Zabbix 1.4.4 - Monitoring Network on Windows

[Clausft]

Hi

Can someone help me with an example on a item that are working with zabbix 1.4.4.

the zabbix agent is giving me errors back saying "Not supported by ZABBIX agent"

The agent config file have those two lines, is that correct?

PerfCounter=NetIn,"\Network Interface(Realtek RTL8139/810X Family PCI Fast Ethernet NIC)\Bytes Received/Sec",60

PerfCounter=NetOut,"\Network Interface(Realtek RTL8139/810X Family PCI Fast Ethernet NIC)\Bytes Sent/Sec",60


Thanks alot.

Best regards

Claus T.

[rs26]

What is the key for item ?

[Clausft]

sry forgot that,

The amount of traffic received/send on that server.

[NOB]

Hi

Can someone help me with an example on a item that are working with zabbix 1.4.4.

the zabbix agent is giving me errors back saying "Not supported by ZABBIX agent"

The agent config file have those two lines, is that correct?

PerfCounter=NetIn,"\Network Interface(Realtek RTL8139/810X Family PCI Fast Ethernet NIC)\Bytes Received/Sec",60

PerfCounter=NetOut,"\Network Interface(Realtek RTL8139/810X Family PCI Fast Ethernet NIC)\Bytes Sent/Sec",60

Nobody can tell it, unless somebody has exactly the same network adapter
installed.
This part is depending on the installed or on-board network adapter
and on the language setting of the OS, e.g. german incl. umlauts,
etc.

You should start "perfmon" on the Windows box you want to minotor, select
the counter and add it to the display.
Then you see the correct name to use. The spelling, e.g., the number of
spaces, etc. must be 100% correct - computers are not smart.

Try a zabbix_get -s server -k 'perf_counter[name]' and
correct the spelling until it works

Hope this helps

Norbert.