SNMP Builder for Zabbix

[asterroid]

Hi!

What CWidget hidden secret?

[CeeEss]

[QUOTE=giapnguyen;64585]Unfortunately, I've switched my job and don't touch zabbix server any more . But I will try to revise 1.8.2 to help you guys soon.
I hope someone adopt the project for me. It really helpful.

Sure is helpful, and depressing that it won't receive the attention it's due after such a promising start. Zabbix, if you want to jump out way ahead of the other wannabe-Zabbixes (and match what WhatsUp, Openview, etc can already do with SNMP) - take SNMP seriously, adopt this and make it part of Zabbix!

thx for your hard work, giapnguyen!

[Wonderer]

Any chance we'll see a version of this released soon which works with 1.8.2? I really like this addon.

To make it work on the latest 1.8.3 (and probably 1.8.2) do following changes:

in the file snmp_builder.php
change

$page['scripts'] = array('../snmp_builder/Tree.js','../snmp_builder/snmp_builder.js','../snmp_builder/DynTable.js','scriptaculou
s.js?load=effects,dragdrop');

to the

$page['scripts'] = array('Tree.js','snmp_builder.js','DynTable.js','effects.js','dragdrop.js');

in the file jsLoader.php
change

        'class.curl.js' => '',
        'class.rpc.js' => '',
        'class.pmaster.js' => ''
);

to the

        'class.curl.js' => '',
        'class.rpc.js' => '',
        'class.pmaster.js' => '',
        'Tree.js' => '../snmp_builder/',
        'snmp_builder.js' => '../snmp_builder/',
        'DynTable.js' => '../snmp_builder/'
);

Also, to allow using of the different SNMP port instead of default 161 one in the Server: text box
file snmp_builder.php
change

                if (!preg_match('/^[0-9,\.]+$/i', $_REQUEST['server_ip']))

to the

                if (!preg_match('/^[:0-9,\.]+$/i', $_REQUEST['server_ip']))

Than you can use addresses like 192.168.1.1:8161

[vel]

Hello!
I want to create zabbix-template for the switch ZyXEL GS-3012F. I installed the module "SNMP builder". When I select the mib from the list-MIB, I have an error:

.- (is a reserved word): At line 481 in /usr/local/www/zabbix/snmp_builder/mibs/380LR1C0 mib - (is a reserved word): At line 481 in /usr/local/www/zabbix/snmp_builder/mibs/380LR1C0.mib

I don't understand this error. Dashes is inline comments.
/usr/local/www/zabbix/snmp_builder/mibs/380LR1C0.mib:

471: ---------------------------------------------------------------------
472: --
473: --  dot1x Setup
474: --
475: --  for AAA Service
476: --  1. rename radius8021xSetup as dot1xSetup
477: --  2. remove radiusLoginPrecedence (AAA Service: authentication login)
478: --  3. remove radiusAnd8021xServer (AAA Service: radius server setup)
479: --  4. DO NOT change oid for backward compatible
480: --
[COLOR="red"]481: ---------------------------------------------------------------------[/COLOR]
482: --  dot1xSetup
483:         dot1xSetup OBJECT IDENTIFIER ::= { gs3012f 7 }

I attached my MIB-file for ZyXEL GS-3012F.
Version Zabbix: 1.8.2
Verison net-snmp: 5.5
OS: FreeBSD 8.0

Help me please!

[Wonderer]

This is the pure net-snmp error, and is not related with the SNMP Builder.
Anyway I have fixed all errors (at least I hope so).
Please check the attached file.

Also do not forget that this MIB also requires the following other MIBs to work :
Cannot find module (P-BRIDGE-MIB): At line 19 in /usr/share/snmp/mibs/ZYXEL-GS3012F-MIB.txt
Cannot find module (Q-BRIDGE-MIB): At line 21 in /usr/share/snmp/mibs/ZYXEL-GS3012F-MIB.txt
Cannot find module (BRIDGE-MIB): At line 23 in /usr/share/snmp/mibs/ZYXEL-GS3012F-MIB.txt
Cannot find module (DISMAN-PING-MIB): At line 31 in /usr/share/snmp/mibs/ZYXEL-GS3012F-MIB.txt
Cannot find module (BRIDGE-MIB): At line 42 in /usr/share/snmp/mibs/ZYXEL-GS3012F-MIB.txt

[HunterSeeker]

I'd love to be able to use something like this. I attempted the above-mentioned fix but I don't believe I have a jsLoader.php file on my zabbix 1.8.2. Presently SNMPBuilder shows up, no errors occur, at least none that I can see from the web GUI. Input of information results in no output though, the tables remain blank.

[Axilla]

please someone get this working for 1.8.2

[SpiderX]

its working - http://www.zabbix.com/forum/showpost...&postcount=108

[Axilla]

its working - http://www.zabbix.com/forum/showpost...&postcount=108

Thanks! I'll work on that this weekend

[Peteris]

Does it works on newer builds like 1.8.3?

[Axilla]

Does it works on newer builds like 1.8.3?

yes the fix is actually for 1.8.3 but they suggest that it will work on 1.8.2 too.. So it you're good to go, i'll test on 1.8.2 this weekend and inform.

[a.vaskin]

Hi all! Please help me to search mibs for hp printers (CLJ 2600n, CLJ 3525, LJ3030, Lj3300). I trayed rfc-1759, clj4500, but data recieved not correctly.

[nelsonab]

Hi all! Please help me to search mibs for hp printers (CLJ 2600n, CLJ 3525, LJ3030, Lj3300). I trayed rfc-1759, clj4500, but data recieved not correctly.

A.vaskin, start a new thread, please do not hijack this one. Also I would suggest including more information about what you have tried and what you are trying to accomplish, maybe someone will have some ideas for you then.

[HunterSeeker]

Hi everyone!
Good job fixing this on 1.8.2! I got most everything working. I hope this add-on gets picked up by Zabbix, it's the one thing other products have over it.

Anyway, I have a BladeCenter in my environment which I am trying to monitor using SNMP, I've added the proper MIBS to the directory. It seems though, that something has gone wrong. Whenever I try to get info out of the BladeCenter, I only get blank tables. Apache is spitting out the following error:

Timeout: No Response from  x.x.x.x
Timeout: No Response from x.x.x.x

This does not happen when I do an snmpwalk manually, for example:

snmpwalk -v 1 -m BLADE-MIB -Os -c community x.x.x.x mmTemp

results in the expected:

mmTemp.0 = STRING: "36.00 Centigrade"

[HunterSeeker]

For anyone who might have the problem I did in the future, I've figured it out! It turns out SNMP Builder uses SNMP v2c by default. We use v1 in my environment. Adjusting snmp_builder.php to use v1 allowed the BladeCenter to respond. It's kind of a niche issue but hopefully someone finds this solution useful.