Table of Contents
14 Host navigator
Description
These parameters and the possible property values for the respective dashboard widget field objects allow to configure the Host navigator widget in dashboard.create and dashboard.update methods.
Widget fields properties are not validated during the creation or update of a dashboard. This allows users to modify built-in widgets and create custom widgets, but also introduces the risk of creating or updating widgets incorrectly. To ensure the successful creation or update of the Host navigator widget, please refer to the parameter behavior outlined in the tables below.
Parameters
The following parameters are supported for the Host navigator widget.
| Parameter | type | name | value | |
|---|---|---|---|---|
| Refresh interval | 0 | rf_rate | 0 - No refresh; 10 - 10 seconds; 30 - 30 seconds; 60 - (default) 1 minute; 120 - 2 minutes; 600 - 10 minutes; 900 - 15 minutes. |
|
| Host groups | 2 | groupids.0 | Host group ID. Note: To configure multiple host groups, create a dashboard widget field object for each host group with an incremented number in the property name. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Hosts | 1 | hosts.0 | Host name or pattern. Note: To configure multiple hosts, create a dashboard widget field object for each host with an incremented number in the property name. For multiple hosts, the parameter Host groups must either be not configured at all or configured with at least one host group that the configured hosts belong to. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Host status | 0 | status | -1 - (default) Any; 0 - Enabled; 1 - Disabled. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Host tags | ||||
| Evaluation type | 0 | host_tags_evaltype | 0 - (default) And/Or; 2 - Or. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Tag name | 1 | host_tags.0.tag | Any string value. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Host tags This parameter is not supported if configuring the widget on a template dashboard. |
|
| Operator | 0 | host_tags.0.operator | 0 - Contains; 1 - Equals; 2 - Does not contain; 3 - Does not equal; 4 - Exists; 5 - Does not exist. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Host tags This parameter is not supported if configuring the widget on a template dashboard. |
|
| Tag value | 1 | host_tags.0.value | Any string value. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Host tags This parameter is not supported if configuring the widget on a template dashboard. |
|
| Severity | 0 | severities.0 | 0 - Not classified; 1 - Information; 2 - Warning; 3 - Average; 4 - High; 5 - Disaster. Default: empty (all enabled). Note: To configure multiple values, create a dashboard widget field object for each value with an incremented number in the property name. |
|
| Show hosts in maintenance | 0 | maintenance | 0 - (default) Disabled; 1 - Enabled. |
|
| Show problems | 0 | show_problems | 0 - All; 1 - (default) Unsuppressed; 2 - None. |
|
| Group by | ||||
| Attribute | 0 | group_by.0.attribute | 0 - Host group; 1 - Tag value; 2 - Severity. Note: The number in the property name references attribute order in the grouping attribute list. Parameter behavior: - required if configuring Group by |
|
| Value | 1 | group_by.0.tag_name | Any string value. Note: The number in the property name references attribute order in the grouping attribute list. Parameter behavior: - required if configuring Group by and Attribute is set to "Tag value" |
|
| Host limit | 0 | show_lines | Possible values range from 1-9999. Default: 100. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Reference | 1 | reference | Any string value consisting of 5 characters (e.g., ABCDE or JBPNL). This value must be unique within the dashboard to which the widget belongs.Parameter behavior: - required |
|
Examples
The following examples aim to only describe the configuration of the dashboard widget field objects for the Host navigator widget. For more information on configuring a dashboard, see dashboard.create.
Configuring a Host navigator widget
Configure a Host navigator widget that displays hosts grouped by their host group and, then, by the "City" tag value.
{
"jsonrpc": "2.0",
"method": "dashboard.create",
"params": {
"name": "My dashboard",
"display_period": "30",
"auto_start": "1",
"pages": [
{
"widgets": [
{
"type": "hostnavigator",
"name": "Host navigator",
"x": "0",
"y": "0",
"width": "4",
"height": "5",
"view_mode": "0",
"fields": [
{
"type": 2,
"name": "groupids.0",
"value": 2
},
{
"type": 2,
"name": "groupids.1",
"value": 4
},
{
"type": 0,
"name": "group_by.0.attribute",
"value": 0
},
{
"type": 0,
"name": "group_by.1.attribute",
"value": 1
},
{
"type": 1,
"name": "group_by.1.tag_name",
"value": "City"
},
{
"type": 1,
"name": "reference",
"value": "SWKLB"
}
]
}
]
}
],
"userGroups": [
{
"usrgrpid": 7,
"permission": 2
}
],
"users": [
{
"userid": 1,
"permission": 3
}
]
},
"id": 1
}Response: