ipmi agent getting incorrect value

[mykolaq]

Hello! I wanna create template for some of ipmi sensors for supermicro servers, but I have some problem with getting incorrect values-sensors. For example:
ipmitool (zabbix ipmi agent)

PS Status        | 0x0        | discrete   | 0x00ff| na        | na        | na        | na        | na        | na

We have 1 sensor for Power Supply and status is 0 (but really is ok and two), but for majority of servers ok is like this:

PS1 Status       | 0x1        | discrete   | 0x0100| na        | na        | na        | na        | na        | na
PS2 Status       | 0x1        | discrete   | 0x0100| na        | na        | na        | na        | na        | na

. This situation is not good for creating triggers. When I get supermicro util (below is SMCIPMITool out for problematic server) :

[SlaveAddress = 78h] [Module 1]
 Item                           |                          Value
 ----                           |                          -----
 Status                         |               [STATUS OK](01h)
 Input Voltage                  |                        229.0 V
 Input Current                  |                         0.67 A
 Main Output Voltage            |                        12.15 V
 Main Output Current            |                          9.5 A
 Temperature 1                  |                        28C/82F
 Temperature 2                  |                        33C/91F
 Fan 1                          |                       9389 RPM
 Main Output Power              |                          115 W
 Input Power                    |                          141 W
 PMBus Revision                 |                         0x0001
 PWS Serial Number              |                P7211CF34LT1575
 PWS Module Number              |                    PWS-721P-1R
 PWS Revision                   |                         REV1.2

 [SlaveAddress = 7Ah] [Module 2]
 Item                           |                          Value
 ----                           |                          -----
 Status                         |               [STATUS OK](01h)
 Input Voltage                  |                        229.5 V
 Input Current                  |                         0.71 A
 Main Output Voltage            |                        12.06 V
 Main Output Current            |                        10.62 A
 Temperature 1                  |                        32C/90F
 Temperature 2                  |                        34C/93F
 Fan 1                          |                       9389 RPM
 Main Output Power              |                          128 W
 Input Power                    |                          153 W
 PMBus Revision                 |                         0x0001
 PWS Serial Number              |                P7211CA13VT3299
 PWS Module Number              |                    PWS-721P-1R
 PWS Revision                   |                         REV1.0

Model of server with problem - X8DTN -F. Is it problem in ipmitool?
I can create different triggers for different model, but It seems for me it's not a good way.

[mykolaq]

Not actual, some mainboards have this problem