snmp problem with insight manager

[fritz]

Hi team,

I try to monitor hp proliant ml350 g6 servers using zabbix. hp insight manager is installed on all my windows 2008 r2 servers and seems working.

SNMP is configured with the good community : snmpstatus -v 2c -c public 10.205.211.11
[UDP: [10.205.211.11]:161->[0.0.0.0]]=>[Hardware: Intel64 Family 6 Model 26 Stepping 5 AT/AT COMPATIBLE - Software: Windows Version 6.1 (Build 7600 Multiprocessor Free)] Up: 0:37:15.06
Interfaces: 27, Recv/Trans packets: 15872091/2799515 | IP: 5073373/1068442
8 interfaces are down!

I can get some data from my servers but when i use the template HP Insight, there is some problem :

Zabbix server : /var/log/zabbix/zabbix_server.log

2357:20110307:132739.607 Item [SERVTD1T_ILO2:HPcontrollerRollupStatus.1] error: SNMP error [(noSuchName) There is no such variable name in this MIB.]
  2359:20110307:132740.616 Item [SERVTD1T_ILO2:HPcontrollerRollupStatus.2] error: SNMP error [(noSuchName) There is no such variable name in this MIB.]
  2360:20110307:132741.614 Item [SERVTD1T_ILO2:HPenclosureRollupStatus0.1] error: SNMP error [(noSuchName) There is no such variable name in this MIB.]
  2358:20110307:132742.611 Item [SERVTD1T_ILO2:HPenclosureRollupStatus0.2] error: SNMP error [(noSuchName) There is no such variable name in this MIB.]
  2356:20110307:132743.611 Item [SERVTD1T_ILO2:HPenclosureRollupStatus1.1] error: SNMP error [(noSuchName) There is no such variable name in this MIB.]
  2356:20110307:132744.616 Item [SERVTD1T_ILO2:HPenclosureRollupStatus1.2] error: SNMP error [(noSuchName) There is no such variable name in this MIB.]

Is there anything special to set up ? or the mib changed with this version ?
I use the iLo 2 communication port to monitor the hosts.

Thanks in advance ...

[fritz]

I believe there is some problems with the template with zabbix 1.8.4 and a proliant ml 350. Some mibs seems to be change :

snmpget -v 2c -c public 10.205.211.11 .1.3.6.1.4.1.232.3.2.2.1.1.6.0
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: SNMPv2-SMI::enterprises.232.3.2.2.1.1.6.0

I found this OID in the Insight template to monitor HW: Disk Controller 1 Status

Any feedback on this ?

Thanks

[fritz]

No ideas ?

David