWLANIfEntry 1 }

ruckusZDWLANAPIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of Interface in AP ."
::= { ruckusZDWLANIfEntry 2 }

ruckusZDWLANAPIfDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Description information for this interface."
::= { ruckusZDWLANIfEntry 3 }

ruckusZDWLANAPIfType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of interface."
::= { ruckusZDWLANIfEntry 4 }

ruckusZDWLANAPIfMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received."
::= { ruckusZDWLANIfEntry 5 }

ruckusZDWLANAPIfSpeed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in bits."
::= { ruckusZDWLANIfEntry 6 }

ruckusZDWLANAPIfPhysAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's mac address."
::= { ruckusZDWLANIfEntry 7 }

ruckusZDWLANAPIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The desired state of the interface: up(1), down(2) ,testing(3) ."
::= { ruckusZDWLANIfEntry 8 }

ruckusZDWLANAPIfOperStatus OBJECT-TYPE
SYNTAX INTEGER{
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status can not be determined
-- for some reason.
dormant(5),
notPresent(6), -- some component is missing
lowerLayerDown(7) -- down due to state of
-- lower-layer interface(s)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface:
up(1), down(2), testing(3), unknown(4), dormant(5) , notPresent(6), lowerLayerDown(7)."
::= { ruckusZDWLANIfEntry 9 }

ruckusZDWLANAPIfInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface."
::= { ruckusZDWLANIfEntry 10 }

ruckusZDWLANAPIfInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast packets received on the interface."
::= { ruckusZDWLANIfEntry 11 }

ruckusZDWLANAPIfInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast and broadcast packets received on the interface."
::= { ruckusZDWLANIfEntry 12 }

ruckusZDWLANAPIfInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be discarded even though no errors had been detected ."
::= { ruckusZDWLANIfEntry 13 }

ruckusZDWLANAPIfInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that contained errors."
::= { ruckusZDWLANIfEntry 14 }

ruckusZDWLANAPIfInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received via the interface which were discarded because of an unknown or unsupported protocol."
::= { ruckusZDWLANIfEntry 15 }

ruckusZDWLANAPIfOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the interface."
::= { ruckusZDWLANIfEntry 16 }

ruckusZDWLANAPIfOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast packets transmitted out of the interface."
::= { ruckusZDWLANIfEntry 17 }

ruckusZDWLANAPIfOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast and broadcast packets transmitted out of the interface."
::= { ruckusZDWLANIfEntry 18 }

ruckusZDWLANAPIfOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen to be discarded even though no errors had been detected."
::= { ruckusZDWLANIfEntry 19 }

ruckusZDWLANAPIfOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that could not be transmitted because of errors."
::= { ruckusZDWLANIfEntry 20 }

ruckusZDWLANAPIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of interface."
::= { ruckusZDWLANIfEntry 21 }

ruckusZDWLANAPIfNameDefined OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of interface."
::= { ruckusZDWLANIfEntry 22 }

ruckusZDWLANAPEthStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANAPEthStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN AP Ethernet Interface status table per each AP."
::= { ruckusZDWLANAPInfo 8 }

ruckusZDWLANAPEthStatusEntry OBJECT-TYPE
SYNTAX RuckusZDWLANAPEthStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN AP ethernet interface status entry."
INDEX {
ruckusZDWLANAPMacAddress,
ruckusZDWLANAPEthPortId }
::= { ruckusZDWLANAPEthStatusTable 1 }

