SNMP Discovery Rule Issue Zabbix 4.2

[arovah]

Dear Colleagues,

We have issue in Zabbix discovery rule, we are using zabbix version 4.2.1 and the topology is devices/hosts -> zabbix proxy -> zabbix server -> database and agents interface setup using SNMPV2.
There are some hosts can not get item from discovery rule in zabbix proxy, if i run snmpwalk from Zabbix Proxy to host the result is ok snmpwalk able to run query, but in zabbix web not appears item yet.
All devices registered on Zabbix are the same using Template Module Interfaces SNMPv2_SCM. Is there a manual way to get item faster ? Please your any advice and suggest ?




[mzi@zabbix-proxy02 ~]$ /usr/bin/snmpwalk -v 2c -c passwrod 172.27.xx.xx
SNMPv2-MIB::sysDescr.0 = STRING: BDCOM(tm) S2928EF Software, Version 81073
hardware version: A
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.3320.1.458.0
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (1075334261) 124 days, 11:02:22.61
SNMPv2-MIB::sysContact.0 = STRING: [email protected]
SNMPv2-MIB::sysName.0 = STRING: JATENG-ODC.BANTUL.KOTA-S2928EF-CPE-01
SNMPv2-MIB::sysLocation.0 = STRING: JATENG-ODC.BANTUL.KOTA-S2928EF-CPE-01
SNMPv2-MIB::sysServices.0 = INTEGER: 6
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1075334265) 124 days, 11:02:22.65
SNMPv2-MIB::sysORID.1 = OID: SNMPv2-SMI::enterprises.3320.1.458.0
SNMPv2-MIB::sysORDescr.1 = STRING: BDCOM(tm) S2928EF Software, Version 81073
hardware version: A
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (1075334268) 124 days, 11:02:22.68
IF-MIB::ifNumber.0 = INTEGER: 31
IF-MIB::ifIndex.165 = INTEGER: 165
IF-MIB::ifIndex.166 = INTEGER: 166
IF-MIB::ifIndex.167 = INTEGER: 167
IF-MIB::ifIndex.168 = INTEGER: 168
IF-MIB::ifIndex.169 = INTEGER: 169
IF-MIB::ifIndex.170 = INTEGER: 170
IF-MIB::ifIndex.171 = INTEGER: 171
IF-MIB::ifIndex.172 = INTEGER: 172
IF-MIB::ifIndex.173 = INTEGER: 173
IF-MIB::ifIndex.174 = INTEGER: 174
IF-MIB::ifIndex.175 = INTEGER: 175
IF-MIB::ifIndex.176 = INTEGER: 176
IF-MIB::ifIndex.177 = INTEGER: 177
IF-MIB::ifIndex.178 = INTEGER: 178
IF-MIB::ifIndex.179 = INTEGER: 179
IF-MIB::ifIndex.180 = INTEGER: 180
IF-MIB::ifIndex.181 = INTEGER: 181
IF-MIB::ifIndex.182 = INTEGER: 182
IF-MIB::ifIndex.183 = INTEGER: 183
IF-MIB::ifIndex.184 = INTEGER: 184
IF-MIB::ifIndex.185 = INTEGER: 185
IF-MIB::ifIndex.186 = INTEGER: 186
IF-MIB::ifIndex.187 = INTEGER: 187
IF-MIB::ifIndex.188 = INTEGER: 188
IF-MIB::ifIndex.189 = INTEGER: 189

Thank you

[arovah]

up, is there any one can help me?

[arovah]

up, is there any one can help me?

[vijayk]

Can you post the discovery rule here which you created?

[arovah]

hello vijayk,

Thank you for your response, here it is the discovery rules detail

[vijayk]

Change the update interval value from 30m to less. It might be helpful.