RuckusZDWLANAPEthStatusEntry ::= SEQUENCE {
ruckusZDWLANAPMacAddress MacAddress,
ruckusZDWLANAPEthPortId INTEGER,
ruckusZDWLANAPEthIfname OCTET STRING,
ruckusZDWLANAPEthDot1xStatus INTEGER,
ruckusZDWLANAPEthLogicalStatus INTEGER,
ruckusZDWLANAPEthPhyStatus INTEGER,
ruckusZDWLANAPEthPhyIfSpeed INTEGER,
ruckusZDWLANAPEthPhyLinkStatus INTEGER,
ruckusZDWLANAPEthLabel OCTET STRING
}

ruckusZDWLANAPMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's Mac Address."
::= { ruckusZDWLANAPEthStatusEntry 1 }

ruckusZDWLANAPEthPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap ethernet port id."
::= { ruckusZDWLANAPEthStatusEntry 2 }

ruckusZDWLANAPEthIfname OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of interface."
::= { ruckusZDWLANAPEthStatusEntry 5 }

ruckusZDWLANAPEthDot1xStatus OBJECT-TYPE
SYNTAX INTEGER {
auth(1),
supp(2),
none(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap ethernet port Dot1xStatus."
::= { ruckusZDWLANAPEthStatusEntry 6 }

ruckusZDWLANAPEthLogicalStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap ethernet port logical status."
::= { ruckusZDWLANAPEthStatusEntry 7 }

ruckusZDWLANAPEthPhyStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap ethernet port physical status."
::= { ruckusZDWLANAPEthStatusEntry 8 }


ruckusZDWLANAPEthPhyIfSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap ethernet interface's current bandwidth in Mbits,."
::= { ruckusZDWLANAPEthStatusEntry 9 }

ruckusZDWLANAPEthPhyLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
full(1),
half(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap ethernet port physical link status."
::= { ruckusZDWLANAPEthStatusEntry 10 }

ruckusZDWLANAPEthLabel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap ethernet port label."
::= { ruckusZDWLANAPEthStatusEntry 11 }

END

[kloczek]

I emailed Ruckus and get from them MIB files for my Wireless Zone Director.
I put MIB files to /usr/share/snmp/mibs location and restart the server.
When i do snmptranslate i get the numeric form of the OID.
Zabbix reads MIB files.

Problem is, when i add item with that numeric form of OID, Zabbix displays the message that item is not supported (SNMP error: (noSuchName) There is no such variable name in this MIB.)

What is the problem here

Just try use on such OID snmpwalk command,
BTW copy of the MIB file to the /usr/share/snmp/mibs it is not all what you need to do.
MIB file needs to be added in the net-snmp configuration by for example put in /etc/snmp/snmp.local.conf file line:

mibs +<NAME-OF-YOUR-MIB>

[nijazse]

Just try use on such OID snmpwalk command,
BTW copy of the MIB file to the /usr/share/snmp/mibs it is not all what you need to do.
MIB file needs to be added in the net-snmp configuration by for example put in /etc/snmp/snmp.local.conf file line:

mibs +<NAME-OF-YOUR-MIB>

I used snmpwalk command on this OID and i get correct results.

Also, i edited net-snmp configuration in /etc/snmp/snmp.conf file and included MIB files. I posted screenshot, hope my configuration is OK?

Zabbix item is still Not supported. It still displays the message that item is not supported (SNMP error: (noSuchName) There is no such variable name in this MIB.)

[troffasky]

It sounds like Zabbix is not picking up the MIB you have installed locally. You could restart Zabbix server and look for errors mentioning this MIB.

[nijazse]

I did LLD using this OID and all work well.
I can see the results and they are accurate.

Where can i look for errors about this MIB? Is there a log file, or?
When i restart the server i didnt get any errors.
Thanks

[kloczek]

IAlso, i edited net-snmp configuration in /etc/snmp/snmp.conf file and included MIB files. I posted screenshot, hope my configuration is OK?

Adding some entries to snmp.local.conf allows keep snmp.conf untouched as usually this file is installed and updated by package manager.
Simple snmp.local.conf is parsed after snmp.conf.
Keeping all local changes into separated files allow easier to move those changes around, keep track of those changes or making backup.

[troffasky]

Where can i look for errors about this MIB? Is there a log file, or?
When i restart the server i didnt get any errors.

I wouldn't expect to see errors on the CLI. When Zabbix doesn't like the MIBs I feed it, it fills the server log with errors about the particular MIB.